An equilibrium multi-objective optimum design for non-circular clearance hole of disk with discrete variables

An Equilibrium Multi-objective Optimization Model(EMOM) with self-regulated weighting factors has been proposed for the optimum design of non-circular clearance hole on the front flange of turbine disk. In the ‘‘equilibrium design", both the stress decrease around the hole and the least hole's profile variation are considered, which balances two ambivalent design goals. Specific discrete variables are applied to realize the standardization design in the optimization process, in which a Surrogate Genetic Coding Algorithm(SGCA) is introduced, and a special check module is used to get rid of repeated fitness evaluation of the samples. The method offers an equilibrium design for the non-circular clearance hole of the turbine disk with great accuracy and efficiency.     

航天器视场遮挡分析方法研究

敏感器视场遮挡分析是航天器构型布局设计的重要组成部分，针对大型在轨变构型航天器敏感器视场遮挡分析工作量大、出错率高、遮挡率无法量化等特点，本文提出一种基于敏感器第一视角的视场遮挡快速分析方法。该方法通过设置第一视角图像蒙版及图像映射，模拟方锥形、圆锥形、球形等各类敏感器视场，通过逐个像素比对，计算视场遮挡率和遮挡方位。使用此方法建立了空间站敏感器视场遮挡分析系统，结果表明新方法能够显著提高视场遮挡分析效率和准确率，并且为机构类部件运动过程对敏感器视场遮挡的分析提供了有效工具。     

Application of small-size antennas for estimation of angles of arrival of HF signals scattered by ionospheric irregularities

A modification of the Doppler Interferometry Technique is suggested to enable estimating angles of arrival of comparatively broadband HF signals scattered by random irregularities of the ionospheric plasma with the use of small-size weakly directional antennas. The technique is based on the measurements of cross-spectra phases of the probe radiation recorded at least in three spatially separated points. The developed algorithm has been used to investigate the angular and frequency-time characteristics of HF signals propagating at frequencies above the maximum usable one (MUF) for the direct radio path Moscow-Kharkiv. The received signal spectra show presence of three families of spatial components attributed, respectively, to scattering by plasma irregularities near the middle point of the radio path, ground backscatter signals and scattering of the sounding signals by the intense plasma turbulence associated with auroral activations. It has been shown that the regions responsible for the formation of the third family components are located well inside the auroral oval. The drift velocity and direction of the auroral ionosphere plasma have been determined. The obtained estimates are consistent with the classical conception of the ionospheric plasma convection at high latitudes and do not contradict the results of investigations of the auroral ionosphere dynamics using the SuperDARN network.     

Is the phenology-based algorithm for mapping deciduous rubber plantations applicable in an emerging region of northern Laos?

Updated information of rubber plantations is essential for assessing socioeconomic and environmental impacts, especially in the emerging region of northern tropics. Here, a phenological method was modified to detect rubber plantations using Landsat Operational Land Imager (OLI) imagery in Phongsaly Province of northern Laos, where it begun a rubber boom in the mid-2000s due to geo-economic cooperation. It highlighted the landscape and pixel differences of deciduous rubber plantations in the tri-temporal phases (i.e., pre-defoliation, defoliation, and foliation) during the dry season due to phenological changes. Six commonly used vegetation indices (VIs), including the Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI), Land Surface Water Index (LSWI), Atmospherically Resistant Vegetation Index (ARVI), Normalized Burn Ratio (NBR and NBR2) derived from OLI imagery during 2013–2016 were compared to determine the most suitable VI for discriminating the phenological differences of rubber plantations from natural forests. Then, the Differences of Normalized Burn Ratio (DNBR) was applied to generate the 30 m map of rubber plantations in 2016, by combining two masks of Landsat-derived forest and suitable elevation for rubber trees cultivation. The resultant map of rubber plantations had a classification accuracy of 93.7% and the Kappa coefficient of 0.848. Our study demonstrated the usefulness of the Landsat-derived tri-temporal phenological DNBR approach in an emerging region of northern Laos, despite requiring more scenes compared with single- and double temporal window methods.     

飞机重心位置的计算分析方法

飞机重心位置对飞机的安定性和操纵性影响很大.不在飞机重心允许范围内装货或载客时,会使飞机操纵性和安定性变差,影响飞行安全.飞机重心位置计算分析是新型飞机研制、现役飞机加改(换)装设计等工程中必不可少的一个重要环节.以某型现役飞机进口短波单边带电台换装国产短波自适应/跳频电台工程作为研究对象,研究了基于力矩平衡法的飞机重心位置计算方法,计算了该型飞机换装短波电台后空机重心位置.计算结果表明,该型飞机进口短波电台换装国产短波电台后,空机状态下的重心位置满足重心允许范围要求.     

PWM变频器供电的感应电机传热特性

为了探究电动机在脉宽调(Pulse width modulation，PWM)变频器供电下的传热特性，近一步揭示变频参数（调制比）对电动机温升分 布的影响特征,以一台采用PWM变频器供电下55 kW驱动用感应电机为例，基于流体力学及传热学基本原理，结合电机通风结构特征，建立外部包裹有空气域的三维流热耦合求解域模型，并采用有限体积元法对电机内的温度场进行了数值研究。此外，针对PWM不同调制比控制条件下电动机全域内的传热特性进行了对比分析，结果表明：两个不同调制比控制条件下电机求解域 内各主要部件温升分布趋势大致相同；径向上，转子部分温升较高，在气隙位置温升出现阶跃式变化，定子部分温升较低；轴向上，电机各部分近风端温升较低，远风端温升较高；周向上，定子轭部温升呈波浪式变化。     

一种基于余代数单子的Web服务形式化模型

为拓展服务计算的形式化研究视野、手段和方法，建立并实现了一种针对Web服务的服务计算形式化模型。鉴于开放环境下的服务实体主要来源于不同的第三方提供者，将软件实体抽象成余代数单子，从而以一种黑盒方式给出软件服务的语义模型。给出了余代数单子的一般性定义，在此基础上对软件服务进行单子描述，进而提出一种基于余代数方法和单子技术的Web服务参考模型。最后，实现了一个基于单子的Web服务计算平台原型系统，可支持从遗留系统中进行服务抽取、发布、发现和度量等。     

新一代机载悬挂物管理系统需求分析

针对当前悬挂物管理系统的局限性,结合国外先进战机悬挂物管理系统功能,对我国下一代机载悬挂物管理系统需求进行分析,从FC总线技术、开放式系统架构、多挂点混挂技术、悬挂发射装置控制技术、武器数据链技术5个方面进行了具体的描述,为悬挂物管理系统设计指明了方向.     

Plastic wrinkling prediction in thin-walled part forming process:A review

The precision forming of thin-walled components has been urgently needed in aviation and aerospace field. However, the wrinkling induced by the compressive instability is one of the major defects in thin-walled part forming. The initiation and growth of the wrinkles are interac-tively affected by many factors such as stress states, mechanical properties of the material, geometry of the workpiece and boundary conditions. Especially when the forming process involves compli-cated boundary conditions such as multi-dies constrains, the perturbation of clearances between workpiece and dies and the contact conditions changing in time and space, etc., the predication of the wrinkling is further complicated. In this paper, the current prediction methods were summa-rized including the static equilibrium method, the energy method, the initial imperfection method, the eigenvalue buckling analysis method, the static-implicit finite element method and the dynamic-explicit finite element method. Then, a systematical comparison and summary of these methods in terms of their advantages and limitations are presented. By using a combination of explicit FE method, initial imperfection and energy conservation, a hybrid method is recommended to predict plastic wrinkling in thin-walled part forming. Finally, considering the urgent requirements of com-plex thin-walled structures’ part in aviation and aerospace field, the trends and challenges in wrin-kling prediction under complicated boundary conditions are presented.     

基于经验模分解的PPP时间比对数据消噪方法

精密单点定位(PPP)时间比对数据会受到观测噪声的影响，因此对时间比对数据进行消噪是一项重要工作。提出一种基于经验模分解(EMD)的PPP时间比对数据消噪方法，并将该方法与Vondrak滤波方法的消噪效果进行对比。结果表明，两种方法的消噪效果相当，均能有效滤除PPP时间比对数据中的随机噪声，明显改善时间比对的稳定度。