面向新世纪的粒子图像测速

一种综述粒子图像测速(Particle Image Velocimetry)的非接触、瞬时、动态、全流场的和本质上是直接的速度场测量技术,成为当今最实用和非常有潜力的流体力学全流场观测(Full Flow Field Observation & Measurement)技术.回顾和展望PIV(包括DPIV,SPIV,HPIV等)及其应用的进展和前景.面临新世纪,PIV技术有望最终攻克一个容积的三维速度场时间历程(3Dt-3C)的观测和推动流体力学进入十分活跃的新时期.     

利用Visual C++实现流量计自动检定

介绍了利用Visual C 控制数据采集卡、数字多用表等,完成流量计的自动检定,结合Office嵌入式编成,实现一定格式的证书打印、数据保存、数据查询等功能.     

基于通用数字信号处理器的雷达坐标测量系统

介绍了由PC机主CPU与TMS320C32(以下简称C32)DSP构成的多目标雷达坐标测量系统，并将任务合理分配给PC机主CPU及C32负担，从而使PC机主CPU和C32在低价位下提供最佳性能。     

A systematic approach to nonlinear rotorcraft model identification

The development of a powerful parameter estimation routine and its integration into the simulation environment HOST is described. With this tool approaches are being made towards new strategies of mathematical modeling, aimed at providing highly accurate and nevertheless run-time efficient simulation models. The identification routine is capable of optimizing parameterized models in both dynamic time domain simulation and static (e.g. trim state variation) conditions. Examples of both cases are presented to emphasize the improvement in the system response prediction and to demonstrate the abilities of the identification techniques in combination with the nonlinear simulation platform. This article reviews the activities and achievements accomplished by the DLR Institute of Flight Research and the ONERA Systems Control and Flight Dynamics Department during the last few years in the research on rotorcraft flight dynamics modeling and model identification. Future activities that require extensive high fidelity modeling are in the scope of the current and coming modeling activities that include the use of the presented methods and software technologies.     

Analysis of total visual and CCD V-broadband observations of Comet C/1995 O1 (Hale-Bopp): 1995–2001

We developed a general method for determination of water production rates from groundbased visual observations and applied it to Comet Hale–Bopp. Our main objective is to extend the method to include total visual magnitude observations obtained with CCD detector and V filter in the analysis of total visual magnitudes. We compare the CCD V-broadband careful observations of Liller [Liller, W. Pre-perihelion CCD photometry of Comet 1995 O1 (Hale-Bopp). Planet. Space Sci. 45, 1505–1513, 1997; Liller, W. CCD photometry of Comet C/1995 O1 (Hale-Bopp): 1995–2000. Int. Comet Quart. 23(3), 93–97, 2001] with the total visual magnitude observations from experienced international observers found in the International Comet Quarterly (ICQ) archive. A data set of ∼400 CCD observations covering about the same 6 years time span of the ∼12,000 ICQ selected total visual magnitude observations were used in the analysis. A least-square method applied to the water production rates, yields power laws as a function of the heliocentric distances for the pre- and post-perihelion phases. The average dimension of the nucleus as well as its effective active area is determined and compared with values published in the literature.     

导航计算机应用软件快速更新方法研究

目前,大多数嵌入式开发系统的软件更新必须通过硬件仿真器来实现,不便于系统的维护.良好的可维护性是嵌入式系统性能的一个重要方面,在一定程度上决定系统能否被广泛应用.本文针对南航导航研究中心自主开发的微小型导航计算机,研究了利用串行通信的方式实现应用软件快速更新的方法,解决了程序的定位、代码传输等问题,提高了系统的可维护性,体现了方法研究的实用价值.     

MAP-CA在视频压缩中的应用

信息时代的重要特征是信息的数字化,但数字化的视频数据量是非常巨大的。为了使数字化的视频信号更有效地传输,对其进行压缩势在必行。应用MAP-CA这个DSP芯片可以对视频图像进行MPEG-4标准的压缩,压缩比可以达到1000:1。在公用电话线上就可以连续传输视频,并能保持图像的质量,最高图像清晰度为768×576,可以达到接近DVD的画面效果。     

双模式高度表的测高系统设计与研究

将恒定差频和恒定周期两种体制用于一个调频式高度表测高是一次新的尝试。本文介绍了一种基于C8051F330单片机与RS422总线的某型无人机双模式高度表的测高系统。在测高系统原理分析的基础上，建立了延迟时间可随高度数据而改变的测高系统。从测量方法和测试结果上分析，测量数据结果准确且稳定性好。     

直扩测控系统抗多址能力分析与验证

为了防止多址干扰造成接收机出现误捕和假锁,改善直接序列扩频测控系统抗多址干扰性能,在Gold码特性和扩频接收机性能分析的基础上,结合最大似然原理,对采用扩频体制测控系统的抗干扰能力进行了分析。为契合工程应用,采用仿真遍历结合理论分析的方式,对Gold码的互相关抑制能力理论值进行了工程修正。在分析捕获阶段的抗干扰捕获门限后,还分析了载噪比估计结果在正常锁定和假锁两种状态下的差异,给出了接收机对假锁状态的判决方法和门限。根据分析和仿真的结果,给出了系统设计约束条件和优化的接收机设计流程,作为测控系统和接收机设计的参考。     

基于SRAM型FPGA单粒子效应综合防护技术

为解决基于SRAM(Static Random Access Memory,静态随机存储器)型FPGA(Field Programmable Gate Array,现场可编程门阵列)的扩频应答机在空间环境中时常发生功能故障的难题,提出了一种低轨卫星基于SRAM型FPGA的应答机的单粒子综合防护方案。该方案在代码级、器件级、单机级、整星级综合采用器件优选、结构屏蔽设计、巡检自愈、自主复位等多种方法,有效杜绝了单粒子事件带来的种种危害,已成功应用于某在轨卫星。在轨测试结果表明:遥测、遥控、跟踪测量等功能、性能指标满足任务要求,且未发生需要地面干预的问题或现象。该技术还可推广应用于其他采用低等级器件及其他类型FPGA、DSP(Digital Signal Processing,数字信号处理)等大规模集成电路的星载单机防护。