A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

表面介质阻挡放电等离子体体积力实验

采用粒子图像测速(PIV)技术,在2200,4800,7300,14600Pa空气压力条件下,测量了高频高压表面介质阻挡放电(surface dielectric barrier discharge,SDBD)等离子体诱导流场.根据速度场和N-S方程求解了等离子体体积力分布,分析了空气压力和激励器电压对等离子体体积力影响.实验结果表明:相同空气压力时,激励器电压越高体积力越大.相同激励器电压时,体积力随空气压力升高减小.在体积力分布区域,体积力方向一致,较大体积力区域分布于体积力方向线上游,流场高速流动区域紧挨较大体积力分布区域,位于体积力方向线下游.     

基于试验的电动舵机模型辨识

目前电动舵机模型的建立基本上是基于理论的数学推导,所建立的舵机模型与实际舵机模型存在一定的误差。针对此问题,提出一种基于试验实测数据建立舵机模型的方法,搭建自动数据采集试验平台,采用组合窗法对实测数据进行频域转换,得到舵机的频率响应函数并采用非线性最小二乘法辨识舵机模型。对辨识得到的数学仿真结果与实际舵机响应比较,在频域,整个频段内幅频特性最大绝对误差1.9 dB;在时域,仿真模型跟踪实际舵机角度的最大误差1.5°,延迟时间10 ms。结果表明,基于试验数据建立的舵机仿真模型能很好地模拟实际舵机。     

Categorical Bias in Line Angle Judgments: Sex Differences and the Use of Multiple Categories

According to the Category Adjustment (CA) model, spatial estimates (e.g., of location) involve Bayesian combination across multiple, hierarchical pieces information, each weighted by its relative certainty. Recent work, though, has shown that men and women differ in terms of their certainty regarding fine-grained and categorical information in location memory. Here we demonstrate that this reflects a more general sex difference in visuospatial processing by examining bias patterns in a line angle judgment task (JLAP-15). In addition, the data suggest that multiple, hierarchical levels of categorical information influenced spatial judgments. These results imply that the hierarchical combination outlined by the CA model extends beyond two levels, and that men and women apply differential weighting to these representations.     

IDS contribution to ITRF2008

For the first time, the International DORIS Service (IDS) has produced a technique level combination based on the contributions of seven analysis centers (ACs), including the European Space Operations Center (ESOC), Geodetic Observatory Pecny (GOP), Geoscience Australia (GAU), the NASA Goddard Space Flight Center (GSFC), the Institut Géographique National (IGN), the Institute of Astronomy, Russian Academy of Sciences (INASAN, named as INA), and CNES/CLS (named as LCA). The ACs used five different software packages to process the DORIS data from 1992 to 2008, including NAPEOS (ESA), Bernese (GOP), GEODYN (GAU, GSC), GIPSY/OASIS (INA), and GINS (LCA). The data from seven DORIS satellites, TOPEX/Poseidon, SPOT-2, SPOT-3, SPOT-4, SPOT-5, Envisat and Jason-1 were processed and all the analysis centers produced weekly SINEX files in either variance–covariance or normal equation format. The processing by the analysis centers used the latest GRACE-derived gravity models, forward modelling of atmospheric gravity, updates to the radiation pressure modelling to improve the DORIS geocenter solutions, denser parameterization of empirically determined drag coefficients to improve station and EOP solutions, especially near the solar maximum in 2001–2002, updated troposphere mapping functions, and an ITRF2005-derived station set for orbit determination, DPOD2005. The CATREF software was used to process the weekly AC solutions, and produce three iterations of an IDS global weekly combination. Between the development of the initial solution IDS-1, and the final solution, IDS-3, the ACs improved their analysis strategies and submitted updated solutions to eliminate troposphere-derived biases in the solution scale, to reduce drag-related degradations in station positioning, and to refine the estimation strategy to improve the combination geocenter solution. An analysis of the frequency content of the individual AC geocenter and scale solutions was used as the basis to define the scale and geocenter of the IDS-3 combination. The final IDS-3 combination has an internal position consistency (WRMS) that is 15 to 20 mm before 2002 and 8 to 10 mm after 2002, when 4 or 5 satellites contribute to the weekly solutions. The final IDS-3 combination includes solutions for 130 DORIS stations on 67 different sites of which 35 have occupations over 16 years (1993.0–2009.0). The EOPs from the IDS-3 combination were compared with the IERS 05 C04 time series and the RMS agreement was 0.24 mas and 0.35 mas for the X and Y components of polar motion. The comparison to ITRF2005 in station position shows an agreement of 6 to 8 mm RMS in horizontal and 10.3 mm in height. The RMS comparison to ITRF2005 in station velocity is at 1.8 mm/year on the East component, to 1.2 mm/year in North component and 1.6 mm/year in height.     

人体热调节的有限元分析

本文根据人体的热调节机制建立了二维人体热调节的有限元模型，并设计了相应的实验对该模型进行了验证，实验结果与计算结果吻合较好，本模型对于以人体－环境热交换为内容的工程实践和理论研究有较高的应用价值。     

我校大学生心理健康状况不容乐观

本文用SCL－90症状自评量表方法，对我校三个年级的部分班级进行了测查。分析表明：我院大学生的心理健康状况不容乐观。本文还对学生管理现状提出了进一步改进建议。     

经营多角化的结合效应与度量

经营多角化多年来一直是产业经济学家和政策制定者关注的焦点之一。本文对如何取得多角化经营的结合效应作了分析,并给出了经营多角化的度量方法。     

超声速平面钝体流动的快速解法

本文介绍了一种平面流动的快速欧拉方程解法。该方法将原参数非定常欧拉方程组重新组合成以广义称曼变量表示的欧拉方程组，再用二点二步迎风格式离散解。针对钝体流动，本文先建立了动网格下的方程，构造了动网格下的算法。提出了一种简单的激波处理方法。计算结果表明，该方法速度快，稳定性好，对初场不敏感。     

小型弹体转动惯量的测定

阐述了对称式三线摆的结构原理及该摆微角与大角摆动周期的计算方法 ,利用此摆可以测量构件的转动惯量。当 RL <130 、φ0 <6 0°时 ,该装置的测量准确度优于 1%。