基于FW-H方程的旋翼气动声学计算研究

由流体力学N S方程导出的非齐次波动方程———FfowcsWilliams Hawkings方程(简称FW H方程),可以精确地描述在静止流体中运动的物体与流体相互作用的发声问题。以FW H方程为理论模型,将旋翼桨叶运动发声问题等效为包含桨叶的任意运动控制面(声源面)的声辐射问题,并在旋翼绕流Euler方程数值模拟的基础上,在时域内计算了悬停旋翼和前飞旋翼的声场。应用于UH 1H和AH 1/OLS两种旋翼模型的气动声学计算表明:计算结果与噪声实验值符合良好;所研制的程序不仅能够较准确地计算单极子噪声和偶极子噪声,而且具有较强的跨音速四极子噪声预测能力。     

基于MSC/PATRAN的飞机结构强度静力试验数据实时跟踪与处理系统开发

 在Windows环境下,以MSC/PATRAN为平台，利用平台提供的二次开发语言PCL(Patran Command Language)，并结合C++语言，通过客户化、增设特定的命令和窗体等技术开发了飞机结构强度静力试验数据实时跟踪与处理系统TestDTAS（Test Data Tracking, Analyzing and Processing System）。在结构试验进行中，TestDTAS可以实时地监测结构试验件中应力和位移的变化情况，并与理论分析结果进行对比，而在试验结束后，TestDTAS可以进行试验数据回放和分析，从而将试验与理论分析有机的结合在一起，对结构静力试验和结构设计有很高的实用价值。     

C/C复合材料1 800℃抗氧化涂层探索研究

提出并制备了可以应用于1 800℃的抗氧化涂层体系,固渗法制备SiC内层,料浆涂刷法制备高温氧化物釉层和硼硅化物釉层.经扫描电镜分析涂层形貌及电子能谱分析其组成,发现C/C复合材料基材结构完整,没有发生次表面氧化.试验结果表明氧乙炔焰烧蚀20 s后,失重为0.06%;1 800℃自然对流氧化试验条件下,氧化物釉层30 min的平均失重速率为0.06g/(m2·s);硼硅化物釉层60min的平均失重速率为0.2g/(m2·s).说明涂层体系在1 800℃具有良好的抗氧化能力.     

Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

Low threshold particle arrays

While atmospheric Cherenkov telescopes have a small field of view and a small duty fraction, arrays of particle detectors on ground have a 1 sr field of view and a 100% duty fraction. On the other hand, particle detector arrays have a much higher energy threshold and an inferior hadron rejection as compared to Cherenkov telescopes. Low threshold particle detector arrays would have potential advantages over Cherenkov telescopes in the search for episodic or unexpected sources of gamma rays in the multi-TeV energy range. Ways to improve the threshold and hadron rejection of arrays are shown, based on existing technology for the timing method (with scintillator or water Cherenkov counters) and the tracking method (with tracking detectors). The performance that could be achieved is shown by examples for both methods. At mountain altitude (about 4000 m or above) an energy threshold close to 1 TeV could be achieved. For any significant reduction of the hadronic background by selecting muon-poor showers a muon detection area of at least 1000 m² is required, even for a compact array.     

芳纶纤维／环氧复合材料界面超声连续改性处理

运用超声技术在芳纶/环氧复合材料制备过程中对其界面进行改性处理,分析了超声处理过程中纤维与树脂之间浸润性的变化趋势以及超声作用对复合材料界面性能和力学性能的影响。结果表明:超声是通过改善纤维与树脂之间的浸润性,提高复合材料的界面性能及力学性能。     

基于BP人工神经网络的GPS／SINS组合导航算法

基于扩展Kalman滤波的GPS／SINS组合导航算法，需要对原始的非线性连续系统模型进行线性化和离散化处理，要求系统噪声和测量噪声为零均值的高斯白噪声，且易于出现滤波器发散。BP人工神经网络毋需对所求解的问题建模，能够很好地逼近系统非线性特性，获得较高精度的导航定位信息；还具有计算过程稳定，不涉及矩阵求逆，不需要迭代逼近，以及容易实现并行处理等优点。本文设计适用于GPS／SINS组合导航系统的BP网络模型，并在标准的BP算法基础上，采用共轭梯度法改进网络训练速度及精度。最后，通过仿真算例说明BP网络方法用于GPS／SINS组合导航计算的可行性。     

束丝SiC纤维增强铝复合材料界面TEM研究

利用透射电镜 (TEM )对由几种不同方法制备的束丝SiC纤维增强铝复合材料 (包括超声液相浸渗法制备的复合丝、由复合丝热压得到的板材以及由真空液相压渗法制备的板材等 )的界面微观特征进行了研究 ,结果显示 ,制造态及 5 5 0℃× 1h热暴露条件下复合材料没有发生界面反应 ,在 6 5 0℃× 1h热暴露条件下有厚度 10 0～2 0 0nm的界面反应区。该研究表明 ,SiC/Al复合材料在制备工艺条件下具有有良好的界面化学相容性     

风扇转子叶片周向积叠的三维气动优化设计

为了研究优化环境对优化结果的影响，利用商业软件NUMECA对某风扇第一级转子叶片进行了气动优化设计，并对比研究了第一级转子单排叶片的优化及其在整级环境中的优化结果。研究发现．单叶排优化后．虽然能提高整级风扇的效率，但是由于匹配的原因，整级风扇在整个流量范围内总压比都比优化前的有所减小；在级环境中优化后，该级风扇的效率和稳定工作范围都扩大了，且保证了级压比不变，其优化效果比单叶排的优化效果好。     

基于遗传算法的飞机维修拆卸/装配序列规划研究

飞机维修拆卸/装配序列规划是整个飞机产品维修作业的重要组成部分,同时也是飞机远程诊断与远程维修的重要研究内容。针对飞机维修过程中拆卸/装配序列规划问题的特点和要求,本文从维修产品的拆卸/装配过程稳定性、拆卸/装配方向和拆卸/装配工具的改变次数三个方面来设置目标函数,解决了零件数量大的产品规划计算效率不高且没有考虑产品的维修过程稳定性问题。本文开发出了基于遗传算法的飞机维修拆卸/装配序列规划系统,并结合具体产品进行了验证。