Increased urinary excretion rates of serotonin and metabolites during bedrest

Astronauts are often on a voluntarily reduced energy intake during space missions, possibly caused by a metabolic or emotional stress response with involvement of the central serotonergic system (SES). We investigated 24 h urinary excretion (24 h-E) of serotonin (5-HT) and 5-hydroxyindol acidic acid as indicators of the SES in healthy males under two different normocaloric conditions: normal physical activity (NPA) and -6 degree head-down-tilt (HDT). HDT or NPA were randomly arranged with a recovery period of 6 months in between. 24 h-E of hormones varied widely among individuals. Values were higher in HDT compared to NPA. Assuming that the 24 h-E values are, beside being indicators for alterations in the number and metabolism of platelets. Also indicators of central SES, HDT condition seems to activate central SES in a higher degree compared to NPA. Therefore, changes in central SES might be involved in the mechanisms associated with space flight or microgravity, including possible maladaptations such as voluntary undernutrition.     

考虑燃料消耗均衡性的低轨通信星座在轨星座构型重构方法研究

针对低轨（low earth orbit,LEO）通信星座在轨重构问题，分析了低轨通信星座的特点，提出了4个重构指标，即全球平均覆盖率、燃料消耗均衡性、重构总时间和重构总速度增量，并分析了提高轨道高度的重构方式。采用基于分解的多目标进化算法（multiobjective evolutionary algorithm based on decomposition，MOEA/D）对重构进行建模分析。结果表明，模型优化结果可以得出多组最优解，构成帕累托前沿，并得出燃料消耗均衡性最优的解，针对两种失效模式得出的重构总时间均为3.6×105s，速度增量方差分别为261.4m2/s2和293.4m2/s2，这些解均可恢复星座原有的覆盖性能，并使燃料消耗最为均衡。     

吸气式电推进系统可行条件分析

吸气式电推进系统作为有可能实现长寿命超低轨飞行的技术而被关注。根据不同轨道环境条件，采用管状结构进气道、以及机械增压的吸气方式，讨论了吸气式电推进系统所需的可行条件。分析表明，在轨高度180~240km，航天器所需总功耗与迎风面之比需要大于2kW/m2，电推力器比冲需大于4×104m/s，方可满足推阻平衡需求。分析得出，实现吸气式系统在地球轨道的运用，关键技术在于增加气体收集效率并且降低收集功耗，同时电推力器的效率还需进一步提升。     

某飞行器推力矢量试验测力装置研制

为满足某飞行器推力矢量试验的测试要求,采用两台六分量应变天平和一个空气桥组成测力装置来实现飞机全机气动力和喷管推进特性同时分别测量。基于有限元软件,对天平的应变及空气桥对天平的干扰进行了分析。结果表明:空气桥对天平力分量的干扰值优于5%,对力矩(滚转力矩除外)分量的干扰值优于15%,达到了设计指标。通过校准获得了单独天平、天平带空气桥(充压、不充压)状态下的校准公式,校准结果表明:两台天平各分量的综合加载误差均优于0.3%,天平带空气桥(充压、不充压)状态下各分量的综合加载误差优于0.5%,空气桥对天平的干扰量值与有限元分析结果一致。理论分析与实测结果证明:研制的天平及空气桥达到了预定目标,它的测量精准度高,满足推力矢量风洞试验需求。     

Fault self-repair strategy based on evolvable hardware and reparation balance technology

In the face of harsh natural environment applications such as earth-orbiting and deep space satellites, underwater sea vehicles, strong electromagnetic interference and temperature stress,the circuits faults appear easily. Circuit faults will inevitably lead to serious losses of availability or impeded mission success without self-repair over the mission duration. Traditional fault-repair methods based on redundant fault-tolerant technique are straightforward to implement, yet their area, power and weight cost can be excessive. Moreover they utilize all plug-in or component level circuits to realize redundant backup, such that their applicability is limited. Hence, a novel selfrepair technology based on evolvable hardware（EHW） and reparation balance technology（RBT） is proposed. Its cost is low, and fault self-repair of various circuits and devices can be realized through dynamic configuration. Making full use of the fault signals, correcting circuit can be found through EHW technique to realize the balance and compensation of the fault output-signals. In this paper, the self-repair model was analyzed which based on EHW and RBT technique, the specific self-repair strategy was studied, the corresponding self-repair circuit fault system was designed, and the typical faults were simulated and analyzed which combined with the actual electronic devices. Simulation results demonstrated that the proposed fault self-repair strategy was feasible. Compared to traditional techniques, fault self-repair based on EHW consumes fewer hardware resources, and the scope of fault self-repair was expanded significantly.     

基于叶端定时的转子叶片动应变重构不确定性量化

基于叶片非接触式动应变重构理论,开展动应变重构不确定性量化方法研究。基于方差合成定理建立重构叶片动应变不确定性量化分析模型;以模拟转子叶片为研究对象,开展旋转叶片叶端定时试验,利用周向傅里叶算法获取不同叶端定时传感器布局下的测点振幅,通过最大熵方法拟合振幅分布概率密度函数,确定叶端定时测振的不确定性参数;结合Kriging代理模型和试验共振频率数据对叶片有限元模型进行修正,获取关键测点位移-应变转换因子,并获取考虑共振转速以及测点位置不确定性的转换因子不确定性参数;获取重构动应变的均值、标准不确定度和包含区间,与应变片测量数据作对比。结果表明,除5号叶片A测点外,测量动应变均位于重构动应变的95%置信度下的包含区间内,且所有叶片的应变片测点动应变重构误差不超过15%。     

Revisiting the space-time gradient method: A time-clocking perspective,high order difference time discretization and comparison with the harmonic balance method

This paper revisits the Space-Time Gradient (STG) method which was developed for efficient analysis of unsteady flows due to rotor–stator interaction and presents the method from an alternative time-clocking perspective. The STG method requires reordering of blade passages according to their relative clocking positions with respect to blades of an adjacent blade row. As the space-clocking is linked to an equivalent time-clocking, the passage reordering can be performed according to the alternative time-clocking. With the time-clocking perspective, unsteady flow solutions from different passages of the same blade row are mapped to flow solutions of the same passage at different time instants or phase angles. Accordingly, the time derivative of the unsteady flow equation is discretized in time directly, which is more natural than transforming the time derivative to a spatial one as with the original STG method. To improve the solution accuracy, a ninth order difference scheme has been investigated for discretizing the time derivative. To achieve a stable solution for the high order scheme, the implicit solution method of Lower-Upper Symmetric Gauss-Seidel/Gauss-Seidel (LU-SGS/GS) has been employed. The NASA Stage 35 and its blade-count-reduced variant are used to demonstrate the validity of the time-clocking based passage reordering and the advantages of the high order difference scheme for the STG method. Results from an existing harmonic balance flow solver are also provided to contrast the two methods in terms of solution stability and computational cost.     

一种用于飞机试验台的三分力传感器

多分力载荷传感器是一种常用的传感器,但通常当各分力的量程相差太大时难以取得良好的效果。提出了一种新型传感器结构形式,减少了各分力之间的耦合,使得在各分力量程不匹配的情况下亦可获得较高的测量精度。     

论航天器的热试验

论述了各种类型热试验 （热平衡试验、热真空试验、热循环试验） 在航天器研制中的重要性及它们的做法要点。针对当前试验中出现的问题, 强调了组件级, 尤其是电子电工产品热试验 （热真空试验及热循环试验） 和整星级发射星热真空试验对提高航天器可靠性所起的重要作用, 并提出了相应的建议。     

撞击平板的动力响应计算和实验研究

本文采用16节点立体等参元,进行了冲击速度为10～20m/s时的平板动力响应数值分析。程序中考虑了结构的大变形,采用全拉格朗日描述法,时间离散使用了纽马克法。文中分别对LY12CZ和PMMA两种材料平板的动力响应计算结果和试验结果作了比较。提出用HopkinsonBar装置测定平板在硬撞击下撞击总耦合载荷及撞击点挠度随撞击时间的分布关系。同时文中提供了上述两种材料的动态力学性能参数,由这些参数可以认为PMMA为应变率敏感材料,在高速撞击下呈现“脆化”现象,而LY12CZ则为应变率不相关材料,在冲击载荷下呈现良好的塑性变形特性。