单片微机在控制模型姿态角中的应用

用廉价单片微机８０９８装置（包括单片机外围芯片、辅助电路、角度显示器、控制程序等），控制多台大功率步进电机，实现模型姿态角的控制，并对如何利用软件来提高步进电机的运行频率，模型姿态角β、α和下转盘进行跟踪显示等有关技术进行了探讨。     

基于遗传-支持向量机的对置活塞二冲程柴油机气口高度优化

以某对置活塞二冲程柴油机为研究对象,基于一维仿真模型,利用遗传-支持向量机的方法,以油耗为优化目标,进行不同转速工况下进排气口高度组合的自动化寻优。结果表明:在1200r/min下,优化的进、排气口无量纲化高度组合为［0.075,0.105］,所得最小油耗为220.32g/(kW·h);对置活塞二冲程柴油机的气口最优高度应随着转速的提高逐渐增大;且在高转速(大于1600r/min)下,排气口最优高度增加趋势更加明显。      

Evaluation of SARAL/AltiKa performance using GNSS/IMU equipped buoy in Sajafi,Imam Hassan and Kangan Ports

Performance of SARAL/AltiKa mission has been evaluated within 2016 altimeter calibration/validation framework in Persian Gulf through three campaigns conducted in the offshore waters of Sajafi, Imam Hassan and Kangan Ports, while the altimeter overflew the passes 470, 111 and 25 on 13 Feb, 7 March and 17 June 2016, respectively. As the preparation, a lightweight buoy was equipped with a GNSS receiver/choke-ring antenna and a MEMS-based IMU to measure independent datasets in the field operations. To obtain accurate sea surface height (SSH) time series, the offset of the onboard antenna from the equilibrium sea level was predetermined through surveying operations as the buoy was deploying in the onshore waters of Kangan Port. Accordingly, the double-difference carrier phase observations have been processed via the Bernese GPS Software v. 5.0 so as to provide the GNSS-derived time series at the comparison points of the calibration campaigns, once the disturbing effects due to the platform tilt and heave have been eliminated. Owing to comparing of the SSH time series and the associating altimetry 1?Hz GDR-T datasets, the calibration/validation of the SARAL/AltiKa has been performed in the both cases of radiometer and ECMWF wet troposphere corrections so as to identify potential land contamination. An agreement of the present findings in comparison with those attained in other international calibrations sites confirms the promising feasibility of Persian Gulf as a new dedicated site for calibration/validation of ongoing and future altimetry missions.     

Plasma transport process in the equatorial/low-latitude ionosphere

The behaviour of the equatorial/low-latitude ionosphere and the transport processes during magnetic disturbed and quiet periods of a high solar activity year, 2014, in the American sector are investigated. Parameters used include vertical drift (Vz), transport term (W), NmF2, hmF2 and scale-height (H). The F2 plasma variations followed the diurnal local solar pattern, being higher at daytime. The sunset maximum and sunrise minimum peaks of hmF2 were directly opposite to the scale height (H) pattern. The plasma distribution was basically controlled by combined actions of the electrodynamic convection/thermospheric composition, which is geomagnetic activity dependent. The annual, semi-annual and winter-anomalies of the F2 parameters were higher at the dip equator in comparison with the low-latitude. The Vz pre-reversal peak magnitude coincided with hmF2 peak and the effects are more pronounced during geomagnetic disturbed conditions. The transport term pattern was similar to that of the scale height and it is suggested as a proxy parameter for quantifying low-latitude plasma irregularities and distribution of thermospheric composition.     

Assessment study of ionosphere correction model using single- and multi-shell algorithms approach over sub-Saharan African region

It is a known fact that ionosphere is the largest and the least predictable among the sources of error limiting the reliability and accuracy of Global Navigation Satellite Systems (GNSS) and its regional augmentation systems like Satellite Based Augmentation System (SBAS) in a safety-of-life application. The situation becomes worse in the Equatorial Ionization Anomaly (EIA) region, where the daytime ionization distribution is modified by the fountain effect that develops a crest of electron density at around ±15° to ±20° of the magnetic equator and a trough at the magnetic equator during the local noon hours. Related to this phenomenon is the appearance of ionosphere irregularities and plasma bubbles after local sunset. These may degrade further the quality of service obtained from the GNSS/SBAS system of the said periods. Considering the present operational augmentation systems, the accuracy and integrity of the ionosphere corrections estimate decreases as the level of disturbances increases. In order to provide a correct ionosphere correction to the user of GNSS operating in African EIA region and meet the integrity requirements, a certified ionosphere correction model that accurately characterizes EIA gradient with the full capacity to over-bound the residual error will be needed. An irregularities detector and a decorrelation adaptor are essential in an algorithm usable for African sub-Saharan SBAS operation. The algorithm should be able to cater to the equatorial plasma vertical drifts, diurnal and seasonal variability of the ionosphere electron density and also should take into account the large spatial and temporal gradients in the region. This study presents the assessment of the ionosphere threat model with single and multi-layer algorithm, using modified planar fit and Kriging approaches.     

航空活塞二冲程汽油机排气口高度优化研究

针对作为无人机动力的某可变排气二冲程发动机在去掉可变排气系统后对发动机性能的影响，利用Fire仿真软件建立了发动机的缸内工作过程仿真模型，通过仿真和试验的方法研究了去掉可变排气系统后的发动机特性，结果表明:去掉可变排气系统后在2000r/min、10%节气门开度和5500r/min、50%节气门开度条件下，发动机的扫气效率降低，输出功率下降。在此基础上，利用仿真研究的方法对排气口高度参数进行了优化研究。去掉可变系统后排气口高度最优值为36.3mm时可以在保证常用无人机飞行转速范围内，各工况下扫气效率较高，发动机指示功损失最小，输出功率可以满足无人机动力需求。      

带轴对称台阶的圆锥高超声速边界层转捩试验

在Ma 6风洞内，通过高频脉动压力测试技术和基于纳米粒子示踪的平面激光散射(NPLS)技术，分别对带前向、后向轴对称台阶的圆锥高超声速边界层转捩进行了试验研究。采用功率谱密度分析和互相关计算等方法对脉动压力数据进行分析，得到了边界层中扰动波的发展规律，定量分析了第二模态波的相关参数。结果显示：两种模型中第二模态波在沿流向向下游发展的过程中，其幅值均先增大再衰减、特征频率均逐渐减小；特征频率和传播速度整体上均随雷诺数的增大而增加(后台阶模型中特征频率由100 kHz增至196 kHz，前台阶中则由 97 kHz 增至174 kHz)、波长变化规律则与之相反(后台阶中由6.35 mm降至4.54 mm，前台阶由7.35 mm降至 4.66 mm )；后台阶模型中第二模态波初次出现位置比前台阶中更靠近上游，边界层转捩位置较前台阶前移。将NPLS结果与高频脉动压力测试结果进行对比，两者吻合较好。     

星载相控阵GNSS-R测高系统设计与实验

星载GNSS-R测高系统采用多波束相控阵天线和干涉互相关处理方式,接收北斗导航卫星和GPS导航卫星发射的L波段导航直射信号与海面反射信号,进行海面高度探测。详细介绍GNSS-R测高系统设计与实现、集成和外场试验等,外场试验不仅验证了相控阵GNSS-R测高系统功能,更重要的是验证了核心软件算法的正确性。GNSS-R测高系统适用于中尺度海洋现象的观测,可在时间和空间尺度上扩展雷达高度计的观测能力,并与之相互补充,有利于对复杂海面的中尺度结构进行较高时间分辨率的观测。GNSS-R测高仪为星载高精度海面高度探测提供了新型载荷。     

低空风切变危险尺度研究

飞机在低空风切变中飞行的危险性评估尺度是机载低空风切变探测、告警、回避系统设计中的关键之一。本文从飞行动力学的基本方程组出发,根据能量高度的概念,从理论上导出了低空风切变对飞行安全的危险尺度,经研究,风切变的危险主要表现在水平风的加速度U_wg和垂直风速度W_wg上。文中研究了U_wg和w_wg对危险尺度的定性、定量关系,提出了用水平风加速度这个目前机载设备能探测的参数来评估风切变的危险程度,为前视式机载低空风变探测传感器的设计提供了基础。     

基于LADRC的无人机高精度定高控制

针对复杂气流扰动对无人机（UAV）航迹高度控制的影响,对存在复杂气流扰动下的定高控制策略、控制结构和控制器参数优化展开研究,实现高精度高度控制。基于线性自抗扰控制（LADRC）确定总体控制架构,设计扩张状态观测器（ESO）观测估计纵向高度通道和速度通道中存在的总扰动,在控制中引入扰动补偿,减小扰动对系统输出造成的影响。对UAV在飞行过程中存在的大气紊流扰动或离散突风等风干扰分析其功率谱密度,构造考虑风扰动对高度影响、时域响应特性和稳定裕度的综合目标函数,通过粒子群优化算法得到具有高精度、高抗干扰性能的控制器参数,优化中考虑风干扰的功率谱密度分布,减小了控制器参数设计的保守性。通过与常规比例-积分-微分（PID）控制器控制效果进行对比,说明基于线性自抗扰控制器的纵向高度控制的优异性能。