基于改进平方根无迹卡尔曼滤波方法的涡扇发动机气路状态监控

针对涡扇发动机气路状态监控存在模型未知或不准确导致滤波效果下降甚至发散的问题,研究了一种融入高斯过程回归（GPR）的改进平方根无迹卡尔曼滤波（UKF）方法.该方法利用GPR对训练数据进行学习,建立发动机气路部件状态监控的GPR模型,替代UKF方法中的非线性系统模型;采用超球体单形采样和平方根滤波方法来提高滤波的计算效率和数值稳定性.仿真结果表明:训练的GPR模型解决了UKF方法对发动机原系统模型和噪声协方差矩阵依赖性的问题;与扩展卡尔曼滤波（EKF）和平方根UKF方法相比较,改进平方根UKF方法精度更高,对健康参数的估计精度达到99.9%,实现了对涡扇发动机单个和多个气路部件健系参数的有效跟踪.      

基于网口轨迹的空间绳网捕获

空间绳网是一种柔性的捕获技术,为更准确地研究绳网捕获空间目标的过程,提出了一种基于网口轨迹的分析方法。采用集中质量法和Hertz接触理论构建了绳网捕获目标的动力学模型。将绳网捕获目标的过程按时间先后顺序分为自由展开、包裹目标以及利用收口装置捕获目标3个阶段进行研究。基于对网口轨迹的分析,提出了绳网成功捕获目标的评价指标,重点对捕获过程中涉及的相关参数进行分析,评估了包括发射速度、捕获距离、收口时间以及偏心距离等在内的捕获参数对绳网捕获目标过程的影响。仿真结果表明,基于网口轨迹的分析方法可以更直观全面地分析绳网捕获目标的过程,并为捕获参数的选择提供参考依据,以提高绳网捕获目标的成功率。     

多操纵面飞机舵面损伤的快速故障诊断

针对多操纵面飞机舵面损伤的快速故障诊断问题,提出一种直接估计舵面偏转量的自适应补偿观测器方法。首先,设计了增广观测器进行系统输入估计,并提出了自适应补偿方法解决其动态跟踪性能差的问题;其次,设计了一种新的自适应阈值以快速检测故障并降低虚警率;最后,利用舵面故障特点,采用重置初值的限定记忆最小二乘方法实现了对突变参数的实时估计,用以进行故障隔离。仿真结果表明:在不同的舵面损伤故障情况下,所提出的观测器方法能在20 ms内发出故障预警,并在0.22 s内确定故障位置,所采用的辨识方法可以在故障报警后的0.2 s内准确估计出损伤程度。     

横截面形状对超声速磁流体发生器性能的影响

通过三维数值模拟研究了不同横截面形状的磁流体(MHD)发生器的热、电磁流动特性,发生器入口采用超声速来流条件,旨在应用于磁流体旁路超燃冲压发动机推进系统。数值模拟采用低磁雷诺数下磁流体五方程模型,通过熵条件格式和超松弛迭代(SOR)法联合算法分别求解Navier-Stokes方程组和电势方程。研究表明在电极壁面上电场、电流以及洛伦兹力等电磁场参数呈周期性变化,由于电极端点效应,电磁场参数在电极端点出现周期性的极值,而在管道中心电极端点效应对电流影响并不大,沿着流向电流保持连续变化。对不同管道横截面形状的发生器的数值模拟表明:由于涡电流和二次流效应的影响,形状参数较小的发生器焦耳热较为严重,二次流较弱;而形状参数较大的发生器焦耳热较小,二次流增强。因此,当形状参数α=0.8时可获得较好的焓提取率和电效率。     

Precursory signature of several major earthquakes studied using 40 kHz low frequency signal

To investigate the precursory signature of earthquakes on low frequency (LF) signal propagation, six earthquakes, having magnitude greater than equal to 6.5 and depth less than equal to 30 km, are being studied. The base line level of 40 kHz signal, transmitted from JJY station, Japan, is analysed with respect to V_d statistical parameter. Results show that the V_d parameter values starts fluctuating from its ambient levels before and during the days of the earthquakes, with significant variation starting 1–3 days prior to the earthquake concerned. This present study is an approach for identifying the precursory signatures of earthquakes on LF signal propagation using a new methodology with V_d parameter.     

Coordinated control of tethered space robot using mobile tether attachment point in approaching phase

Tethered space robots (TSRs) have wide applications in future on-orbit service owing to its flexibility and great workspace. However, the control problem is quite complex and difficult in the phase of approaching target, and the fuel consumption must also be taken into account. Hence, we present a novel scheme of achieving coordinated orbit and attitude control simultaneously for the TSR. Space tether, which can provide greater force compared with the thruster force, is used in the design of the orbit and attitude coordinated controller. A coordinated control mechanism is designed to provide attitude control torques of the pitch and yaw motions by adjusting the position of the mobile tether attachment point, while the roll motion is stabilized by the thruster. In order to guarantee this mechanism to work properly, constant tether tension strategies are utilized to plan an optimal approaching trajectory which is tracked by the coordinated controller of tether force and thruster force. Numerical simulation validates the feasibility of our proposed coordinated control scheme for TSR in the approaching phase. Furthermore, fuel consumption of the orbit and attitude control are both significantly reduced compared with traditional thruster control.     

Impact of orbit modeling on DORIS station position and Earth rotation estimates

The high precision of estimated station coordinates and Earth rotation parameters (ERP) obtained from satellite geodetic techniques is based on the precise determination of the satellite orbit. This paper focuses on the analysis of the impact of different orbit parameterizations on the accuracy of station coordinates and the ERPs derived from DORIS observations. In a series of experiments the DORIS data from the complete year 2011 were processed with different orbit model settings. First, the impact of precise modeling of the non-conservative forces on geodetic parameters was compared with results obtained with an empirical-stochastic modeling approach. Second, the temporal spacing of drag scaling parameters was tested. Third, the impact of estimating once-per-revolution harmonic accelerations in cross-track direction was analyzed. And fourth, two different approaches for solar radiation pressure (SRP) handling were compared, namely adjusting SRP scaling parameter or fixing it on pre-defined values.     

低噪声封装器件噪声参数不确定度评定

本文开展了基于Maury公司的Tuner和Agilent公司PNA-X矢量网络分析仪组建的超快噪声参数测量系统的不确定度评定研究工作,通过分析测量系统的输入、输出数据,独立开发了不确定度评定的测量模型,设计了满足国际标准ISO/IEC98-3要求的不确定度评定方法,编制了不确定度仿真软件,首次报道了四个噪声参数的不确定度数据,最佳估计值和95%概率下得包含区间。     

星间激光输能姿态指向自适应控制器设计

针对同轨道平面两星之间激光能量传输时的姿态指向控制问题,基于反步（Backstepping）法提出了一种自适应控制器设计方法。该方法先基于罗德里格参数（MRP）对卫星进行姿态描述;然后根据星间激光输能任务对姿态指向的特殊要求通过多个姿态矩阵的转换解算出了用户星期望姿态的表达式;之后基于Backstepping法,设计了自适应控制律,该控制律能解决控制输入有限和转动惯量不确定的问题,而且有效克服空间干扰力矩;最后通过Lyapunov稳定性定理证明了控制系统的稳定性。仿真结果显示,在约15s后,用户星的姿态误差和角速度误差收敛到0,并且角速度和控制力矩的值都在约束条件的范围内,说明文章设计的控制器不仅能够使用户星按最短路径调整到期望姿态,而且能够有效地抑制空间干扰力矩和解决转动惯量不确定的问题,并且通过合理地设计控制参数,可以在保证控制精度和速度情况下使控制输入满足约束条件。     

数字仪器标准装置期间核查的实施

介绍了对数字仪器标准装置实施期间核查的时机、核查方案的策划、核查的频次、核查的方法、核查的记录方式和核查结果的处理。运用同量级比对的核查方法,通过对数字仪器标准装置的直流电压、交流电压、交流电流三个参数期间核查过程数据的分析,建立控制图,取得了对测量标准实施期间核查的成果。