关于N=31～64位最佳PCM群同步码的研究

本文是关于N=31至64位最佳PCM群同步码研究成果的总结报告。这些最佳码是世界上迄今为止(在该范畴内)的最新成果。文中给出了N=31～64位最佳群同步码的码组图样、误同步概率和主要特征参数。此外,还阐述了歧码问题和某些关键理论。     

多点压力扫描阀测量系统在激波／湍流边界层干扰实验中的应用

多点压力测量是航空气动力研究及高性能流体机械研究中的重要测试手段。利用计算机和多点压力扫描阀系统，可以高效地完成这项任务，并可能在实验中实现数据采集及整个实验过程的自动化。我们利用ＨＰ１０００／Ａ７００计算机－ＨＰ２２５０－测控装置－压力传感器－高速扫描阀组成的测量控制系统，在超音速风洞内对激波／湍流边界层干扰产生的流场进行了快速多点压力数据采集，并取得了可靠的结果。本文对测试和校正过程中的程序设计、测试方法和应用经验进行了介绍。     

改进的次时间最优控制

本文在[1][2]基础上进一步探讨了次时间最优控制的改进问题,深入地阐明了次时间最优控制的某些特性后,提出了一个新的改进的设计方法。按照这种方法设计控制系统,不但实用而且可以大幅度提高次时间最优控制的最优性。并用实例比较了各种方法,证明了本文提出的方法的优越性。本文提出的方法应用于工程设计,对于提高系统的最优性是非常有效的。     

门限自回归模型参数的局部正交设计寻优法

在采用点值图确定门限区间个数的基础上，对门自回归模型中门限值、滞后步长、各门限区间模型阶数，利用正交设计方法寻优，计算工作量锐减，却可得到精度较高的预报模型。     

基于Pro/E软件的卫星三维建模方法的探讨

主要对基于Pro/E软件的卫星三维建模和高效率、高可靠性、低成本的总装设计方法等进行了初步的研究和探讨。     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

自动测试系统集中互连信号优化设计

基于对自动测试系统被测设备的信号种类及数量的分析,构建了被测对象测试信号数学模型,分析了不同测试模式下的测试资源需求情况,并从提高测试系统性价比这一基本原则出发,提出了自动测试系统硬件平台测试资源优化配置的理论计算方法,对自动测试系统的工程设计具有指导意义。     

基于VXI总线的武器控制盒综合测试系统设计

介绍了基于VXI总线技术所设计的武器控制盒综合检测系统,并给出了系统总体结构框架,重点说明了硬件构成和软件设计方法。实际应用表明,此系统具有测试精度高、操作便利以及智能化程度高的特点。     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

电子设备的"三防"设计

本文针对电子设备的"三防"性能设计问题,从不同方面阐述实现电子设备的"三防"性能的方法和措施.