基于磁路法与等效热网络法的航天 永磁同步电机设计与仿真

针对航天永磁同步电机方案初步设计耗时长、过度依赖商业软件的问题，基于磁路法和热网络法，提出了一套方案设计阶段航天永磁同步电机磁热性能快速预估与仿真方法。给出了定子内径、定子外径、铁芯长度、匝数等关键参数的取值准则，建立了包含36个节点集总参数热网络模型，并以端部绕组为例给出了热平衡方程的详细推导过程。通过与成熟商业软件对比，其电磁计算最大误差出现在电流有效值上，偏差值为607%；与样机实测值对比，绕组温升最大误差为73%，满足方案设计阶段预示精度要求，为方案设计阶段航天永磁同步电机快速性能预估提供有力支撑。     

多个空间高斯源信号情况下成组三维图像特征提取方法

针对功能磁共振成像数据中含有多个高斯信号源的盲源分离问题,介绍了一种成组典型相关分析方法(Group BSS-CCA)。这个方法的组分析框架参照了GIFT工具箱中的Group ICA算法,具体的典型相关分析方法应用的是Friman等人提出的BSS-CCA算法。以验证该方法的有效性为目的,设计了仿真实验;结果表明,该方法能较好识别出混合在人脑功能磁共振成像数据的2个空间高斯信号。Group BSS-CCA算法对研究人脑的功能磁共振成像数据具有较高的实用价值。     

飞机侧向波束导引控制系统结构方案及仿真

侧向波束导引控制系统是飞机在自动着陆时所采用的一种重要无线电波束导引系统。分析了侧向波束导引控制系统原理,基于飞机协调控制,构建一种侧向波束导引控制系统结构方案,在 MATLAB平台下,对所设计的侧向波束导引控制系统进行大量仿真研究。仿真结果显示,所设计的侧向波束导引控制系统结构是合理的,当其侧向耦合器结构参数设置准确时,可很好地改善导引控制系统的稳定性及动态品质。     

航空发动机磁力密封设计与试验研究

简要介绍了磁力端面密封的工作原理,研究了这种密封的设计要点及上进行了性能、耐久性及寿命试验.试验结果表明,磁力端面密封具有密封性能优异、寿命长等优点,基本能够满足某型发动机研制的需要.     

基于等离子体磁壳的行星探测器制动机理研究

等离子体磁壳制动技术是一种新型的行星探测器制动手段，具有制动阻力可调、可靠性高、结构质量小等优势，具有潜在的应用前景。开展了等离子体磁壳制动产生方式与工作机理的数值仿真研究。首先，以火星探测器的制动为背景，将等离子体磁壳简化为圆柱构型，建立了等离子体磁壳宏观模型，得到了制动阻力、有效捕获面积和探测器速度随轨道高度的变化关系。随后以等离子体磁壳中离子、电子和次中性粒子之间的相互作用为研究对象，建立了等离子体磁壳微观模型，获得了等离子体粒子数密度和温度随时间变化的规律。微观模型与宏观模型计算出的制动阻力一致，验证了两种模型的有效性。     

Static magnetic field analysis of hollow-cup motor model and bow-shaped permanent magnet design

The hollow-cup Permanent Magnet (PM) motors have the characteristics of low power consumption, and are widely used in the aerospace field. At present, the tile-shaped PMs used by hollow-cup PM motors have poor sinusoidal characteristics of the air gap magnetic flux density waveform, which will cause torque ripple. The existing method for improving the air gap magnetic flux density waveform is not very effective when applied to hollow cup, a special motor with no stator core and large air gap. A bow-shaped PMs structure is designed for the hollow-cup motor in this paper. First, the equivalent surface current method is used to calculate the analytical formula of the static magnetic field of the model. Then, the Finite Element (FE) method is used to calculate the static air gap flux density waveform of conventional tile-shaped PMs and bow-shaped PMs with different bow heights, and the corresponding harmonics and sine distortion are obtained by Fourier decomposition. The simulation results show that the bow-shaped PMs can effectively improve the sinusoidal characteristics of the static air gap flux density waveform. And the suitable bow height is determined. Finally, a prototype is made based on the suitable bow height for experiments, and compared with the analytical result and the FE result, and the accuracy and effectiveness of the bow-shaped PMs with the suitable bow height are verified.     

A multi-parameter model of heat treatment process for soft magnetic materials on performance of HSERs

Material properties play an important role in the performance of electromagnetic mechanism. For an aeronautic Hermetically-Sealed Electromagnetic Relay (HSER), more than 50% parts are made of soft magnetic materials. Therefore, the performance of soft magnetic materials directly determines the static and dynamic characteristics of the HSER. Based on the theory of crystal recrystallization, this paper analyzes cold extrusion and heat treatment in the processing of soft magnetic materials, simulates the grain change process of an armature at different heat treatment temperatures, establishes a correlation model of temperature, grain size, and magnetic energy, and verifies results by scanning electron microscopy. Results of heat treatment temperatures from 800 °C to 920 °C are obtained and compared. A sample soft magnetic material after heat treatment at different temperatures has the largest difference in the initial magnetization range, up to 22%. In order to verify the fluctuation of the overall output characteristics of an HSER caused by the difference between soft magnetic materials, a static and dynamic analysis model of a typical HSER is established, and the accuracy of the model is verified by a set of actual test system. The difference of dynamic characteristics under different heat treatment temperatures is nearly 3%.     

航空发动机热电偶传感器稳态测温偏差分析

为了满足航空发动机上高温、高压、高来流马赫数的恶劣工作环境下的使用需求，对某型航空发动机上选用的低压涡轮后热电偶传感器开展热风洞校准试验及测温准确性分析,明确热电偶传感器测温偏差的影响因素，并通过一种基于表面传热系数推导公式的测温偏差修正方法对校准结果进行计算验证，结果表明，计算方法合理可行，计算结果与测量结果一致性良好，在全部试验点偏差量均小于0.6%。针对现有校准设备无法完全模拟航空发动机真实工况的问题，对校准结果进行修正计算，修正计算结果与真实气流温度偏差在0.7%以内，传感器的稳态测温偏差能够满足在该型航空发动机上的使用需求。