多站混合定位系统的平面误差分析

基于应答方式的多站机场航管定位系统可同时采用时差和距离测量技术,应用最小二乘法和误差估计理论,对按圆周均等布站的四站、五站和六站定位系统所做的相对测量误差分析表明,利用二次监视雷达所给出的测距信息,并通过有限增加冗余测站,将能有效的提高多站定位系统的平面定位精度。     

Flight performance analysis of GRACE K-band ranging instrument with simulation data

A dual one-way ranging (DOWR) system provides very high accuracy range measurements between two satellites. The GRACE satellite mission implements the DOWR, called KBR (K-band ranging), to measure very small inter-satellite range change in order to map the Earth gravity field. The flight performance of the KBR is analyzed by using a hybrid software simulator that incorporates actual satellite orbit data into a comprehensive KBR simulator, which was earlier used for computing the GRACE baseline accuracy. Three types of experiments were performed. First is the comparison of the flight data with the simulated data in spectral domain. Second is the comparison of double differenced noise level. Third is the comparison of the range-rate difference with GPS clock estimates. The analysis shows a good agreement with the simulation model except some excessive high frequency noise, e.g. 10⁻⁴ m/√Hz at 0.1 Hz. The range-rate difference shows 0.003 cyc/s discrepancy with the clock estimates. These analyses are helpful to refine the DOWR simulation model and can be benefit to future DOWR instrument development.     

改善三元子阵测距精度方法研究

在水声领域,三元子阵测距、目标运动分析(TMA)和匹配场处理(MFP)是被动噪声测距的3种主要技术。文中以三元子阵测距声呐为研究对象,从波束形成、相关系数处理、测向精度改进等方面讨论提高时延估计精度的方法,对工程应用具有一定的参考价值。     

Achievable debris orbit prediction accuracy using laser ranging data from a single station

Earlier studies have shown that an orbit prediction accuracy of 20 arc sec ground station pointing error for 1–2 day predictions was achievable for low Earth orbit (LEO) debris using two passes of debris laser ranging (DLR) data from a single station, separated by about 24 h. The accuracy was determined by comparing the predicted orbits with subsequent tracking data from the same station. This accuracy statement might be over-optimistic for other parts of orbit far away from the station. This paper presents the achievable orbit prediction accuracy using satellite laser ranging (SLR) data of Starlette and Larets under a similar data scenario as that of DLR. The SLR data is corrupted with random errors of 1 m standard deviation so that its accuracy is similar to that of DLR data. The accurate ILRS Consolidated Prediction Format orbits are used as reference to compute the orbit prediction errors. The study demonstrates that accuracy of 20 arc sec for 1–2 day predictions is achievable.     

Time-varying solar radiation pressure on Ajisai in comparison with LAGEOS satellites

This study aims to investigate solar radiation pressure acting on the spherical geodetic satellites, Ajisai, LAGEOS-1, and LAGEOS-2. The solar radiation pressure coefficients ($C_R$) are derived in two independent ways: (a) through precise orbit determination (POD) using satellite laser ranging (SLR) data, and (b) through modeling using the optical properties of the satellite surface material. The average $C_R$ value of Ajisai (1.039), as calculated from the time series of $C_R$ POD estimates every 15?days, is consistently smaller than those of LAGEOS-1 (1.140) and LAGEOS-2 (1.103). This difference can be explained by the fact that the surface of Ajisai is mostly covered by mirrors. The Ajisai $C_R$ values estimated by POD show remarkable semi-annual variation, which disagrees with the results of a previous study (Sengoku et al., 1995) predicting that the $C_R$ of Ajisai varies almost annually. We attribute this semi-annual variation to two physical reasons: the non-spherical additional cross-sectional area due to the “attached fitting ring” and the low reflectivity of the surface material in the polar regions. Furthermore, the solar radiation pressure acting on Ajisai varies annually in a direction perpendicular to the sun-satellite vector. Finally, the two independent $C_R$ values of Ajisai agree more when we assume a total solar irradiance of 1361?W/m², whereas the value 1367?W/m² has been commonly used in POD.     

基于射频的导航卫星星间链路信息传输与仿真研究

星间链路是导航卫星实现精密定轨和自主导航的关键技术之一。导航卫星通过星间链路完成伪距测量和数据交换,维持系统稳定运行的时空基准,保证系统持续提供精准导航服务。根据全球导航卫星系统的建设情况和发展趋势,首先介绍星间观测和信息传输频段,并从天线特征、多址控制方式和网络拓扑结构等角度分析了射频链路的工作体制。最后,针对实际导航卫星星座,应用OPNET平台建立导航信息传输仿真模型,通过分析信息传输效率,验证了基于射频链路导航信息传输的可行性和有效性,对全球导航卫星系统的星间链路研究具有一定的参考价值。     

NASA历表在深空导航中的发展和比较

利用不同版本的数值历表,对我国正在进行的探月工程以及后续的金星、火星和木星等深空探测中的导航问题进行分析和讨论。对DE405、DE421和DE430的动力学模型及其使用的观测数据进行了分析比较,考察了历表的精度和稳定性。并根据DE430历表简单讨论了木星在我国深空探测站的可视问题,为以后深空导航提供参考。简单讨论了中科院国家天文台行星无线电研究团组基于月球无线电测距(LRR)发展我国自己的历表以及开展基于月球深空导航计划的可行性。     

星间链路测量中的载波相位测距算法研究

运用双频伪码/载波相位组合方式求解整周模糊度的方法实现星间链路中的载波相位测距。在双频伪码/载波相位组合原理的基础上,对不同组合方式下的测量误差进行分析,并研究了增大载波频率时的载波相位测距手段。仿真结果表明,算法能得到较准确的整周模糊度值和精度较高的测距值,实现了载波相位高精度测距。     

Improved kHz-SLR tracking techniques and orbit quality analysis for LEO missions

Satellite gravity field missions such as CHAMP, GRACE and GOCE are designed as low Earth orbiting spacecraft (LEO) with orbit heights of about 250–500 km. The challenging mission objectives require a very precise knowledge of the satellite orbit position in space. For these missions precise orbit information is typically provided by GPS satellite-to-satellite tracking (SST) observations supported by satellite laser ranging (SLR).     

星际着陆自主障碍检测与规避技术

 为了在具有科学价值的复杂地形区域实现安全着陆,未来的星际着陆器必须具备自主障碍检测与规避的能力。从星际着陆导航传感器技术、自主障碍检测方法和自主障碍规避技术3个方面出发,对星际着陆自主障碍检测与规避技术进行较全面的分析和总结。首先,对适用于星际着陆自主障碍检测的各种主动式和被动式传感器的工作原理、优缺点进行较深入的阐述;接着,基于不同传感器的测量信息,对各种自主障碍检测方法的障碍检测能力、优缺点进行较详细的对比分析;然后,基于多信息融合的自主障碍检测方法,对安全着陆点选择的原则进行阐述;最后,对星际着陆自主障碍规避流程和适用于星际着陆自主障碍规避的制导控制方法进行较系统的总结。