力同轴度自动检测技术研究

叙述力同轴度自动检测技术:基本假设、计算模型的建立及数据处理方法.根据计算模型设计了自动测量系统,用3支光栅式引伸计和数据转换器,能直接实时测量力同轴度和偏心方向,不仅具有很好的适用性,还具有一定的工程应用前景.     

复杂构件RTM整体成型工艺设计与仿真研究

以飞机预冷气引起口为典型构件,对其成型工艺进行探索,选择RTM成型工艺并应用PAM-RTM软件对RTM成型工艺影响参数进行虚拟仿真,确定模具设计的最终参数值.     

Plastic wrinkling prediction in thin-walled part forming process:A review

The precision forming of thin-walled components has been urgently needed in aviation and aerospace field. However, the wrinkling induced by the compressive instability is one of the major defects in thin-walled part forming. The initiation and growth of the wrinkles are interac-tively affected by many factors such as stress states, mechanical properties of the material, geometry of the workpiece and boundary conditions. Especially when the forming process involves compli-cated boundary conditions such as multi-dies constrains, the perturbation of clearances between workpiece and dies and the contact conditions changing in time and space, etc., the predication of the wrinkling is further complicated. In this paper, the current prediction methods were summa-rized including the static equilibrium method, the energy method, the initial imperfection method, the eigenvalue buckling analysis method, the static-implicit finite element method and the dynamic-explicit finite element method. Then, a systematical comparison and summary of these methods in terms of their advantages and limitations are presented. By using a combination of explicit FE method, initial imperfection and energy conservation, a hybrid method is recommended to predict plastic wrinkling in thin-walled part forming. Finally, considering the urgent requirements of com-plex thin-walled structures’ part in aviation and aerospace field, the trends and challenges in wrin-kling prediction under complicated boundary conditions are presented.     

钣金成形信息化发展关键技术

钣金成形广泛应用在航空、汽车、船舶等各个行业,而钣金成形信息化在钣金成形技术中起重要作用.钣金成形信息的存储方式、关联技术、信息规范技术、数据库技术、钣金成形信息共享平台技术、钣金成形信息的获取和利用技术,是钣金成形信息化的关键技术.通过这些关键技术规范钣金成形信息的表达、存储方式,建立完善的钣金成形信息平台,利用数据挖掘技术,为钣金成形技术人员提供钣金成形工艺方案、工艺规程、模具设计需要的充足的信息.钣金成形信息化技术的发展将理顺钣金成形信息的积累和利用,消除信息孤岛,提高钣金成形的整体工艺水平和工艺准备效率.     

Plastic deformation analysis and forming quality prediction of tube NC bending

Plane strain assumption and exponent hardening law are used to investigate the plastic deformation in tube bending. Some theoretical formulae including stress, curvature radius of neu-tral layer, angle of neutral layer deviation, bending moment, wall thickness variation and cross-section distortion, are developed to explain the phenomena in tube bending and their magnitudes are also determined. During unloading process, the springback angle is deduced using the virtual work principle, and springback radius is also given according to the length of the neutral layer which remains unchanged before and after springback. The theoretical formulae are validated by the experimental results or the validated simulation results in literature, which can be used to quickly predict the forming quality of tube numerical control (NC) bending.     

脉冲电流在塑性加工中的应用

金属材料塑性变形时通入脉冲电流,在力学性能方面:材料的流变应力下降、塑性变形能力提高,同时有助于内部裂纹的止裂甚至愈合;在微观效应方面:电流的引入可以改善组织状态,加快再结晶过程,细化晶粒。在自阻加热工艺中,电流直接对坯料加热,降低了能耗,电流加热速度快,提高成形效率。举例说明了电流在热冲压技术、轧制技术和超塑成形技术等塑性加工工艺中的应用。在节能和高效成为材料加工领域主题的今天,脉冲电流在塑性加工领域的应用可以有力地推动尖端制造业,尤其是航空航天制造产业的发展。大量研究也已证明脉冲电流在材料加工领域有着深远的研究意义和广泛的应用价值。     

新型Al-Li-Cu-Mg合金蒙皮拉伸成形特性试验研究

随着新型Al-Li-Cu-Mg合金蒙皮在航空航天等高技术工业的应用日益广泛,新型Al-Li-Cu-Mg合金蒙皮拉伸成形特性已成为新型Al-Li-Cu-Mg合金板蒙皮成形质量精确控制以及蒙皮设计迫切需要解决的关键问题.因此,首先获得了新型T8态Al-Li-Cu-Mg合金的最佳热处理工艺参数;其次,采用试验方法,研究了不同热处理状态的拉伸成形过程,揭示了新型Al-Li-Cu-Mg合金板材的拉伸成形特性.发现通过固溶处理,后续时效能够显著提高新型T8态Al-Li-Cu-Mg合金材的拉形能力;在新型A1-Li-Cu-Mg合金板材拉形过程,桔皮现象主要出现在补拉阶段,蒙皮悬空区应变值＞0.0215时,板材表面将出现桔皮,且与材料热处理状态无关.     

大阻尼高刚度复合材料仪表板的设计结构与工艺研究

设计了一种五层夹芯多层阻尼薄膜嵌入的复合材料仪表板结构,并采用多次热压罐固化成型工艺来制作该大阻尼高刚度复合材料仪表板.它们分别是:上、下蒙皮和中心层的制作,上、下蒙皮和中心层与泡沫塑料的粘接与紧固件的预埋,孔的修正及仪表板的包边加工.通过成形质量检验和加载试验,验证了成形工艺的可行性和合理性.     

热变形对TC4氩弧拼焊板拉伸与疲劳性能的影响

在700℃下,对TC4氩弧拼焊板进行了3个变形量(主应变0.5％、1.6％、2.7％)的等双向拉伸成形,研究了热变形对TC4氩弧拼焊板单向拉伸性能和疲劳寿命的影响.结果表明:等双拉变形前后,TC4氩弧拼焊板拉伸试样均断裂在焊接热影响区,热影响区的强度低于母材和焊缝.随着等双拉热变形量增加,TC4拼焊板试样疲劳寿命有所增加,这是因为一定变形量的热成形释放了焊接残余应力.     

热压罐和RTM成型的C型框弯曲试验研究

通过热压罐和RTM成型工艺的复合材料C型框弯曲试验,研究了两种工艺方法对其承载能力及破坏模式的影响.试验结果表明:热压罐成型的隔框承载能力比RTM成型工艺高27.5％,且其分散性小;两种工艺的破坏位置一致,但RTM成型的隔框在平直段与弯曲段过渡截面处外壁先发生分层,而热压罐成型在该处外壁至破坏前才出现分层损伤.该结论可以为该型结构的工程应用提供有价值的参考.