基于序列近似优化算法的固体运载火箭弹道设计

采用打靶法研究固体运载火箭弹道优化设计问题。针对打靶法中智能优化算法效率、优化问题中约束条件提法等方面的不足,引入序列近似优化算法,提出算法中径向基函数高斯核宽度的高效确定方法。数值仿真实验表明,提出的方法可在基本不带来计算量增加的前提下,显著提高代理模型精度,使序列近似优化算法得到改进,提高优化效率。设计固体运载火箭飞行程序。建立弹道优化设计问题数学模型,并将模型中相关等式约束合理转化为不等式约束,降低优化问题求解难度;基于改进后的序列近似优化算法完成某固体运载火箭弹道优化,原始计算模型调用308次之后便搜索到最优解,较传统智能优化算法显著提高了优化效率,优化方案末助推级液体推进剂消耗比原方案减少25.7%。     

适于直升机配平计算的混合遗传算法

结合传统的数值计算如拟牛顿法的局部快速收敛特性,以及遗传算法的全局收敛与群体搜索的优点,发展出一种新的混合遗传算法,使之具备全局快速收敛特性。通过两个算例及某型直升机在前进比为0.2状态下的配平,验证了该算法的可行性及高效性,从而为直升机的配平计算提供了一种新的成功的算法,同时也在传统数值分析方法和现代智能进化算法之间的有效结合做了一次比较成功的尝试。     

基于双摄像机的立体视觉图像预处理研究

针对立体图像对的亮度差异问题和图像噪声问题研究图像的强化处理,图像预处理主要完成图像对极线校正和图像质量增强.极线校正部分以对极几何为基础研究立体图像对的校正算法.图像质量增强部分主要研究了立体图像对特有的亮度差异问题,并提出了应用直方图均衡化来校正亮度的方法.之后本文对图像噪声进行了深入的分析,并针对立体图像特点使用均值滤波和Gauss滤波平滑图像.在实验中,验证了算法的可行性,取得了良好的应用效果.     

网格拓扑对DLR-F6构型数值模拟的影响

基于TRIP3.0软件平台和多块结构网格技术,开展了控制方程和网格拓扑等因素对DLR-F6构型数值模拟的影响研究。数值计算采用与试验相同的参数,采用了RANS/TLNS方程,生成了O型和H型2种拓扑的粗、中、细网格进行模拟。分别从气动特性、压力系数分布曲线和表面流态3个方面对结果进行分析。通过与试验数据的对比表明,在模拟小分离流动时,采用H型拓扑网格和RANS方程模型,获得的计算结果会更为准确。     

二维抛物化稳定性方程计算

针对二维抛物化稳定性方程(PSE)在法向上采用正交函数展开法进行了计算.在求解PSE的初始条件以及L0的中性曲线中应用了Chebyshev多项式展开.计算结果表明可以获得非常精确的解,证实了在PSE中应用Chebyshev多项式的有效性.     

非线性边界条件的Burgers－KdV方程的静态解

对几类非线性边值条件，讨论了Ｂｕｒｇｅｒｓ－ＫｄＶ方程的边值问题的静态解的存在性和解的个数．借助不动点定理，证明了该边值问题至少有一个，至多有有限个静态解．     

The use of Gaussian equations of motions of a satellite for local gravity anomaly recovery

The orbital elements of a low Earth orbiting satellite and their velocities can be used for local determination of gravity anomaly. The important issue is to find direct relations among the anomalies and these parameters. Here, a primary theoretical study is presented for this purpose. The Gaussian equations of motion of a satellite are used to develop integral formulas for recovering the gravity anomalies. The behaviour of kernels of the integrals are investigated for a two-month simulated orbit similar to that of the Gravity field and steady-state ocean circulation explorer (GOCE) mission over Fennoscandia. Numerical investigations show that the integral formulas have neither isotropic nor well-behaved kernels. In such a case, gravity anomaly recovery is not successful due to large spatial truncation error of the integral formulas. Reformulation of the problem by combining the orbital elements and their velocities leads to an integral with a well-behaved kernel which is suitable for our purpose. Also based on these combinations some general relations among the orbital elements and their velocities are obtained which can be used for validation of orbital parameters and their velocities.     

刀口法测量高斯光束腰斑大小实验设计

本文设计了利用刀口测量的高斯光束腰斑大小的测量实验装置，并阐述了具体的测量过程。此方法用于μｍ级激光光斑大小测量是可行的，实验装置简单实用。     

Friction moment analysis of space gyroscope bearing with ribbon cage under ultra-low oscillatory motion

This paper presents the model of calculating the total friction moment of space gyroscope ball bearings which usually work under ultra-low oscillatory motion and are very sensitive to the friction moment. The aim is to know the proportion of the friction moment caused by each frictional source in the bearing＇s total friction moment, which is helpful to optimize the bearing design to deduce the friction moment. In the model, the cage dynamic equations considering six degree-of-freedom and the balls dynamic equations considering two degree-of-freedom were solved.The good trends with different loads between the measured friction moments and computational results prove that the model under constant rate was validated. The computational results show that when the speed was set at 5 r/min, the bearing＇s maximum total friction moment when oscillation occurred was obviously larger than that occurred at a constant rate. At the onset of each oscillatory motion, the proportion of the friction moment caused by cage in the bearing＇s total friction moment was very high, and it increased with the increasing speed. The analyses of different cage thicknesses and different clearances between cage pocket and ball show that smaller thickness and clearance were preferred.     

Adaptive Gaussian sum squared-root cubature Kalman filter with split-merge scheme for state estimation

The paper deals with state estimation problem of nonlinear non-Gaussian discrete dynamic systems for improvement of accuracy and consistency. An efficient new algorithm called the adaptive Gaussian-sum square-root cubature Kalman filter（AGSSCKF） with a split-merge scheme is proposed. It is developed based on the squared-root extension of newly introduced cubature Kalman filter（SCKF） and is built within a Gaussian-sum framework. Based on the condition that the probability density functions of process noises and initial state are denoted by a Gaussian sum using optimization method, a bank of SCKF are used as the sub-filters to estimate state of system with the corresponding weights respectively, which is adaptively updated. The new algorithm consists of an adaptive splitting and merging procedure according to a proposed split-decision model based on the nonlinearity degree of measurement. The results of two simulation scenarios（one-dimensional state estimation and bearings-only tracking） show that the proposed filter demonstrates comparable performance to the particle filter with significantly reduced computational cost.