翻滚非合作目标逼近与跟踪的轨道和姿态控制

面向近距离逼近与捕获翻滚非合作目标的在轨服务空间清理任务需求,研究了航天器非合作式交会对接的轨道和姿态控制问题。在控制输入受限约束下,考虑存在参数不确定性和外部扰动的情况,结合滑模控制和自适应控制技术,分别进行鲁棒自适应位置和姿态控制器设计。利用自适应控制估计参数不确定性、未知干扰上界以及滑模控制反馈系数矩阵,提高了系统的鲁棒性。通过李雅普诺夫理论证明了系统在控制器作用下全局一致最终有界稳定。仿真结果验证了控制器的有效性,能够有效解决与高速旋转非合作目标的稳定相对位姿关系建立的难题。     

一种基于参数控制的低轨星载接收机载波跟踪算法CSCD

低轨星座接收机面临大多普勒频移及频繁快速换星等设计约束,对其载波跟踪环路设计提出了较高的动态适应性与跟踪精度要求。针对以上问题,提出了一种基于参数控制的载波跟踪算法。该算法引入环路控制因子参数,将环路滤波器分为牵引和跟踪两阶段。基于理论建模推导环路控制因子的最优参数配置原则,指导实现牵引和跟踪两种状态滤波器的协同配合,在牵引阶段有效引导大多普勒信号快速入锁,在跟踪阶段精确估计载波频移参数,实现基于低轨星载平台的GNSS信号快速准确跟踪。理论与仿真结果均表明基于参数控制的载波跟踪算法能够有效提升环路的动态适应性与跟踪精度,满足低轨星载接收机的设计需求。与传统算法相比,该算法在保证信号跟踪精度的同时,能够将收敛时间缩短78%,且环路设计简单,易于硬件实现。     

Load distribution strategy for multi-lift system with helicopters based on power consumption and robust adaptive game control

It is of great significance to reasonably distribute the slung load to each helicopter while considering difference in power consumption, relative position and interaction comprehensively. Therefore, the load distribution strategy based on power consumption and robust adaptive game control is proposed in this paper. The study is on a “2-lead” multi-lift system of four tandem helicopters carrying a load cooperatively. First, based on the hierarchical control, the load distribution problem is divided into two parts: the calculation of expected cable force and the calculation of the anti-disturbance cable force. Then, aimed at minimizing the maximum equivalent power of helicopter, an optimization problem is set up to calculate the expected cable force. Specially, the agent power model is trained by BP neural network, the safe distance constraint between helicopters is set to 2.5 rotor diameters to reduce aerodynamic interference, and the helicopters with different performance can be considered by introducing the equivalent power factor into the objective function. Next, considering the difference and interaction between helicopters, the robust adaptive differential game control is proposed to calculate the anti-disturbance cable force. Particularly, to solve the coupled Hamiltonian equations, an adaptive solving method for value function is proposed, and its stability is proved in the sense of Lyapunov. The simulation results indicate that the proposed load distribution method based on power consumption is applicable to the entire flight trajectory even there are differences between helicopters. The game control can consider interaction between helicopters, can deal with different objective functions, and has strong robustness and small steady-state error. Based on the entire strategy, the cable force can be reasonably allocated so as to resist disturbance and improve the flight performance of the whole system.     

重型燃气轮机高雷诺数CDA叶型转捩特性数值计算

为研究重型燃气轮机的压气机叶片在高雷诺数工况下的气动性能,基于Gamma-Theta转捩模型的雷诺时均方程对某可 控扩散叶型进行了数值计算。通过对比不控制马赫数与控制马赫数,分析高雷诺数对可控扩散叶型气动性能及转捩特性的影响。 结果表明：在不控制马赫数条件下,在零攻角时,雷诺数从7×10 5 增大为9×10 5 ,总压损失增加了约391.95%;在高雷诺数工况下随 着雷诺数的增大,叶片流动损失不断增大,叶片可用攻角范围减小,同时在叶片吸力面出现激波,干扰转捩的产生。在控制马赫数 条件下,当Ma=0.6时,在零攻角工况下,雷诺数从8.2×10 5 增大为1×10 7 ,总压损失减小了约38.98%,吸力面转捩起始点从4.78%弦 长处前移至1.11%弦长处;在高雷诺数工况下,叶片流动损失随着雷诺数的增大不断减小,吸力面转捩位置前移。     

Gaussian mixture model based adaptive control for uncertain nonlinear systems with complex state constraints

This paper addresses an uncertain nonlinear control system problem with complex state constraints and mismatched uncertainties. A novel Gaussian Mixture Model(GMM) based adaptive PID-Nonsingular Terminal Sliding Mode Control(NTSMC)(GMM-adaptive-PID-NTSMC)method is proposed. It is achieved by combining a GMM based adaptive potential function with a novel switching surface of PID-NTSMC. Next, the stability of the closed-loop system is proved.The main contribution of this paper is that the GMM meth...     

Neural network-based fault diagnosis for spacecraft with single-gimbal control moment gyros

This paper proposes a neural network-based fault diagnosis scheme to address the problem of fault isolation and estimation for the Single-Gimbal Control Moment Gyroscopes(SGCMGs) of spacecraft in a periodic orbit. To this end, a disturbance observer based on neural network is developed for active anti-disturbance, so as to improve the accuracy of fault diagnosis.The periodic disturbance on orbit can be decoupled with fault by resorting to the fitting and memory ability of neural network. Subsequ...     

Conceptual design and flight test of two wingtip-docked multi-body aircraft

To overcome the drawbacks such as large wing deformations, poor performance encountering gusts, limits in taking off and landing, inconvenience of transportation of High-Altitude Long-Endurance (HALE) Unmanned Aerial Vehicles (UAVs), a new conceptual aircraft called wingtip-docked Multi-Body Aircraft (MBA) has attracted lots of attentions. Aiming to investigate the feasibility of this concept, two UAV models were designed, manufactured and connected by a wingtip-docking mechanism, which only allows the relative roll motion between the two aircraft. The trim solution of the two connected aircraft is firstly obtained by solving the developed nonlinear flight dynamic equations, followed by the stability analysis based on the linearized model. The results show that the connected aircraft is inherently unstable and cannot fly without a reasonable flight control system. A set of Proportional-Integral-Derivative (PID) control laws was then developed and implemented in the two experimental aircraft. The success of the flight tests show that the flight control can effectively eliminate the unstable motion and the wingtip-docked MBA is controllable and feasible.     

涡扇发动机全包线加速控制计划改进方法研究

加速控制计划直接影响了发动机的响应速度以及运行安全。为了提高发动机响应能力,提出了一种基于等温度线的发动机全包线加速控制计划。分别针对稳态和动态过程开展相似换算误差分析,证明并验证了关键参数在等风扇进口温度时,具有较高相似换算精度的规律。基于此换算误差理论,提出全包线加速控制计划改进方法,该方法在不同等风扇进口温度下设计多条加速控制计划,再通过线性插值得到包线内不同等温线下的加速控制计划。结果表明,改进后的加速控制计划相比于传统单点优化得到的加速控制计划,发动机加速至最大转速的98%所需的时间减少了7.2%,最大转速提升了1%,且风扇、压气机喘振裕度和涡轮前温度等均未超出限制值。因此,该方法相比于传统单点优化方法既提升了在包线内获取的加速控制计划的精度,又确保了发动机在包线内安全稳定工作的前提下更好的发挥加速性能。     

2.5维编织树脂基复合材料平板多尺度动力学模型修正

在2.5维编织树脂基复合材料多尺度固有振动分析的基础上,开展基于实测结构模态数据的复合材料平板动力学模型修正研究,以获取精准反映其动力学特性的模型。首先,建立复合材料平板固有频率对弹性参数的灵敏度分析方法,分析了平板固有振动特性的主要影响因素;其次,建立基于灵敏度分析的复合材料多尺度动力学模型修正方法,形成了基于MSC.NASTRAN平台的模型修正程序。最后,利用实测结构模态测试数据,实现对复合材料平板动力学模型的修正。结果表明,对关键弹性参数进行修正后,不同边界条件和纱线走向的复合材料平板试验件固有频率实测数据与仿真数据的最大误差由10.44%下降至2.39%,相关性得到了大幅改善。此外,所提出的自由模态测试方案结合动力学模型修正方法,为复合材料等效弹性参数的试验辨识提供了新的技术途径。     

基于显式预测控制的涡扇发动机控制器设计

模型预测控制因其能够较好地处理涡扇发动机约束问题且实现多变量控制而具有较大的应用潜力。为了解决传统模型预测控制算法在实际应用中存在运算量大、实时性较差的问题,基于显式模型预测设计了航空发动机多变量控制器。在控制结构上采用多速率双闭环系统,保证了控制精度;在计算上通过多参数规划将在线优化问题转化为线性函数计算问题,大幅度减少了计算量;在发动机从开环切闭环的过程提出一种增量式切换方法,实现无扰切换。数值仿真和硬件在环仿真结果表明,转速和压比稳态误差分别不超过±0.25%和±1%,控制器在25ms控制周期内能完成计算,满足嵌入式系统实时性要求。