氢燃料双模态冲压模型发动机M6的试验研究

笔者研究了一个有突扩台阶的氢燃料高超声速冲压发动机模型的气体动力学特性和推力特性。氢气从位于燃烧室突扩台阶后的支板逆来流喷注,测量了氢气燃烧状态下模型发动机壁面的压力分布和推力收益数据。实验结果表明,在氢气的当量油气比为0.35～0.8的范围,在本模型流道构型条件下,氢气自燃,并随当量油气比的增加,燃烧室内压力增加,获得的推力收益增大,最大推力收益达到500N。实验在CARDC的脉冲燃烧风洞中进行,实验马赫数为6,总温1850K,总压5.5MPa。     

关于稀疏分布存贮模型中A连接权阵的讨论

Ｋａｎｅｒｖａ的稀疏分布存贮模型由于对寻址地址采用了稀疏编码，对数据采用了分布式存贮，从而解决了大维数向量的输入问题，ＳＤＭ实际上是一个由输入层，中间层和输出层组成的三层前向网络，其中神经元间的互迦权值在输入层与中间层是预置的（用矩阵Ａ表示），中间层与输出层的连接权阵Ｃ由外积法得到，文中假定在相同的学习规则下，就信噪比意义而言，Ａ的均匀预置能使ＳＤＭ获得最优性能，从而为Ａ的预置提供了理论依据。     

多约束实数权的直接数据域算法在空时自适应处理中的应用

传统的空时自适应处理算法通过权矢量幅度和相位的改变来实现,本文研究了空时自适应处理中一种改进的直接数据域(Directdata domain,DDD)算法。该方法仅通过权矢量幅度的改变,对一次样本数据进行处理,有效地抑制杂波和干扰,实现对目标信号的正确估计。采用实数权减小了运算量,降低系统的复杂程度。当目标信号的方向与天线波束指向有偏差时,采用多约束的方法,保证系统在目标信号方向的增益。仿真结果表明该方法的有效性。     

应用扩展连续算法研究推力矢量飞机动力学特性

应用扩展的分支和连续算法对推力矢量控制飞机的飞行运动力学特性进行了研究。与标准的分支和连续算法不同，扩展后的分支和连续算法可用于计算飞机特定配平状态的连续曲线，所以不仅能获得飞行性能指标，同时可确定飞机的稳定性。本中扩展分支和连续算法被用于检验推力矢量控制律的有效性，确定了飞行包线边界，分析了配平飞行的稳定性的操纵性以及预测飞行偏离。结果表明，扩展连续方法可获得大量的飞行动力学信息，在推力矢量控制飞机的初步设计中具有广泛的应用前景。     

推力矢量和二元喷管

推力矢量是第四代战斗机获得过失速机动性的必要条件,而二元喷管又是推力矢量控制中性能较为优越的一类喷管。本文较全面地阐述了目前世界上推力矢量和二元喷管的发展和现况、二元喷管的构造和性能、二元喷管对改进飞机升阻特性和机动的作用。推力矢量能显著提高飞机在空战中的作战效率以及推力矢量控制所需的效能也在文中作了介绍。     

大厚度比零件（外侧）和波纹管（内侧）的缝焊研究

某重点型号波纹管组合件的设计要求是缝焊，对照以往产品的结构，比较明显的情况是波纹管在零件的内侧。零件的厚度是3mm，波纹管的厚度是0.1mm，零件与波纹管的厚度比比较大。波纹管在零件的内侧会产生一个问题：波纹管在焊接过程中会逐渐收缩，到最后与零件之间产生间隙，导致局部形不成焊缝。研究通过减小车配间隙,增加冷却手段、滚轮厚度和压力等措施来实现大厚度比的零件和波纹管之间的缝焊。     

基于微型涡喷发动机热喷流的无源流体推力矢量喷管的控制规律

流体推力矢量喷管型面固定、活动部件少、结构重量轻，能够为高机动飞行器提供有效的飞行控制手段，但无源流体推力矢量喷管热喷流的偏转控制规律尚未完全掌握。为了推进无源流体推力矢量技术的实用化，本文设计研制了适用于微型涡喷发动机的耐高温喷管模型，对该喷管在微型涡喷发动机热喷流状态下的控制规律进行研究。利用非接触光学显示和测量手段——红外热成像拍摄和粒子图像测速（PIV）技术对主射流流动特性进行研究，获得流动矢量角随二次流控制阀门闭合度变化的控制规律；利用六分量盒式天平测力实验研究无源流体推力矢量喷管的力学特性，获得推力矢量角随二次流控制阀门闭合度变化的控制规律。研究结果表明：该构型喷管在微型涡喷发动机热喷流下主射流连续可控偏转，最大流动矢量角为-12.3°/12.3°，最大推力矢量角为-12.9°/12.8°，控制规律接近线性，不存在主射流偏转突跳问题。     

Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

对空间碎片近距随遇悬停的控制方法及悬停燃耗分析

对空间碎片检视或抓捕操控中的悬停控制及燃耗问题进行了研究。通过C W方程，建立任务星近距随遇定点悬停控制模型，通过设计状态反馈控制器分析定点悬停的可控性以及推控要求，结果表明近距悬停需要与悬停位置相关的两个正交方向上的常值连续推力控制量，以及用于抵抗扰动的三轴向上的反馈变推力控制量。分析了近距随遇悬停的推控分系统配置，建立了长时近距随遇悬停的燃耗及燃耗速率的数学模型，最后分析了既满足安全距离需求、又满足悬停方位需求的最小悬停燃耗模型。