基于μ分析的高超声速飞行器再入轨迹评估

为解决高超声速飞行器再入过程中存在的不确定性问题,将μ分析理论应用到标称再入轨迹的评估中.采用线性稳定储备准则,在密度、升力系数和阻力系数存在不确定性时,对标称轨迹在制导律下的制导稳定性进行了分析;根据所获得的最坏参数组合,采用系统的开环尼克尔斯曲线验证了μ分析的结果;分析了系统所能容纳的最大不确定性参数,并研究了系统对不同不确定性参数的敏感性.结果表明:在密度、升力系数和阻力系数不确定性中,阻力系数对该标称轨迹的鲁棒稳定性影响最为明显.     

基于线性规划的多操纵面重构控制研究

为实现多操纵面飞机的重构控制,提高飞机飞行的安全性能,提出了一种基于线性规划的多操纵面重构控制策略.针对操纵面卡死、松浮、损伤等典型故障情况,推导了相应的重构分配器,通过基于线性规划的直接分配方法来实现在操纵面故障下的重构控制.仿真结果表明,该控制策略能有效处理典型操纵面故障,发生故障时仍能快速跟踪控制指令,保证较好的...     

Multi-state autonomous drilling for lunar exploration

Due to the lack of information of subsurface lunar regolith stratification which varies along depth, the drilling device may encounter lunar soil and lunar rock randomly in the drilling process. To meet the load safety requirements of unmanned sampling mission under limited orbital resources, the control strategy of autonomous drilling should adapt to the indeterminable lunar environments. Based on the analysis of two types of typical drilling media (i.e., lunar soil and lunar rock), this paper proposes a multi-state control strategy for autonomous lunar drilling. To represent the working circumstances in the lunar subsurface and reduce the complexity of the control algo-rithm, lunar drilling process was categorized into three drilling states:the interface detection, initi-ation of drilling parameters for recognition and drilling medium recognition. Support vector machine (SVM) and continuous wavelet transform were employed for the online recognition of dril-ling media and interface, respectively. Finite state machine was utilized to control the transition among different drilling states. To verify the effectiveness of the multi-state control strategy, drilling experiments were implemented with multi-layered drilling media constructed by lunar soil simulant and lunar rock simulant. The results reveal that the multi-state control method is capable of detect-ing drilling state variation and adjusting drilling parameters timely under vibration interferences. The multi-state control method provides a feasible reference for the control of extraterrestrial autonomous drilling.     

Relay selection in cooperative communication systems over continuous time-varying fading channel

In this paper, we study relay selection under outdated channel state information (CSI) in a decode-and-forward (DF) cooperative system. Unlike previous researches on cooperative commu-nication under outdated CSI, we consider that the channel varies continuously over time, i.e., the channel not only changes between relay selection and data transmission but also changes during data transmission. Thus the level of accuracy of the CSI used in relay selection degrades with data transmission. We first evaluate the packet error rate (PER) of the cooperative system under contin-uous time-varying fading channel, and find that the PER performance deteriorates more seriously under continuous time-varying fading channel than when the channel is assumed to be constant during data transmission. Then, we propose a repeated relay selection (RRS) strategy to improve the PER performance, in which the forwarded data is divided into multiple segments and relay is reselected before the transmission of each segment based on the updated CSI. Finally, we propose a combined relay selection (CRS) strategy which takes advantage of three different relay selection strategies to further mitigate the impact of outdated CSI.     

Luenberger观测器在永磁同步电机无传感器控制中的应用研究

在永磁同步电机(PMSM)矢量控制中,根据Luenberger观测器原理,提出了一种基于Luenberger观测器的PMSM转子速度和位置的估算方法,有效解决了PMSM由于机械传感器安装带来的一些弊端。利用MATLAB/Simulink工具搭建控制系统仿真模型并进行仿真验证,仿真结果表明控制系统具有良好的控制性能。最后,在以STM32F103ZET6为控制核心的硬件系统上进行算法的实现,试验结果表明基于Luenberger观测器的PMSM控制系统具有较高的控制精度且稳定性较好。     

中国上市公司收入分配与所有权结构的实证分析

从公司收入分配角度研究不同所有权性质公司的企业利益和员工利益,研究发现不同所有权结构的企业生产效率差异不大,私有企业的企业利益优于国有企业,国有相对控股企业和私有相对控股企业的企业利益与员工利益相对较好,混合制企业的生产效率可能较低,企业利益与员工利益也相对较差.没有发现支持国有控股企业有大量冗员的证据,国企改革取得部分成功.     

开孔变刚度层合板压缩屈曲性能研究

针对开孔变刚度层合板,建立3种尺寸的层合板有限元模型,采用了线性屈曲、引入残余热应力的线性屈曲和引入初始缺陷的非线性屈曲的3种分析方法,研究了开孔层合板在压缩条件下的屈曲行为,并通过自动铺丝制造层合板进行试验对比,对3种方法的合理性进行了分析。结果表明,引入残余热应力的线性屈曲分析方法与试验结果最吻合,两者仅相差0.63%。基于该方法,讨论开孔层合板残余热应力分布特点和应力水平,得出了开孔层合板的应力分布云图和应力分布规律,计算出残余热应力对开孔复合材料层合的屈曲影响。结果表明,残余热应力对传统直线开孔层合板的屈曲载荷影响很小,仅提高了3.57%,但大大提高了变刚度开孔层合板的屈曲载荷,最多可达23.40%。说明纤维曲线铺放可以改变内部残余热应力的分布,提高整个开孔层合板承载压缩载荷的能力。     

Spectroscopy peculiarities of thermal plasma of electric arc discharge between electrodes with Zn admixtures

Plasma of the free burning electric arc between Ag–SnO₂–ZnO composite electrodes as well as brass electrodes were investigated. The plasma temperature distributions were obtained by Boltzmann plot method involving Cu I, Ag I or Zn I spectral line emissions. The electron density distributions were obtained from the width and from absolute intensity of spectral lines. The laser absorption spectroscopy was used for measurement of copper atom concentration in plasma. Plasma equilibrium composition was calculated using two independent groups of experimental values (temperature and copper atom concentration, temperature and electron density). It was found that plasma of the free burning electric arc between brass electrodes is in local thermodynamical equilibrium. The experimental verification of the spectroscopic data of Zn I spectral lines was carried out.     

基于自适应容积粒子滤波的车辆状态估计

针对车辆状态估计中由模型的强非线性、噪声的非高斯分布等相关因素导致估计精度下降甚至发散的问题,本文提出了基于自适应容积粒子滤波(Adaptive cubature particle filter,ACPF)的车辆状态估计器。首先基于非稳态动态轮胎模型,构建高维度非线性八自由度车辆模型。其次利用自适应容积卡尔曼滤波(Adaptive cubature Kalman filter,ACKF)算法更新基本粒子滤波(Particle filter,PF)算法的重要性密度函数,以完成自适应容积粒子滤波算法设计。利用车载传感器信息,运用ACPF算法实现对车辆的侧倾角、质心侧偏角等关键状态变量高精度在线观测。搭建Simulink-Carsim联合仿真平台进行了算法的验证,结果表明该算法状态估计精度高于传统无迹粒子滤波(Unscented particle filter,UPF)算法,且算法运算效率高于UPF算法,而传统PF估计值发散。研究结果为实现车辆动力学精准控制提供了理论支持。     

基于L1范数的k平面聚类算法设计

基于L2范数度量的k平面聚类(k-Plane Clustering,k PC)设计思想,本文提出了一种采用L1范数度量的聚类算法。由于在平面更新步骤中,所导出的优化问题是非凸的,文中给出了一种求解方法,即将非凸问题转化为有限个子集上的凸问题,为避免求解多个优化问题导致训练时间过长问题,本文还设计了一种新的优选策略,有限个子集的搜索任务可在线性时间内完成。本文所提出的方法只需要求解k个线性规划,而不再是k PC的求解特征值问题。在人工和UCI数据集上的实验结果表明:基于L1范数平面聚类算法的训练和测试时间更短,且在大多数数据集上均表现出了更好的聚类性能。