基于MBD的数字化检测工艺分工技术研究

随着数字化集成制造系统的发展与应用,数字化检测技术在数字化集成制造过程中起到了至关重要的作用,工程需求日益强烈.针对数字化检测过程中缺少较合理的检测工艺分工规划的现状,结合MBD技术,提出了基于MBD的数字化检测工艺分工的相关概念和关键技术.在考虑检测成本及检测时间为约束条件的前提下,根据检测变量构造检测工艺路线函数,实现了最优检测工艺路线的生成与检测工艺分工规划的匹配.     

武器舱气动噪声主动流动控制技术风洞试验研究

针对飞机弹舱高强度气动噪声、内埋武器分离安全性等问题,以高速风洞动静态压力测量技术为研究手段,开展了基于脉冲射流激励器（Powered Resonance Tubes,PRTB）的武器舱气动噪声抑制技术试验研究。试验结果表明,试验模型具有典型的开式空腔流动特点,武器舱内部非定常流动引起的声载荷可达到150dB。PIV 试验结果研究表明空腔前缘布置主动脉冲射流激励器对剪切层施加激励,会改变武器舱上部剪切层的流动特性,对这种高强度的声载荷起到一定的抑制作用。     

Wavelength dimensioning for wavelength-routed WDM satellite network

Internet and broadband applications driven by data traffic demand have become key dri-vers for satellite constellations. The key technology to satisfy the high capacity requirements between satellites is optical satellite networks by means of wavelength division multiplexing inter-satellite links (ISLs) with wavelength routing (WDM-OSN). Due to the limited optical amplifier bandwidth onboard the satellite, it is important to minimize the wavelength requirements to provi-sion requests. However, ISLs should be dynamically established and deleted for each satellite according to its visible satellites. Furthermore, different link assignments will result in different topologies, hence yielding different routings and wavelength assignments. Thus, a perfect match model-based link assignment scheme (LAS-PMM) is proposed to design an appropriate topology such that shorter path could be routed and less wavelengths could be assigned for each ISL along the path. Finally, simulation results show that in comparison to the regular Manhattan street net-work (MSN) topology, wavelength requirements and average end-to-end delay based on the topol-ogy generated by LAS-PMM could be reduced by 24.8%and 12.4%, respectively.     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

基于分数阶微积分理论的最优导引律设计

随着技术的发展及战场环境的日益复杂化,拦截机动目标的需求越来越大。然而传统制导律在拦截机动目标时存在制导精度差、末端过载突变的问题,故提出了一种基于分数阶微积分理论的最优导引律。首先,介绍了分数阶微积分的定义、性质及其数字实现方法;然后,分析了弹目相对运动关系,通过分数阶变阶次建模和最优控制理论推导出了分数阶导引律;最后,仿真结果表明：与传统比例导引法相比,所设计的分数阶最优导引律能够保持比例导引法良好的追踪性能且拦截时间能够缩短2s,末端过载值趋近于0。该方法解决了传统比例导引法在末端由视线角速率发散而导致的末端过载突变问题。     

射频阵列仿真系统的目标位置精度分析

射频阵列仿真系统是一种比较理想的导弹武器系统抗干扰试验环境,目标位置精度是射频阵列仿真系统的关键指标。阐述了影响目标位置精度的主要原因,并结合测量数据对其进行分析,为工程应用提供了参考。     

机载计算技术的新进展

导读:分析了未来信息化技术对航空武器装备和作战方式的影响,提出了机载计算技术的发展方向,并对国际的最新研究情况,包括跨平台分布式计算系统、分布式综合化模块化结构、高组装/功率密度技术、多核处理器应用、高安全机载操作系统、高安全无线网络等,进行了总结,对国内机载计算技术的发展具有一定的参考价值.     

空间激光通信系统光斑小目标跟踪算法研究

在空间激光通信链路中，大气湍流、结构设计误差、平台扰动等因素为链路的精确对准和精密跟踪带来了困难。为提高激光链路的跟踪精度，首先对光斑跟踪过程中的影响因素进行研究分析，继而对跟踪算法做出改进。针对跟踪目标特性，设计了一种自适应模板目标相关跟踪算法，并搭建了基于粗精复合轴跟踪系统的实验平台，开展了实验验证。结果表明：与当前常用跟踪算法相比，该设计处理速度可达 1 kfps，目标跟踪位置与真实位置基本重合，目标跟踪准确率高于98%，在处理速度、跟踪准确率与算法鲁棒性上均有较大提升，具有一定的实用性。     

拖靶系统挂机安装角度计算

拖靶安全释放是拖靶系统正常执行任务的前提,拖靶挂机安装角度的优劣直接影响着拖靶的安全释放.依据拖靶释放特性建立了拖靶系统动力学模型,提出了拖靶安全释放的条件,给出了拖靶挂机安装角度的计算方法;通过实例对方法的正确性进行了验证,其结果直接应用于某新型拖机改装试验中,取得了满意的效果.     

武器分离及舱门开启过程数值模拟研究

基于非结构重叠网格技术,发展了一套能较好模拟空腔流动和武器分离问题的数值计算方法.通过模拟典型空腔流动和WPFS模型分离轨迹,并与试验结果比较,说明本文方法可较好模拟空腔复杂流动和武器分离轨迹.采用发展的数值方法对某内埋弹舱舱门开启过程和内埋武器分离轨迹进行了数值模拟,研究了舱门运动的非定常效应对舱门气动特性的影响.研究表明:一定条件下,舱门运动产生的非定常效应对舱门气动特性影响较大,舱门和舱门控制系统设计时必须考虑；在本文给定条件下,弹舱内的内、外侧导弹均能安全分离.通过研究,为内埋弹舱的舱门设计和内埋武器分离安全评估提供了技术手段和依据.