大后掠机翼翼尖导弹动力响应空测与数据分析

 <正> 大后掠机翼翼尖挂导弹对外界干扰的动力响应很灵敏,这种干扰主要来自随机不稳定气流或各种突加载荷。为保证安全和防止导弹失控,摸清其响应值非常必要;除理论计算外,对可能遇到的不平稳气流和突加载荷在翼尖导弹上的动力响应进行了空测,并用频谱分析和功率谱密度分析处理了空测数据,制订了翼尖导弹振动与冲击试验谱,进行了地面试验与空中打靶试验,获得了满意结果。     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.     

一种折叠弹翼悬挂物的分离轨迹试验技术

提出了一种新的折叠弹翼悬挂物机弹分离轨迹试验技术,重点解决了在机弹分离过程中折叠弹翼动态展开时悬挂物的气动力获取问题。研究表明,提出的试验技术通过将悬挂物气动力修正方法引入到悬挂物分离安全性研究当中,准确地得到悬挂物的分离特性,解决了折叠弹翼悬挂物分离轨迹风洞试验技术瓶颈,为折叠弹翼悬挂物的投放分离安全性提供一套工程实用的解决方案。     

变循环发动机组合变几何调节方案

基于面向对象的设计思想,设计出了一个双涵道变循环发动机(VCE)的性能计算模型,并选取了双涵道VCE具有代表性的典型工作点,进行了双涵道VCE的组合变几何调节的相关研究.结果表明:在双涵道VCE的亚声速巡航和超声速巡航工作点,合理调节风扇导流叶片角度可以更大程度发挥双涵道VCE性能优势;在亚声速巡航工作点时选取的方案4和超声速巡航工作点时选取的方案4均比双涵道VCE设计点的变几何调节方案性能更优.     

基于ANSYS的机翼动力学分析

针对无人机在挂载导弹飞行和发射导弹时,无人机机翼由于受到多种载荷影响所产生的应力应变,应用ANSYS软件动力学分析,计算模拟了机翼在受到多种载荷影响时所产生的应力分布和应变量。分析结果表明,由于外挂物重量和机翼周围气动流场的影响,机翼会产生不同程度的颤振和扭转,其研究结果对合理设计机翼结构具有一定的参考意义。     

浅析俄罗斯战斗机CY—37“金雕”前掠翼三翼面气动布局的先进性

本文追溯了前掠翼的飞机的渊源。指出常规二翼面的后掠翼，变后翼和近矩耦合鸭式气动布局存在着妨碍机动进一步提高的缺点。     

一种基于承载效率准则的复合材料机翼结构布局优化方法(英文)

提出一种针对大型复合材料机翼结构的二级布局优化策略。系统级根据结构形变调整设计指标,子系统级优化结构布局以满足系统级约束。将机翼壁板中各种临界失效载荷的接近程度作为评判结构效率的标准,通过将结构效率作为优化目标,保证了所求解问题的连续性。加筋壁板通过等效的正交异性板模拟,并根据能量原理预测总体失稳载荷。讨论了加强筋支持弹性对于蒙皮抵抗局部失稳性能的影响,并通过神经网络代理模型对其进行逼近。采用解析模型对失效特性做出评估,减少了计算资源的占用。最后以一种大型机翼结构的综合优化作为算例,计算结果满足设计要求,验证了该方法的可行性。     

三角翼大幅度俯仰运动非定常测压实验洞壁干扰研究

用两个几何相似大小不同的前缘后掠角 70°三角翼模型在闭口风洞中进行正弦俯仰振荡实验 ,测量三角翼模型吸力面动态压力以及风洞洞壁上最佳测压点的非定常压力。实验表明 ,三角翼模型在正弦俯仰振荡时 ,其吸力面动态压力以及洞壁上最佳测压点的非定常压力与三角翼模型上的法向力一样呈现迟滞环现象。模型展宽比 (翼展 /洞宽 )增大 ,迟滞环幅度增大 ,动态压力绝对值增大。无论上仰或下俯 ,模型展宽比 (翼展 /洞宽 )增大 ,三角翼模型吸力面涡破碎位置离前缘较远。风洞顶壁上最佳测压点非定常压力迟滞环方向与风洞底壁上对应最佳测压点非定常压力迟滞方向相反。风洞洞壁上最佳测压点非定常压力变化频率与模型正弦俯仰振荡频率一致 ,各最佳测压点间呈现时间延迟现象。     

边条机翼布局战斗机稳定性改进研究

对边条机翼布局战斗机的纵，横向稳定性改进措施进行了研究，结合具体战斗机布局，给出了边条机翼布局战斗机纵，横向稳定性的一般特征，对前缘襟翼下偏，翼刀，平尾下反和机身截面修形等几种气动布局改进措施的风洞试验结果进行了简要讨论，结果表明，所研究的气动布局改进措施都能有效提高边条机翼布局战斗机的稳定性，其中，前缘襟翼下偏既能完全克服俯仰力矩曲线非线性上翘问题，又能较好地解决横侧向稳定性丧失问题。