2219铝合金搅拌摩擦焊接头缺陷补焊

对2219铝合金搅拌摩擦焊接头中出现的未焊透和孔洞缺陷进行一次、二次搅拌摩擦补焊实验。结果表明：在合适的补焊工艺参数下,可有效消除接头原有缺陷,获得成形美观,性能良好的接头;随补焊次数的增加,接头软化区域显著增加;含有上述两种缺陷接头一次补焊后拉伸性能显著提高,二次补焊接头相比于一次补焊接头拉伸性能有所降低;含有缺陷的原始接头拉伸时均于缺陷处起裂导致接头塑性较低,补焊后接头都断裂于后退侧热影响区与热机影响区交界处,呈韧性断裂模式。     

国外飞机机轮刹车系统的发展

阐述了航空机轮刹车系统最新的研究方向包括吸收能量更多并且更耐磨损的高密度碳材料,寻求更轻更强的结构部件材料,提升设计方法以优化刹车性能,机轮刹车系统的结构动力学研究,更大范围的电刹车装置和电刹车控制系统研究等。     

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

基于断口分析的钛合金轮内部缺陷损伤容限

为进行某轮损伤容限设计,开展了裂纹扩展断口分析和仿真分析研究。由断口分析可知:疲劳源为一处内部自然缺陷;依据疲劳辉纹确定了裂纹扩展速率;在裂纹长度为2 mm附近,裂纹扩展速率明显增大,为第一、第二加载阶段转换区域;裂纹稳定扩展区裂纹长度与裂纹扩展速率呈双对数线性关系;应用列表梯度法和Paris公式法反推了第二加载阶段的疲劳寿命,与该阶段实际循环次数的最大误差是163%。裂纹稳定扩展阶段裂纹扩展仿真值与断口反推值吻合;非稳定扩展阶段仿真值与断口反推值的最大误差为-215%;基于以上研究,合理确定了某离心轮内部裂纹表面扩展停机检测周期。该类轮非稳定、失稳扩展阶段寿命占内部裂纹表面扩展阶段寿命的比例达248%~357%,因此准确计算具有重要意义。     

电镀砂轮磨损对GH4169磨削表面完整性的影响

电镀砂轮具有优异的成型性和形状保持能力,越来越广泛地应用于复杂曲面的加工,但是磨损对零件表面完整性影响的研究并不充分.在深入分析利用圆环型砂轮在插磨方式下加工GH4169试件所产生的表面形貌形成规律的基础上,对高刚度矩形试件的磨削表面粗糙度随砂轮磨削量的变化进行了详细记录,并对某型号发动机静子叶片进行实际磨削验证.试验结果表明,精磨时适当的砂轮磨损可以使高刚度试件表面粗糙度下降35％,对表面硬度和残余应力影响不大;而叶片的弱刚度会大幅提高磨削粗糙度,但适当的砂轮磨损可以使叶片端部粗糙度下降64％,并降低刚度对粗糙度的影响,进而提高叶片表面磨削质量的一致性.因此,通过磨削粗糙度对砂轮的磨损状况进行大致评估,选择合适磨损量的砂轮用于精加工,以充分降低工件的表面粗糙度并提高磨削质量的一致性.     

Development,integrated investigation,laboratory and in-flight testing of Chibis-M microsatellite ADCS

Design, analytical investigation, laboratory and in-flight testing of the attitude determination and control system (ADCS) of a microsatellites are considered. The system consists of three pairs of reaction wheels, three magnetorquers, a set of Sun sensors, a three-axis magnetometer and a control unit. The ADCS is designed for a small 10–50 kg LEO satellite. System development is accomplished in several steps: satellite dynamics preliminary study using asymptotical and numerical techniques, hardware and software design, laboratory testing of each actuator and sensor and the whole ADCS. Laboratory verification is carried out on the specially designed test-bench.In-flight ADCS exploitation results onboard the Russian microsatellite “Chibis-M” are presented. The satellite was developed, designed and manufactured by the Institute of Space Research of RAS. “Chibis-M” was launched by the “Progress-13M” cargo vehicle on January 25, 2012 after undocking from the International Space Station (ISS). This paper assess both the satellite and the ADCS mock-up dynamics. Analytical, numerical and laboratory study results are in good correspondence with in-flight data.     

一例输液反应患者护理分析及体会

本文通过对一例发生输液反应患者的护理总结 ,分析了发生输液不良反应的原因 ,提出了完善医疗护理工作的相应举措     

基于推阻平衡的喷管型面截短方法研究及试验验证

出于减小喷管壁面摩擦损失的考虑以及发动机的整体布局的受制,传统推力喷管设计方法得到的理想喷管通常需要进行适当截短。合理的截短方法有助于保持喷管性能,因此,通过壁面单元受力分析并考虑单元体内的推力与阻力关系,提出了一种推阻平衡的喷管截短设计方法。使用上述方法对一个三次曲线型面的三维原始完全膨胀喷管进行截短,使喷管长度减小25%,重量减小34%。通过风洞试验与数值模拟结果对比发现,截短后的喷管推力系数提高1.5%,升力也得到有效提高,验证了此种截短方法的正确性。截短后喷管处于欠膨胀状态,与理论分析得到的最大静推力状态结果相符。     

双金属铆钉特点及安装工艺技术

双金属铆钉是一种铆接过程中钉杆不变形的新型铆钉,适用于复合材料等结构的连接。铆钉既具有较高的抗剪性能,又具有良好的铆接性能,还具有重量轻、成本低、装配简单等特点,已经在航空航天等部门获得了应用。结合国内外双金属铆钉的发展状况,简单阐述其性能与结构特点,并简要介绍其安装工艺技术。     

多轮多支柱式飞机起落架运动特性仿真研究

为了评估起降阶段的飞机操控特性,针对某型飞机多轮多支柱式起落架系统,研究组成单个起落架支柱的轮胎、缓冲器、刹车系统、前轮转弯等部件的受力、力矩特性及传递过程。基于线性理论,将多个支柱运动特性叠加,运用Matlab/Simulink软件工具,建立整个系统的仿真模型。嵌入某型飞机六自由度运动解算模型进行飞机落震、加速滑跑、高低速转弯、起飞离地、着陆接地、刹车减速等仿真验证,并在某型飞机动基座模拟器上进行飞行试验。结果表明:该起落架模型各项功能完善,能够正确反映飞机姿态响应过程,飞机起降过程感受与真实飞机基本一致。