中心承力筒数控加工工艺

通过制定合理的数控加工工艺方案,实现了中心承力筒的数控加工,有效保证了孔的加工精度和

表面质量,提高了零件的加工效率。通过在5 轴联动数控加工中心上实际加工,证明该数控加工工艺切实可

行。

     

一种用于液晶曝光中的激光检测系统

介绍了一种非接触式激光检测系统，可用于检测液晶曝光中液晶模板与基板之间的间隙，给出了该种系统的测量原理、硬件系统、信号处理方法、测量结果、分辨力和误差分析，并指出了这种测量系统的应用。     

Integration and calibration of a multi slit spectropolarimeter

Multi-slit spectropolarimeter is a next-generation spectropolarimeter to obtain vector magnetic field information at high spatial, spectral, and temporal resolution for studying the magnetic structures on the Sun. Once developed, it can be used as ground based instrument at solar observatories, also as a space payload for various solar missions. A high spectral resolution is invariably an important parameter for accurate vector magnetic field measurements and faster cadence is required for the study of dynamical evolution of structures (e.g., solar flares, sunspots etc.) on the Sun and hence better understanding on the physics behind their evolution.     

Coupled Lagrangian impingement spray model for doublet impinging injectors under liquid rocket engine operating conditions

To predict the effect of the liquid rocket engine combustion chamber conditions on the impingement spray, the conventional uncoupled spray model for impinging injectors is extended by considering the coupling of the jet impingement process and the ambient gas field. The new coupled model consists of the plain-orifice sub-model, the jet-jet impingement sub-model and the droplet collision sub-model. The parameters of the child droplet are determined with the jet-jet impingement sub-model using correlations about the liquid jet parameters and the chamber conditions.The overall model is benchmarked under various impingement angles, jet momentum and offcenter ratios. Agreement with the published experimental data validates the ability of the model to predict the key spray characteristics, such as the mass flux and mixture ratio distributions in quiescent air. Besides, impinging sprays under changing ambient pressure and non-uniform gas flow are investigated to explore the effect of liquid rocket engine chamber conditions. First, a transient impingement spray during engine start-up phase is simulated with prescribed pressure profile. The minimum average droplet diameter is achieved when the orifices work in cavitation state, and is about 30% smaller than the steady single phase state. Second, the effect of non-uniform gas flow produces off-center impingement and the rotated spray fan by 38°. The proposed model suggests more reasonable impingement spray characteristics than the uncoupled one and can be used as the first step in the complex simulation of coupling impingement spray and combustion in liquid rocket engines.     

飞机机头附近液态水含量分布规律的数值研究

在飞行器飞行过程中,安装在机头上的各类传感器结冰会对飞机的飞行安全产生不利影响。而液态水含量是影响飞机结冰的重要参数,为了更好地进行传感器结构及布局设计,对机头附近液态水含量分布规律进行数值研究。采用计算流体力学方法对飞机飞行时的空气-过冷水滴的稀疏两相流场进行数值模拟,通过求解N-S方程获得空气流场,采用欧拉法求解水滴运动场得到水滴运动轨迹。分析在不同来流马赫数、来流迎角及液滴直径等条件下,机头关键截面上广义水滴遮蔽高度的变化及机头关键位置上液态水含量的变化规律,研究不同状态参数对液态水含量分布的影响。结果表明:水滴遮蔽高度及浓度增加区范围随马赫数增大而增加,迎角的变化对机头上下表面液态水含量分布产生相反的影响。     

液膜法处理石化厂碱渣含酚废水的研究

本文研究了液膜法处理石化厂碱渣含酚废水的最佳制乳条件，最佳传质条件，并应用于不同浓度含酚水样处理。当挥发酚浓度低于７０００ＰＰｍ时，顷一级传质可使含酚量低于１００ＰＰｍ，７０００￣２００００ＰＰｍ，级二级传质可使含酚量低于１００ＰＰｍ，处理后废水可直接排放到石化厂和生化厂处理，为进一步进行中试研究提供了理论依据。     

火箭发动机基于神经网络非线性辨识的故障检测

应用神经网络方法，提出了一种液体火箭发动机故障实时检测算法。神经网络采用非线性辨识技术贴近发动机的工作过程，并输出包合发动机故障信息的辨识误差信号。若辨识误差变大超过一定阈值，检测逻辑就预报发动机故障。在发动机启动阶段离线训练神经网络，在发动机稳态过程可以采用离线或在线学习算法。实验研究表明神经网络可以成功地应用于大型泵压式液体火箭发动机的故障检测。     

一种液体火箭发动机试验台螺纹拧紧力矩量化控制方法

针对液体火箭发动机试验台工艺装配可靠性提升的需求,提出一种螺纹拧紧力矩量化控制方法。利用非试验和试验环境的力矩值统计与分析,确定液体火箭发动机试验台螺纹拧紧力矩值区间;通过拧紧力矩强度理论计算,验证力矩值区间的合理性;结合试验台螺纹空间位置的具体特点,确定适用不同空间位置的力矩量化控制方法和流程,并在试验中进行了应用。应用结果表明,本文提出的方法可有效提高发动机试验工艺的可靠性。     

A novel framework for liquid propellant engine’s cooling system design by sensitivity analysis based on RSM and multi-objective optimization using PSO

One of the challenges of combustion chamber and nozzle design in a Liquid Propellant Engine (LPE) is to predict the behavior and performance of the cooling system. Therefore, while designing, the optimization of the cooling system is always of great importance. This paper presents the multi-objective optimization of the LPE’s cooling system. To this end, a novel framework has been developed, resulting from the application of the Response Surface Method (RSM) and the correlation coefficients matrix, sensitivity analysis and the The Particle Swarm Optimization (PSO). based on this method, the input variables, constraints, objective functions, and their surfaces were identified. In terms of multi-optimization algorithms, RSM and PSO are utilized to get global optimum. In conclusion, the methodology capability is to optimize the LPE’s cooling system, 6 percentage increase in total heat transfer and 7 bar decrease cooling system pressure loss, which resulted in a 1.2-seconds increase in the specific impulse of the engine.