基于UKF的双机协同纯角度目标定位路径规划

针对三维空间双机协同定位问题,在无迹卡尔曼滤波的基础上,提出一种规划双机路径的方法。首先,利用双机探测得到的方位角和俯仰角信息,并结合无迹卡尔曼滤波算法估计目标的状态;在此基础上根据交互信息理论提出指标函数的概念,以指标函数最大为轨迹优化的最优性能指标,将问题转化为求双机控制量的最优解;最后,采用遗传算法求解双机的控制量,得到比较合理的双机飞行路径。仿真结果表明,通过最大化指标函数可以有效地规划双机路径,且具有更高的精度和速度。     

NONLINEAR FILTERING ALGORITHM FOR INS INITIAL ALIGNMENT

The initial alignment error equation of an INS (Inertial Navigation System) with large initial azimuth error has been derived and nonlinear characteristics are included. When azimuth error is fairly small, the nonlinear equation can be reduced to a linear one. Extended Kalman filter, iterated filter and second order filter formulas are derived for the nonlinear state equation with linear measurement equation. Simulations results show that the accuracy of azimuth error estimation using extended Kalman filter is better than that of using standard Kalman filter while the iterated filter and second order filter can give even better estimation accuracy.     

Development,integrated investigation,laboratory and in-flight testing of Chibis-M microsatellite ADCS

Design, analytical investigation, laboratory and in-flight testing of the attitude determination and control system (ADCS) of a microsatellites are considered. The system consists of three pairs of reaction wheels, three magnetorquers, a set of Sun sensors, a three-axis magnetometer and a control unit. The ADCS is designed for a small 10–50 kg LEO satellite. System development is accomplished in several steps: satellite dynamics preliminary study using asymptotical and numerical techniques, hardware and software design, laboratory testing of each actuator and sensor and the whole ADCS. Laboratory verification is carried out on the specially designed test-bench.In-flight ADCS exploitation results onboard the Russian microsatellite “Chibis-M” are presented. The satellite was developed, designed and manufactured by the Institute of Space Research of RAS. “Chibis-M” was launched by the “Progress-13M” cargo vehicle on January 25, 2012 after undocking from the International Space Station (ISS). This paper assess both the satellite and the ADCS mock-up dynamics. Analytical, numerical and laboratory study results are in good correspondence with in-flight data.     

A residual based adaptive unscented Kalman filter for fault recovery in attitude determination system of microsatellites

This paper presents an adaptive unscented Kalman filter (AUKF) to recover the satellite attitude in a fault detection and diagnosis (FDD) subsystem of microsatellites. The FDD subsystem includes a filter and an estimator with residual generators, hypothesis tests for fault detections and a reference logic table for fault isolations and fault recovery. The recovery process is based on the monitoring of mean and variance values of each attitude sensor behaviors from residual vectors. In the case of normal work, the residual vectors should be in the form of Gaussian white noise with zero mean and fixed variance. When the hypothesis tests for the residual vectors detect something unusual by comparing the mean and variance values with dynamic thresholds, the AUKF with real-time updated measurement noise covariance matrix will be used to recover the sensor faults. The scheme developed in this paper resolves the problem of the heavy and complex calculations during residual generations and therefore the delay in the isolation process is reduced. The numerical simulations for TSUBAME, a demonstration microsatellite of Tokyo Institute of Technology, are conducted and analyzed to demonstrate the working of the AUKF and FDD subsystem.     

基于剪裁技术考虑的某冲击试验分析

利用环境工程剪裁技术对某冲击试验的结果进行分析,结果表明,按照引用标准评定为"超差"的试验,当考虑到试验件结构的特性并进行必要的数据转换后,试验结果是有效。首先分析造成超差的原因为天线组件的剩余响应,然后通过频域数字滤波进行数据转换。     

基于纵向滤波的星敏感器低频误差在线估计

多敏感器数据融合是获得更高精度姿态测量的有效方法，敏感器数据融合前必须先修正低频误差。首先，介绍了星敏感器低频误差（LFE）的产生机理及对其在线估计的必要性。其次，针对传统算法的不足，提出了基于纵向滤波的低频误差在线估计算法，该算法将传统低频误差估计问题转化为若干个常值误差估计问题，提高了估计精度。最后，给出了该算法具体实施方式，说明相关参数物理意义及选取原则。通过理论分析及仿真，算法误差可忽略不计。通过在轨数据仿真，星敏感器轨道周期低频误差可被消除。     

运动单站干涉仪相位差直接定位方法

针对传统干涉仪测向定位在低信噪比(SNR)下性能降低、多频段系统复杂等缺点,本文直接利用运动单站干涉仪模糊相位差(PD)实现对地面静止辐射源定位.为解决该定位问题,结合干涉仪相位差的几何特性,提出了一种多角度距离参数化高斯和滤波(MB-RP-GMF)定位解算方法,利用相位差误差检测获得多个初始方位角,通过距离参数化得到一组滤波初始值,采用扩展卡尔曼滤波(EKF)进行定位计算.仿真结果表明,该定位方法在低信噪比下优于仅测向(BO)定位,且仅采用一组干涉仪便可对多个频段辐射源进行定位.     

企业网络：类型比较及发展研究

分析了作为中间组织类型的企业网络所具有的组织结构和组织特征，并对其进行了三个层次的划分：集群层次、集团层次和联盟层次，比较分析了处于各个不同层次上的企业网络之间的差异性。认为，技术平台和合作平台将成为企业网络今后发展和进化的关键，并探讨了其相应的两个方面：虚拟创新和信任。     

pq阶亚循环群局部传递的图

所指的图是有限的、单的、无向的且无孤立点。如果图的自同构群分别在图的边集合和点集合上传递．分别称图是边传递的和点传递的。设G≤Aut（F），如果对于每个α∈V（Г），Gα在Г（α）上传递，则称Г是G-局部传递图。主要利用边传递、点传递和局部传递的关系及陪集图的理论，获得了关于pq（p、q是素数，p〉q）阶亚循环群局部传递的图的完全分类。获得的结果为：关于pq阶群局部传递的图或为弧传递图，或为二分的边传递图，或为一些边传递图的并。     

Reliable flight performance assessment of multirotor based on interacting multiple model particle filter and health degree

Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performance anomalies during the flight process. These failures and anomalies may result in mission interruptions, crashes, and even threats to the lives and property of human beings. Thus, the study of flight reliability problems of multirotors is conductive to the development of the drone industry and has theoretical significance and engineering value. This paper proposes a reliable flight performance assessment method of multirotors based on an Interacting Multiple Model Particle Filter (IMMPF) algorithm and health degree as the performance indicator. First, the multirotor is modeled by the Stochastic Hybrid System (SHS) model, and the problem of reliable flight performance assessment is formulated. In order to solve the problem, the IMMPF algorithm is presented to estimate the real-time probability distribution of hybrid state of the established SHS-based multirotor model, since it can decrease estimation errors compared with the standard interacting multiple model algorithm based on extended Kalman filter. Then, the reliable flight performance is assessed with health degree based on the estimation result. Finally, a case study of a multirotor suffering from sensor anomalies is presented to validate the effectiveness of the proposed method.