蜻蜓起飞过程飞行特征实验

针对蜻蜓自由起飞过程和准自由起飞过程进行实验观测,采用两个光轴相互垂直的高速摄像机进行拍摄,通过特征点匹配和三维重构方法准确地捕捉了两种起飞过程中蜻蜓身体和翅膀的运动参数,并进行运动特征分析与对比。实验结果表明:蜻蜓在自由起飞过程中采用同步振翅,离地后逐步转换成异步振翅(约110°),最大瞬时竖直加速度可以达到20m/s2;在准自由起飞过程中采用异步振翅(相位差180°),之后相位差逐步降低,最大瞬时竖直加速度为12m/s2;此外发现同步振翅、大攻角下拍及大拍动角有利于升力的产生。      

毫秒脉冲等离子体激励改善飞翼的气动性能实验

在来流速度为30m/s时,进行了毫秒脉冲介质阻挡放电等离子体激励改善飞翼气动性能的风洞实验.等离子体激励器布置在飞翼前缘,峰峰值电压为9.5kV时,放电的脉冲能量在0.1mJ/cm量级.通过六分量测力天平测力研究了脉冲激励频率和占空比对升/阻力系数、升阻比和俯仰力矩系数的作用效果.结果表明:等离子体激励可以有效改善飞翼大攻角气动特性;在最佳无量纲脉冲激励频率F+≈1时,临界失速迎角由14°提高到17°,最大升力系数提高10%;占空比对流动控制效果影响较大,减小占空比可以降低能耗,实验中最佳占空比为5%;俯仰力矩系数的变化表明施加等离子体激励改善了飞翼纵向静稳定性.      

Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces

With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.     

立方体星的技术发展和应用前景

系统论述了立方体星技术发展的三个阶段;从2010-2013年已成功发射的立方体星与纳卫星中挑选了10颗典型卫星,研究分析其技术水平、应用价值和特点优势;并重点论述了立方体纳卫星的应用;最后预测了立方体纳卫星的未来应用前景。     

手工计划模拟CDA燃油的节省

飞机在飞行中,普遍采用的阶梯下降程序,这需要航空器频繁改变推力、增加下降角度和调整高度,这样加大了飞行员和管制员的工作压力,同时对最后阶段飞行的油量也有增加。通过对连续下降进近（CDA）的现状进行分析,给出连续下降进近相对传统进近方式的优势,并结合航空公司手工飞行计划制作的方法及原理对连续下降进近在最后阶段飞行时间和燃油方面的节约进行验证。     

Periodic relative orbits of two spacecraft subject to differential gravity and electrostatic forcing

Coulomb forces between charged close-flying satellites can be used for formation control, and constant electric potentials enable static equilibria solutions. In this work, open-loop time-varying potential functions, which produce periodic, two-craft, Coulomb formation motions are demonstrated for the first time. This is done in the rotating Hill-Frame, with linearized gravity, and craft position components assumed in the form of simple harmonic oscillators. Substitution of the oscillatory functions into the dynamics, further constrains these functions, and yields necessary potential histories, to produce the periodic flow. The assumed position functions, however, are not arbitrary, since the dynamical model restricts what oscillatory trajectories are allowed. Specifically, a Hill-Frame integral of motion is derived, and this is used to show certain candidate periodic functions to be inadmissible. The system dynamics are then linearized to expose stability properties of the solutions, and it is established that asymptotic stability is impossible for all orbit families. Finally, the degree of instability in the assumed motions, over free parameter ranges, is determined numerically via the Floquet multipliers of the associated full-cycle state-transition matrices.     

Hybrid optimization for multiple-impulse reconfiguration trajectories of satellite formation flying

A hybrid optimization method is developed for fuel-optimal reconfigurations of a group of satellites flying in formation. The genetic algorithm performs a global search to find two-impulse trajectories, and primer vector analysis finds multiple-impulsive local optimal trajectories with the two-impulse trajectories as initial guesses. Hybrid optimization finds globally optimal trajectories for formation reconfigurations, including formation resizing, reassignment and reorientation maneuvers. Multiple-impulse trajectories reduce the fuel consumption from the two-impulse trajectories by up to 4.4% for those maneuvers. In real missions, satellites can follow two-impulse trajectories to gain the advantage of a smaller number of impulses, with the cost of slightly more propellant. The qualitative characteristics of the optimal trajectories are analyzed from the number of optimal trajectories found by hybrid optimization.     

俯仰轴飞行品质中频域准则的计算与模拟

简要介绍了军用飞机飞行品质MIL—STD—1797A中有关俯仰轴频域难则的要求和原由。提出了对这些难则的理论计算和模拟试验方法。并以某飞机为例，利用所提出的方法，对其飞行品质进行了计算和模拟。结果表明，所提出的计算和模拟方法是合理的。最后，讨论了驾驶员模型形式对俯仰轴飞行品质的影响。     

穿越微下冲气流的飞翼布局无人机控制方法

微下冲气流是最危险的低空风切变形式,为在起降阶段安全穿越该气流,飞翼布局的无人机控制律应具有快速响应能力和良好的鲁棒性。针对大展弦比飞翼布局无人机舵面附加升力大和低速状态俯仰操纵效能低的特点,提出了舵面附加升力和机体气动力相结合的复合控制方案,改进了以输出误差为参考量的非线性指令分配策略,设计了基于迎角保护的指令分配策略。将风干扰和模型的不确定性视为未知扰动,采用自抗扰控制(ADRC)理论设计飞翼布局无人机非线性控制律,使之对风干扰和模型的不确定性进行估计补偿。仿真结果表明,复合控制与ADRC相结合的方法加速了航迹倾角的单位阶跃响应速度,使上升时间缩短了64%,同时能够实现对风干扰的有效观测和补偿,使高度损失低于2m;能够在风切变中有效保护迎角,使其维持在5.5°以内。因此,该方法能够为飞翼布局无人机安全平稳地穿越微下冲气流提供一种参考方案。     

基于LQG/LTR的飞翼飞机阵风减缓系统研究

根据我国《运输类飞机适航标准》的要求,采用有理谱逼近的方法建立了Von Karman大气紊流的数值仿真模型;详细推导了多变量系统鲁棒性的衡量方法,给出了开环系统奇异值曲线形状与闭环系统鲁棒性的关系;针对飞翼飞机多操纵面的特点,将控制分配技术与LQG/LTR控制器结合在一起,同时兼顾了对飞机过载和翼根弯矩的减缓。仿真结果表明,所设计的控制系统在对飞机过载减缓的同时,也对机翼的翼根弯矩进行了有效的减缓。