基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

介质材料对频率选择表面传输特性的影响

通过理论计算和实验验证分析了介质材料对频率选择表面传输特性的影响规律,讨论了蒙皮的厚度、介电常数,芯层厚度、介电常数四个因素对FSS的通带位置、宽度、损耗的影响。结果表明,蒙皮和芯层厚度增厚会使通带位置向低频移动,厚度减小通带位置向高频移动;蒙皮和芯层介电增大会使通带位置向低频移动,介电减小通带位置向高频移动。并测试了同样结构的FSS平板传输特性,理论分析和实验结果一致性较好。     

粗糙表面偏振二向反射分布函数的影响参数及其反演

针对目标偏振二向反射特性研究中模型参数难以准确确定的问题,分析了粗糙表面偏振二向反射分布函数的影响参数,并通过理论推导和仿真计算,研究了各参数对粗糙表面散射特性的作用机理。总结分析了现有参数反演方法,针对现有方法存在的理论缺陷,在P-G(Preist-Germer)模型的基础上,提出了利用"相对偏振分量-角度"的相关关系进行参数反演的方法,设计了参数反演算法,进行了标准反射板和绿漆表面的偏振二向反射特性测试实验,并根据实验数据进行了参数反演和模型验证。实验结果表明,改进的参数反演方法可准确反演所有模型参数。利用反演参数进行模型验证,结果显示模型预测数据与实验数据具有较好的吻合度,验证了模型的准确性。     

影响胶粘剂剪切强度因素的探讨

分析了在胶粘剂剪切强度检测过程中,胶接材料表面处理方法、胶层的厚度、测试时加的垫片厚度和试样的夹距距离、涂胶时的晾置时间等因素对检测结果影响。研究结果表明,上述因素不仅直接影响了胶粘剂粘接强度的大小,而且关系到胶粘剂剪切强度检测试验的测试结果。     

NH－93型有机氟涂料的研究

采用国产含氟乳液为基料，研究了辅料的种类和用量，涂料的组成及工艺参数对涂膜性能的影响，提出了能获得良好涂膜的ＮＨ－９３型氟涂料的配方和成膜条件。     

200km/h动力分散型电动旅客列车组车体表面压力分布试验研究

阐述了对我国首列200km/h动力分散型电动旅客列车组(先锋号列车)车体表面压力分布测试情况,对测量结果进行了较为详细的分析,最后用流场计算软件CFX对先锋号列车周围流场进行了数值模拟计算,并将计算结果与测量结果进行了对比,两者有较好的一致性。该研究结果可为空调装置及电器设备冷却风道进排风口位置的选取提供科学依据。     

核翼比法进行表面粗糙度的标定及测量

介绍了一种表面粗糙度标定及测量的新方法。通过标定一组标准样块的核翼比，可以实现该标定范围内待检样块的粗糙度测量，该方法稳定可靠，试验装置简单，数据处理方便，为表面粗糙度的非接触测量提供了较好的方案。     

液体火箭发动机涡轮泵机械密封磨损机理研究

对比分析了机械密封静环端面原始表面和磨损表面形貌,得到了磨损形式和内外径磨损差异;仿真分析了密封端面接触应力及温度场,分析了转速、介质压力等条件对端面接触应力和温度场的影响;探明了端面接触应力和温度变化对磨损性能的影响,阐述了机械密封的磨损机理。     

Radar Imaging of Mercury

Earth-based radar has been one of the few, and one of the most important, sources of new information about Mercury during the three decades since the Mariner 10 encounters. The emphasis during the past 15 years has been on full-disk, dual-polarization imaging of the planet, an effort that has been facilitated by the development of novel radar techniques and by improvements in radar systems. Probably the most important result of the imaging work has been the discovery and mapping of radar-bright features at the poles. The radar scattering properties of these features, and their confinement to permanently shaded crater floors, is consistent with volume backscatter from a low-loss volatile such as clean water ice. Questions remain, however, regarding the source and long-term stability of the putative ice, which underscores the need for independent confirmation by other observational methods. Radar images of the non-polar regions have also revealed a plethora of bright features, most of which are associated with fresh craters and their ejecta. Several very large impact features, with rays and other bright ejecta spreading over distances of 1,000 km or more, have been traced to source craters with diameters of 80–125 km. Among these large rayed features are some whose relative faintness suggests that they are being observed in an intermediate stage of degradation. Less extended ray/ejecta features have been found for some of the freshest medium-size craters such as Kuiper and Degas. Much more common are smaller (<40 km diameter) fresh craters showing bright rim-rings but little or no ray structure. These smaller radar-bright craters are particularly common over the H-7 quadrangle. Diffuse areas of enhanced depolarized brightness have been found in the smooth plains, including the circum-Caloris planitiae and Tolstoj Basin. This is an interesting finding, as it is the reverse of the albedo contrast seen between the radar-dark maria and the radar-bright cratered highlands on the Moon.     

一个简单有效的单值曲面消隐算法

本文给出一个在矩形定义域上单值双变量函数和单值插值光顺曲面的计算机图象显示中消去隐藏线的算法。该算法简单有效、存贮量小、实施快速,其子程序具有一定的通用性,可用于矩形定义域上所有类型的单值曲面的消隐问题,适用于各种类型的图象输出设备。该程序可以很容易地加到现有的任意单值曲面的造型程序中,对该曲面进行消隐处理。