鼠笼式弹性支承结构参数分步优化设计方法

为进一步提高鼠笼式弹性支承结构支承刚度设计的准确性,同时最大限度地减小鼠笼受到的最大应力,在相关研究的基础上,基于参数化建模思想,并结合有限元优化技术提出分步优化设计方法.采用鼠笼式弹性支承的刚度和应力计算公式并结合加工装配条件初定1组满足设计要求的结构参数值;建立鼠笼式弹性支承的有限元优化模型,并将初定的结构参数值代入到有限元优化模型作为优化的初始迭代值,同时以鼠笼笼条的长度和厚度为优化参数,经过迭代计算得到满足工程需求的结构参数.该方法可提高设计精度,节省设计时间.最后,结合具体算例验证了优化设计方法的有效性和实用性.     

测试三轴转台误差分析及建模

以用于测斜仪的三轴转台为研究背景,通过分析其运动规律,探讨了三轴转台不正交度误差源对三轴转台精度的影响,并用MATLAB对它进行了误差建模,仿真计算得出了系统装配不正交时三个坐标的误差率;最后,引入实际测试过程中角度传感器的测量误差,在三轴不正交的前提下又对三坐标测量误差进行了数学建模,通过仿真分析,研究探讨了角度传感器带来的误差规律,在实际应用中为测斜仪标定测试和误差补偿提供了理论依据.     

飞机方向舵故障建模与侧风着陆仿真

基于风洞试验数据和CFD数据,建立了某型飞机上、下两片方向舵在松浮、卡滞和脱落等故障的数学模型;针对方向舵脱落故障,在飞行模拟器上进行了人在环的侧风着陆仿真试验,验证了模型的准确性,得到了与实际侧风响应相吻合的故障模型;最后,基于此模型探讨了方向舵故障下的侧风着陆安全性与驾驶员负荷.     

带气膜阻尼结构振动特性的理论研究

针对航空发动机气膜阻尼的结构设计需求,基于挤压间隙流理论和能量方程建立气膜阻尼的力学模型,由此获得气膜阻尼结构的等效刚度系数和等效阻尼系数,通过振动方程的理论推导获得放大因子的表达式.结果表明:气腔厚度、气腔初始压强、吸振薄板模态频率和安装位置是影响减振效果的关键参数.气腔最优厚度主要由附面层厚度和实际振动频率决定,需结合实际情况确定气腔厚度,以最大程度降低振动响应;气腔初始压强越高,阻尼系数越大;吸振薄板的固有频率应尽可能与叶片本体接近,并且安装在本体振动响应最大位置,以取得最好的减振效果.      

Nonlinear dynamic modeling of a helicopter planetary gear train for carrier plate crack fault diagnosis

Planetary gear train plays a significant role in a helicopter operation and its health is of great importance for the flight safety of the helicopter. This paper investigates the effects of a planet carrier plate crack on the dynamic characteristics of a planetary gear train, and thus finds an effec-tive method to diagnose crack fault. A dynamic model is developed to analyze the torsional vibra-tion of a planetary gear train with a cracked planet carrier plate. The model takes into consideration nonlinear factors such as the time-varying meshing stiffness, gear backlash and viscous damping. Investigation of the deformation of the cracked carrier plate under static stress is performed in order to simulate the dynamic effects of the planet carrier crack on the angular displacement of car-rier posts. Validation shows good accuracy of the developed dynamic model in predicting dynamic characteristics of a planetary gear train. Fault features extracted from predictions of the model reveal the correspondence between vibration characteristic and the conditions (length and position) of a planet carrier crack clearly.     

Advances and trends in plastic forming technologies for welded tubes

With the implementation of environmental protection, sustainable development and conservation-oriented policies, components and parts of thin-walled welded tubes have gained increasing application in the aircraft and automotive industries because of their advantages: easily achieving forming and manufacturing process at low cost and in a short time. The current research on welded tube plastic forming is mainly concentrated on tube internal high-pressure forming, tube bending forming, and tube spinning forming. The focuses are on the material properties and characterization of welded tubes, finite element modeling for welded tube forming, and inhomogeneous deformation behavior and the mechanism and rules of deformation coordination in welded tube plastic forming. This paper summarizes the research progress in welded tube plastic forming from these aspects. Finally, with a focus on the urgent demand of the aviation, aerospace and automotive industries for high-strength and light-weight tubes, this paper discusses the development trends and challenges in the theory and technology of welded tube plastic forming in the future. Among them,laser tailor-welded technology will find application in the manufacture of high-strength steel tubes.Tube-end forming technology, such as tube flaring and flanging technology, will expand its application in welded tubes. Therefore, future studies will focus on the FE modeling regarding how to consider effects of welding on residual stresses, welding distortions and microstructure, the inhomogeneous deformation and coordination mechanism of the plastic forming process of tailor-welded tubes, and some end-forming processes of welded tubes, and more comprehensive research on the forming mechanism and limit of welded tubes.     

基于中弧线曲率控制的压气机叶型优化

为提高压气机叶型优化设计水平,基于中弧线曲率控制方法编写了压气机叶片造型程序,将中弧线曲率控制参数作为优化变量,结合粒子群寻优算法对传统可控扩散叶型(CDA)进行了优化研究。结果表明:基于中弧线曲率控制的叶片造型程序能够对CDA叶型进行较好的拟合,拟合叶型的气动性能与设计要求较符。优化叶型在设计点的总压损失降低了约6.34%,优化叶型总压损失随攻角变化较为平缓。在一定攻角范围内,叶型中弧线曲率峰值的前移能够将吸力面马赫数峰值前移,提高叶型吸力面的扩压能力,降低总压损失。在大攻角工况下,改进的中弧线曲率分布能够显著降低叶型总压损失。将中弧线曲率控制参数作为优化变量进行CDA叶型的优化是可行的。     

金属弹簧管性能影响因素的仿真分析

为了研究高温密封组件金属弹簧性能,本文通过对波音公司编网状弹簧管结构和Streck心脏支架结构的研究,建立了编织弹簧的几何拓扑构型和数学模型,推导了弹簧直径计算公式。采用AUTODESK3D-MAX构建了编织弹簧的仿真模型,用ANSYS仿真软件分别从编织丝直径、编织密度以及编织方法 3方面探究不同测试对弹簧性能的影响。结果表明,增加弹簧丝直径、降低弹簧管轴向方向的编织密度、提高圆周方向的编织密度、向外的弹簧管编织方式可有效提高弹簧管的回弹性能。     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

舰载直升机理论风限图飞行模拟获取方法

获取舰载直升机实用风限图,仅依靠实装飞行试验或建模仿真都是非常困难的。通过起降飞行模拟试验获取理论风限图,结合少量的海上实装飞行验证试验是一种综合较优的方法。起降飞行模拟试验需要真实飞行员和高等级飞行模拟器参与,飞行模拟器中的母舰气流场数据、母舰运动可由建模仿真或试验测试得到,且必须考虑母舰气流场的非定场特性;只有当飞行员视景或视觉反馈受限时(如能见度降低时),飞行模拟器基座的六自由度运动才是必需的;用DIPES或Bedford方法量化飞行员主观操纵负担,结合记录的客观操纵数据,评判起降难度;典型的飞行模拟试验程序包含了不同风况下的进近和甲板着舰,通常每隔15°和5kn一个风况。通过起降飞行模拟试验得到的理论风限图,可以更加有效和安全地指导海上实装飞行验证试验,最终获得实用风限图。