基于UKF的双机协同纯角度目标定位路径规划

针对三维空间双机协同定位问题,在无迹卡尔曼滤波的基础上,提出一种规划双机路径的方法。首先,利用双机探测得到的方位角和俯仰角信息,并结合无迹卡尔曼滤波算法估计目标的状态;在此基础上根据交互信息理论提出指标函数的概念,以指标函数最大为轨迹优化的最优性能指标,将问题转化为求双机控制量的最优解;最后,采用遗传算法求解双机的控制量,得到比较合理的双机飞行路径。仿真结果表明,通过最大化指标函数可以有效地规划双机路径,且具有更高的精度和速度。     

大航向角误差情况下飞行中对准研究

为了解决飞行器在大航向角误差的情况下进行飞行中对准的难题,将一种线性大航向角误差模型应用于飞行器飞行中对准的过程.详细推导了线性大航向角误差模型,设计了飞行器在大航向角误差情况下进行飞行中对准的卡尔曼滤波模型,并进行了数字仿真.仿真结果表明,线性大航向角误差模型应用于飞行器飞行中对准,能够很好地解决飞行器在大航向角误差情况下进行对准的难点,并给出了适合于大航向角误差模型的机动方式.最后,提出了线性大航向角误差模型在工程应用中的几点建议     

一种扩展的比例导引规律及其弹道方程的构建

在传统的动力学微分方程的基础上提出了一种扩展的比例导引法 ,并给出了该导引规律下的相对弹道方程。文中的推理过程表明 ,这种导引规律对导弹、目标的运动速度几乎没有限制 ,理论上说明运用该制导规律的导弹将能对付高机动大速度目标 ,其弹道方程的建立 ,使得研究该制导规律下的弹道特性成为可能。     

具有多个执行机构Lurie系统的时滞相关稳定性

Ｌｕｒｉｅ时滞控制系统是工程实践中经常遇到的一类重要的非线性控制系统，本文根据微分方程理论，提出了不确定性具有多个执行机构的Ｌｕｒｉｅ时滞控制系统时滞相关稳定的充分性判据，并给出系统衰减速度的估计方法。该方法仅需假定时滞有界，因而其结论适扩用于变时滞的系统。文末给出应用本文结果的两个应用实例，并与相关成果进行了比较，计算结果表明了本文方法的有效性。     

NONLINEAR FILTERING ALGORITHM FOR INS INITIAL ALIGNMENT

The initial alignment error equation of an INS (Inertial Navigation System) with large initial azimuth error has been derived and nonlinear characteristics are included. When azimuth error is fairly small, the nonlinear equation can be reduced to a linear one. Extended Kalman filter, iterated filter and second order filter formulas are derived for the nonlinear state equation with linear measurement equation. Simulations results show that the accuracy of azimuth error estimation using extended Kalman filter is better than that of using standard Kalman filter while the iterated filter and second order filter can give even better estimation accuracy.     

Development,integrated investigation,laboratory and in-flight testing of Chibis-M microsatellite ADCS

Design, analytical investigation, laboratory and in-flight testing of the attitude determination and control system (ADCS) of a microsatellites are considered. The system consists of three pairs of reaction wheels, three magnetorquers, a set of Sun sensors, a three-axis magnetometer and a control unit. The ADCS is designed for a small 10–50 kg LEO satellite. System development is accomplished in several steps: satellite dynamics preliminary study using asymptotical and numerical techniques, hardware and software design, laboratory testing of each actuator and sensor and the whole ADCS. Laboratory verification is carried out on the specially designed test-bench.In-flight ADCS exploitation results onboard the Russian microsatellite “Chibis-M” are presented. The satellite was developed, designed and manufactured by the Institute of Space Research of RAS. “Chibis-M” was launched by the “Progress-13M” cargo vehicle on January 25, 2012 after undocking from the International Space Station (ISS). This paper assess both the satellite and the ADCS mock-up dynamics. Analytical, numerical and laboratory study results are in good correspondence with in-flight data.     

A residual based adaptive unscented Kalman filter for fault recovery in attitude determination system of microsatellites

This paper presents an adaptive unscented Kalman filter (AUKF) to recover the satellite attitude in a fault detection and diagnosis (FDD) subsystem of microsatellites. The FDD subsystem includes a filter and an estimator with residual generators, hypothesis tests for fault detections and a reference logic table for fault isolations and fault recovery. The recovery process is based on the monitoring of mean and variance values of each attitude sensor behaviors from residual vectors. In the case of normal work, the residual vectors should be in the form of Gaussian white noise with zero mean and fixed variance. When the hypothesis tests for the residual vectors detect something unusual by comparing the mean and variance values with dynamic thresholds, the AUKF with real-time updated measurement noise covariance matrix will be used to recover the sensor faults. The scheme developed in this paper resolves the problem of the heavy and complex calculations during residual generations and therefore the delay in the isolation process is reduced. The numerical simulations for TSUBAME, a demonstration microsatellite of Tokyo Institute of Technology, are conducted and analyzed to demonstrate the working of the AUKF and FDD subsystem.     

基于剪裁技术考虑的某冲击试验分析

利用环境工程剪裁技术对某冲击试验的结果进行分析,结果表明,按照引用标准评定为"超差"的试验,当考虑到试验件结构的特性并进行必要的数据转换后,试验结果是有效。首先分析造成超差的原因为天线组件的剩余响应,然后通过频域数字滤波进行数据转换。     

基于纵向滤波的星敏感器低频误差在线估计

多敏感器数据融合是获得更高精度姿态测量的有效方法，敏感器数据融合前必须先修正低频误差。首先，介绍了星敏感器低频误差（LFE）的产生机理及对其在线估计的必要性。其次，针对传统算法的不足，提出了基于纵向滤波的低频误差在线估计算法，该算法将传统低频误差估计问题转化为若干个常值误差估计问题，提高了估计精度。最后，给出了该算法具体实施方式，说明相关参数物理意义及选取原则。通过理论分析及仿真，算法误差可忽略不计。通过在轨数据仿真，星敏感器轨道周期低频误差可被消除。     

基于精确伪距率观测模型的GPS/SINS组合导航系统研究

从泰勒公式及函数矩阵的基本定义出发，推导了考虑位置误差相关项时，GPS/SINS组合导航系统精确的伪距率观测数学模型。仿真结果表明，使用精确伪距率观测模型的伪距、伪距率交替组合导航系统，其位置误差能更好地跟踪GPS系统位置几何误差系数，能更真实地反映载体的短期位置误差，更适用于对航天器或大气飞行器短期位置导航精度要求较高的场合（如把航天飞机或大气飞行器作为高分辨率合成孔径雷达等遥感器的载体）。