火星车低气压无风热环境模拟试验技术

为模拟火星车工作时所处大温差、低气压环境,文章以自主研制的调温热沉系统和压力控制系统为依托,实现试验容器热沉系统温度在-135~27℃间任意快速调节,均匀性优于±5℃;试验容器内气体压力控制值与目标压力值之差在±10 Pa之内。在国内首次完成无风环境下的火星车温控模拟舱验证试验,为火星车热分析模型修正以及后续火星车有风热环境试验提供了参考。     

飞秒激光系统图像调焦装置以及方法

飞秒激光直写技术在复杂三维微结构加工领域具有显著优势，而调焦是否精准直接影响了所加工结构的完整度.提出了在光路中临时置入调焦光源和物的图像调焦技术，通过调节物的位置使其成像面与激光聚焦面一致，从而通过清晰可分辨的成像状态间接反映激光聚焦状态.利用Zemax软件模拟分析了原飞秒激光光路与加入调焦光源和物的调焦光路，二者可实现相同加工物镜后工作距离与良好成像质量，证明了该方法的可行性.通过分析得到该过程的成像误差主要由成像镜头焦深(3.9 μm)引起，我们获得的理想调焦精度可达到1/2焦深以内.设计了单层高度为5 μm的二层圆柱结构，通过多次实验验证了所加工元件高度误差在1.5 μm范围以内，与理论分析一致，满足飞秒激光系统的调焦要求.     

同步双小行星系统共振轨道设计

研究了同步双小行星系统中共振轨道的设计方法及演化规律。首先，基于双椭球模型建立探测器运动方程，并给出共振轨道初值选取方法。然后，利用改进并行打靶法，提出一种双小行星系统平面共振轨道两步修正方法。同时结合稳定性理论及分岔理论，给出双小行星系统三维共振轨道生成和延拓方法；最后，以双小行星系统1999KW4为例，设计了共振比为1∶1,1∶2,1∶3,1∶4,2∶3的平面和空间共振轨道族，并分析了共振轨道的特性及轨道周期和轨道能量的变化规律。给出的双小行星系统中共振轨道的设计方法具有普适性，对未来双小行星系统探测任务中的轨道设计具有一定的参考意义与借鉴价值。     

基于改进粒子群优化模糊控制的MPPT算法研究

在光照强度和温度变化时,常规的最大功率点跟踪(MPPT)算法难以快速准确地跟踪光伏系统最大功率点。针对此问题,设计了一种改进粒子群优化算法(PSO)的模糊控制器。首先,依据常规MPPT特性,设计了一种带调整因子的模糊控制算法以快速收敛到最大功率点；然后,采用参数自适应PSO对设计的模糊控制器调整因子进行动态优化。仿真结果表明:所设计的参数自适应PSO优化模糊控制器能快速准确地跟踪最大功率点,保证了MPPT的动态响应速度和稳态精度,提高了光伏系统的工作效率。     

Identification of seismic activity sources on the subsatellite track by ionospheric plasma disturbances detected with the Sich-2 onboard probes

Using a cylindrical Langmuir probe and the authors’ proprietary two-channel pressure transducer, ionospheric plasma parameter distributions along the orbit of the Sich-2 satellite (Ukraine, 2011–2012) were measured. This paper is concerned with identifying the space–time location of ionospheric plasma disturbance sources, including the epicenters of actual earthquakes (before or during the satellite flyover) and incipient earthquakes on the subsatellite track, from the measured distributions of the electron density and temperature and the neutral particle temperature along the satellite orbit. To do this, the measured ionospheric plasma parameter distributions are connected to the coordinates on the subsatellite track.It is shown that local disturbances in the electron density and temperature and neutral particle temperature distributions in the satellite orbit in the ionosphere may serve as indicators of seismic activity on the subsatellite track. The epicenters of incipient earthquakes may be set off from other plasma parameter disturbance sources associated with seismic activity using information provided by special monitoring and survey centers that monitor the current seismic situation.     

Backstepping sliding-mode control of stratospheric airships using disturbance-observer

In the presence of unknown disturbances and model parameter uncertainties, this paper develop a nonlinear backstepping sliding-mode controller (BSMC) for trajectory tracking control of a stratospheric airship using a disturbance-observer (DO). Compared with the conventional sliding mode surface (SMS) constructed by a linear combination of the errors, the new SMS manifold is selected as the last back-step error to improve independence of the adjustment of the controller gains. Furthermore, a nonlinear disturbance-observer is designed to process unknown disturbance inputs and improve the BSMC performances. The closed-loop system of trajectory tracking control plant is proved to be globally asymptotically stable by using Lyapunov theory. By comparing with traditional backstepping control and SMC design, the results obtained demonstrate the capacity of the airship to execute a realistic trajectory tracking mission, even in the presence of unknown disturbances, and aerodynamic coefficient uncertainties.     

A holistic approach to SIM platform and its application to early-warning satellite system

This study proposes a new simulation platform named Simulation Integrated Management (SIM) for the analysis of parallel and distributed systems. The platform eases the process of designing and testing both applications and architectures. The main characteristics of SIM are flexibility, scalability, and expandability. To improve the efficiency of project development, new models of early-warning satellite system were designed based on the SIM platform. Finally, through a series of experiments, the correctness of SIM platform and the aforementioned early-warning satellite models was validated, and the systematical analyses for the orbital determination precision of the ballistic missile during its entire flight process were presented, as well as the deviation of the launch/landing point. Furthermore, the causes of deviation and prevention methods will be fully explained. The simulation platform and the models will lay the foundations for further validations of autonomy technology in space attack-defense architecture research.     

航电系统集成验证环境中的试验总控系统建设

针对国内军用航空修理行业系统级综合试验现状,根据航电集成验证环境中总控系统的特点和应具有的基本功能,结合视情维修需求及现代软硬件技术状态和成熟试验验证的手段,介绍了航电系统集成验证环境中总控系统的建设思路,给出了总控系统硬件及上位机测试软件的实现方案。该总控系统的应用将提升航电系统的修理验证能力。     

超宽带变频系统中的本振产生技术研究

本振源是超宽带变频系统中的核心部件，本文以超宽带上变频系统为例，介绍变频系统中本振信号的产生技术。本文所设计的超宽带变频系统，经过三次上变频，可将(0.8~2.8)GHz 的低频信号变换至（0.5~40）GHz。变频过程中需要一系列点频本振和一组宽带本振，基于PLL+DFS 的方法产生点频本振，基于DDS+DFS 的方式产生宽带本振。     

A novel framework for liquid propellant engine’s cooling system design by sensitivity analysis based on RSM and multi-objective optimization using PSO

One of the challenges of combustion chamber and nozzle design in a Liquid Propellant Engine (LPE) is to predict the behavior and performance of the cooling system. Therefore, while designing, the optimization of the cooling system is always of great importance. This paper presents the multi-objective optimization of the LPE’s cooling system. To this end, a novel framework has been developed, resulting from the application of the Response Surface Method (RSM) and the correlation coefficients matrix, sensitivity analysis and the The Particle Swarm Optimization (PSO). based on this method, the input variables, constraints, objective functions, and their surfaces were identified. In terms of multi-optimization algorithms, RSM and PSO are utilized to get global optimum. In conclusion, the methodology capability is to optimize the LPE’s cooling system, 6 percentage increase in total heat transfer and 7 bar decrease cooling system pressure loss, which resulted in a 1.2-seconds increase in the specific impulse of the engine.