Testing the blast wave model with Swift GRBs

The complex structure of the light curves of Swift GRBs (e.g. superimposed flares and shallow decay) has made their interpretation and that of the blast wave caused by the burst, more difficult than in the pre-Swift era. We aim to constrain the blast wave parameters: electron energy distribution, p, density profile of the circumburst medium, k, and the continued energy injection index, q. We do so by comparing the observed multi-wavelength light curves and X-ray spectra of a Swift sample to the predictions of the blast wave model.     

Feasibility assessment of optical technologies for reliable high capacity feeder links

Space telecom scenarios like data relay satellite and broadband/broadcast service providers require reliable feeder links with high bandwidth/data rate for the communication between ground station and satellite. Free space optical communication (FSOC) is an attractive alternative to microwave links, improving performance by offering abundant bandwidth at small apertures of the optical terminals. At the same time Near-Earth communication by FSOC avoids interference with other services and is free of regulatory issues. The drawback however is the impairment by the laser propagation through the atmosphere at optical wavelengths. Also to be considered are questions of eye safety for ground personnel and aviation. In this paper we assess the user requirements for typical space telecom scenarios and compare these requirements with solutions using optical data links through the atmosphere. We suggest a site diversity scheme with a number of ground stations and a switching scheme using two optical terminals on-board the satellite. Considering the technology trade-offs between four different optical wavelengths we recommend the future use of 1.5 µm laser technology and calculate a link budget for an atmospheric condition of light haze on the optical path. By comparing link budgets we show an outlook to the future potential use of 10 µm laser technology.     

曲柄连杆机构可靠性及其关联失效控制

为了提高机械系统的整机可靠性,对机械系统的机构动作故障及其关联失效实现有效控制,在该领域对动作可靠性惟象研究基础上.在机构动作可靠性机理、失效模式、故障危害及其失效控制方面作了初步探讨;通过失效机理研究,借助集合理论,从广义变形研究出发,由Gershgorin圆盘定理及通过变形设计和组合加工对引起特征值病态的像集合中的非线性改造为线性后,提出的包容模型,实施以装配状态和实际使用状态为目标的变形控制方法,对曲柄连杆机构的实际应用表明:能够有效控制其可靠性及其关联失效.     

SiC/SiC复合材料氧化退化研究进展

针对高速推进系统温度测量传感器的设计方法、测量误差等核心问题,综述了现阶段高速推进系统接触式和非接触式温度测量的方法。其中,重点综述了辐射与红外测量、可调谐二极管激光吸收光谱(TDLAS)、相干反斯托克斯拉曼散射(CARS)及温度敏感涂料(TSP)等非接触温度测量技术在高速推进系统应用的研究进展和发展趋势,并分析了上述温度测量技术存在的问题。     

一种基于链路状态的舱内环境自适应干扰消除算法

针对舱内无线光传输系统多种干扰问题,比如多径损耗和突发干扰等,提出一种基于链路状态的自适应干扰消除技术,该方法分析舱内链路状态,完成链路状态估计,采用环境自适应的变遗忘因子RLS（recursive least squares）算法,针对不同链路状态采取差异化的干扰消除策略,以提高舱内通信质量。仿真结果表明：该算法在尽力避免增加算法复杂度的条件下,相对于传统固定遗忘因子算法,在平稳状态下优先保证传输的误码性能,在链路状态变化时具有更好的收敛性能,灵活适应了舱内多种传输情况。     

Evaluation of airborne data link communication

An experimental prototype of a cockpit data link communication interface (modified Navigation Display (ND) and Multi-purpose Control and Display Unit (MCDU)) was developed and tested in an Airbus A340 Full Flight Simulator. 8 crews (16 professional pilots) performed simulator flights in a mixed voice and data link scenario. After each experiment video recordings were presented to the pilots and they were asked to estimate subjective strain (NASA task load index) and situational aspects retrospectively. Results show an increase in subjective strain and a decrease of ‘feeling of sovereignty’ and situation awareness under data link conditions. The effect is similar to the one caused by higher workload.     

SerDes器件在遥感相机系统中的应用

基于当前遥感相机谱段数量的不断增加、分辨率的不断提升等方面造成的数据传输问题,分析了目前广泛应用的并行数据传输系统所面临的技术瓶颈,提出采用串行发送/解串(SerDes)方式加以替代的方案,通过对比分析,指出采用该方式传输数据的优点,进而阐述文章所采用的串行发送/解串芯片-TLK2711的工作原理、传输协议等,最终通过试验证明了其在遥感相机系统中应用的可行性,为后续遥感相机研制提供参考。     

基于相互测距信息的机群组网协同定位技术

在网络中心战条件下,针对无GPS(Global Positioning System)时如何提高机群的导航定位精度问题,构建了以机载数据链和惯导系统为核心的协同定位系统,设计了协同定位系统的测距方案,分析了协同定位过程中的时间同步问题,提出了一种基于机间相互测距信息的机群组网协同定位方法.该方法利用几何图形平移旋转来估计机群各飞机的惯导系统定位误差.仿真表明:该方法可以用于长时间估计惯导位置误差,有效延缓惯导位置误差的发散速度,当5架飞机协同定位时,机群惯导位置精度将提高2倍左右.     

基于轨迹方法的AFDX网络路由配置算法

针对航空电子全双工交换式以太网(AFDX,Avionics Full Duplex Switched Ethernet)的网络关键技术——虚拟链路(VL,Virtual Link)的静态路由算法,提出了一种基于AFDX轨迹方法的VL路由配置算法——TRJ算法,保证配置VL的端端确定性最大延迟满足给定的时延约束.TRJ算法计算每条VL基于轨迹方法得到的初始延时约束比,按照延时约束比从小到大的顺序结合轨迹方法进行VL静态路由配置.在AFDX网络典型配置下,将该路由算法与最小跳路由和均衡路由算法进行比较,结果表明最小跳路由算法用了最少的资源,均衡路由算法平衡了网络流量,但只有该算法保证了所有VL的端端最大延迟满足时延约束,证明该算法的有效性.     

基于谐波传动的星间链路天线驱动机构设计研究

星间链路天线驱动机构(GDA)具有长寿命、大驱动力矩、高精度指向和适应复杂空间环境的任务要求.谐波传动具有减速比大、承载能力大、传动精度高等优点,在航天、航空等多个领域广泛应用.分析了主要设计约束,比较了三种双轴构型的优缺点,给出了基于谐波传动的GDA单轴驱动器的结构框图,对电机、谐波减速器、测角传感器的选择以及机电热接口的设计要点进行了分析,论述了紧凑而轻量化的结构布局、长寿命润滑、高精度指向等关键技术,介绍了长寿命和高精度捕获跟踪性能的验证试验方案.