现代集合住宅户型设计中功能空间分析感悟

本文从集合住宅的发展谈起，简单提出几点设计新概念，重点对住宅户型设计中的功能空间进行探讨和分析。     

综合运用"四个机制"促进航空装备研制

根据航空武器装备研制应当建立竞争、评价、监督、激励“四个机制“的规定,结合本企业实际,就综合运用“四个机制“、促进航空装备研制提出了见解与建议.     

钣金制件表面的相贯线求作方法

本文提出钣金制件表面相贯线求作的新方法。     

图样的知识目标分类与例证性分析

根据教育目标分类学的观点分解课程教学目标，再分别对分解的目标进行例证性分析，能更客观地验证教育目标的实效性和教育过程的可行性。本文通过对图样的知识目标分类与例证性分析，为工程图学教育目标检测做一尝试。     

Aiming at a 1-cm Orbit for Low Earth Orbiters: Reduced-Dynamic and Kinematic Precise Orbit Determination

The computation of high-accuracy orbits is a prerequisite for the success of Low Earth Orbiter (LEO) missions such as CHAMP, GRACE and GOCE. The mission objectives of these satellites cannot be reached without computing orbits with an accuracy at the few cm level. Such a level of accuracy might be achieved with the techniques of reduced-dynamic and kinematic precise orbit determination (POD) assuming continuous Satellite-to-Satellite Tracking (SST) by the Global Positioning System (GPS). Both techniques have reached a high level of maturity and have been successfully applied to missions in the past, for example to TOPEX/POSEIDON (T/P), leading to (sub-)decimeter orbit accuracy. New LEO gravity missions are (to be) equipped with advanced GPS receivers promising to provide very high quality SST observations thereby opening the possibility for computing cm-level accuracy orbits. The computation of orbits at this accuracy level does not only require high-quality GPS receivers, but also advanced and demanding observation preprocessing and correction algorithms. Moreover, sophisticated parameter estimation schemes need to be adapted and extended to allow the computation of such orbits. Finally, reliable methods need to be employed for assessing the orbit quality and providing feedback to the different processing steps in the orbit computation process. This revised version was published online in August 2006 with corrections to the Cover Date.     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

通用模拟示波器故障的分析与诊断

本文将通用模拟示波器电路分成五部分，总结和分析了每一部分电路故障可能引起的几种异常显示，给出了每一部分电路故障诊断方法及在相应电路中出现故障的常见器件，对有些故障与故障现象之间的因果关系做了进一步分析。     

多点法测量形状误差的补偿控制系统

经过对误差分离技术理论进行了分析之后,又对误差补偿技术进行了研究,并建立了多点法测量形状误差的补偿控制系统。通过补偿主轴径向误差运动,提高了工件的圆度误差和圆柱度误差。     

纵向短周期模态试飞方法和选择

对几种纵向短周期模态试飞方法及其适用性进行了初步分析。结合实际飞行经验,提出了初步判断飞机短周期特性及选择试飞方法。     

减少机床噪声污染的方法

噪声污染已成为世界三大污染之一.在工业企业中机床噪声是重要的噪声污染源之一.本文主要从机床的齿轮传动、轴承的选用和齿轮箱的结构等方面对机床噪声产生的影响以及提出相应的降噪措施进行了探讨.从而降低机床噪声,保障工人身心健康,改善车间工作环境.