飞行器径向连接螺栓振动断裂分析

应用有限元分析结合试验数据,获得随机振动环境下飞行器径向连接螺栓的载荷功率谱密度（PSD）;采用基于弯曲效应的载荷与应力的线性关系,获取螺栓头根部的名义应力功率谱密度;基于Dirlik经验公式,获取应力随机过程的峰值概率密度函数和预期波峰数,联合Miner线性累积损伤模型及经应力集中系数修正的材料S-N曲线,评估径向连接螺栓头根部振动疲劳寿命,获得的结果与试验螺栓头断裂现象符合,并确定螺栓断裂原因为低频共振疲劳。     

Particle flters for probability hypothesis density flter with the presence of unknown measurement noise covariance

In Bayesian multi-target fltering,knowledge of measurement noise variance is very important.Signifcant mismatches in noise parameters will result in biased estimates.In this paper,a new particle flter for a probability hypothesis density（PHD）flter handling unknown measurement noise variances is proposed.The approach is based on marginalizing the unknown parameters out of the posterior distribution by using variational Bayesian（VB）methods.Moreover,the sequential Monte Carlo method is used to approximate the posterior intensity considering non-linear and non-Gaussian conditions.Unlike other particle flters for this challenging class of PHD flters,the proposed method can adaptively learn the unknown and time-varying noise variances while fltering.Simulation results show that the proposed method improves estimation accuracy in terms of both the number of targets and their states.     

Ionospheric electron density over Resolute Bay according to E-CHAIM model and RISR radar measurements

In this study, predictions of the E-CHAIM ionospheric model are compared with measurements by the incoherent scatter radars RISR at Resolute Bay, Canada, in the northern polar cap. Reasonable coverage was available for all seasons except winter for which no conclusions were drawn. It is shown that ratios of the model-to measured electron densities are close to unity in the central part of the F layer, around its peak. This is particularly evident for summer daytime. Distributions of the ratios are wider for other seasons indicating larger number of cases when the model underestimates or overestimates. E-CHAIM underestimates the electron density at ionospheric topside and bottomside by ～ 10–20 %. At the bottomside, the underestimations are strongest in summer and equinoctial nighttime. At the topside, the underestimations are strongest in autumn nighttime. Model overestimations are noticeable in the middle part of the F layer during dawn hours in autumn. Overall, the model tends to not predict highest-observed peak electron densities and the largest-observed heights of the peak.     

Testing the three-dimensional IRI-SIRMUP-P mapping of the ionosphere for disturbed periods

This paper describes the three-dimensional (3-D) electron density mapping of the ionosphere given as output by the assimilative IRI-SIRMUP-P (ISP) model for three different geomagnetic storms. Results of the 3-D model are shown by comparing the electron density profiles given by the model with the ones measured at two testing ionospheric stations: Roquetes (40.8°N, 0.5°E), Spain, and San Vito (40.6°N, 17.8°E), Italy. The reference ionospheric stations from which the autoscaled foF2 and M(3000)F2 data as well as the real-time vertical electron density profiles are assimilated by the ISP model are those of El Arenosillo (37.1°N, 353.3°E), Spain, Rome (41.8°N, 12.5°E), and Gibilmanna (37.9°N, 14.0°E), Italy. Overall, the representation of the ionosphere made by the ISP model is better than the climatological representation made by only the IRI-URSI and the IRI-CCIR models. However, there are few cases for which the assimilation of the autoscaled data from the reference stations causes either a strong underestimation or a strong overestimation of the real conditions of the ionosphere, which is in these cases better represented by only the IRI-URSI model. This ISP misrepresentation is mainly due to the fact that the reference ionospheric stations covering the region mapped by the model turn out to be few, especially for disturbed periods when the ionosphere is very variable both in time and in space and hence a larger number of stations would be required. The inclusion of new additional reference ionospheric stations could surely smooth out this concern.     

飞行器设计偏差量建模方法研究

对设计变量的偏差量进行建模,拟合偏差量服从的概率密度函数,是分析评价飞行器性能和概率设计的重要基础.针对常用分布拟合能力有限,以及混合Gamma分布无法在整个数轴上对试验数据进行拟合的问题,在论证混合Gauss分布拟合任意概率密度函数合理性的基础上,提出了利用混合Gauss分布对试验数据进行拟合,并运用期望极大化算法(...     

CBOC调制信号及其新型相关函数研究

介绍了复用二进制偏置载波（MBOC）信号的功率谱特性特点,用仿真方法讨论了复合二进制偏置载波（CBOC）信号时域表示及其功率谱密度、自相关函数和伪码跟踪性能,证明了CBOC信号的优越性。针对CBOC信号自相关函数多峰性,给出了一种CBOC信号新型相关函数的产生方法。     

高精度光纤IMU的磁屏蔽方法及实验研究

惯性测量单元(IMU)是位置姿态系统(POS)的核心部分,IMU的精度很大程度上决定着POS精度.由于高精度光纤陀螺(FOG)的光纤线圈对磁场敏感,基于高精度FOG的IMU精度会受磁场影响而降低.本文研究了FOG磁敏感性机理,通过实验得出高精度光纤IMU对磁场敏感的结论.采用电磁场有限元分析软件Ansoft Maxwe...     

电弧加热发动机羽流电子温度及电子数密度的双静电探针测量

研制了一套双静电探针测量系统,对以氩气为推进剂的1kW级电弧加热发动机羽流进行了测量,得到了电子温度和电子数密度的轴向和径向分布,以及随弧电流、气流量的变化趋势。结果表明,羽流显著偏离局域热力学平衡状态,电子温度呈现复杂的分布和变化趋势。羽流轴线上的电子温度明显低于偏离轴线处的值,而电子数密度远高于偏离轴线处的值;羽流轴线上的电子温度随弧电流的增加而降低,电子数密度随弧电流的增加而增加;羽流中心区电子温度随气流量的变化趋势不明显。     

复合材料帽形加筋结构稳定性研究

建立了复合材料帽形加筋结构的参数化有限元模型,给出了两种进行层板结合处的模拟计算方法,通过计算得到了模型的屈曲载荷并总结了加筋结构几何参数对结构稳定性的影响,给出了模型的收敛性分析,对比了模型网格密度对于计算结果的影响,找到最佳的网格密度,提高了模型计算的效率和准确性,为实际的结构设计提供了重要参考,为结构分析提供了依据。     

连续体结构拓扑优化方法评述

连续体结构拓扑优化在优化中能产生新的构型,对实现自动化智能结构设计具有重要意义。目前,连续体结构拓扑优化方法主要有：均匀化方法、变厚度法、变密度法、渐进结构优化方法、水平集法、独立连续映射方法。本文首先系统回顾了以上方法的发展历程,介绍了它们的研究现状。其次,通过对比以上拓扑优化方法对若干典型算例的优化结果,表明以上方法都有较好的减重效果。最后,对以上方法进行了总结,列出了它们的优缺点和发展方向。