基于准三维冰形算法的结冰预测技术及应用研究

机翼结冰是威胁民用飞机飞行安全的主要因素之一,准确预测机翼的结冰过程和特点,可为防除冰设计提供依据和支撑。提出了利用二维模拟三维的准三维冰形算法,该算法在保证结冰预测精度的同时,极大地降低了型号结冰计算成本;给出了顺气流和垂直于前缘两种典型民用飞机后掠翼机翼的二维剖面截取方法,并将采用该方法的计算结果与三维后掠机翼的结冰预测结果进行了对比分析。结果表明,相对于顺气流方式,垂直于前缘方式的准三维冰形算法与三维后掠机翼的结果更为接近。     

大航向角误差情况下飞行中对准研究

为了解决飞行器在大航向角误差的情况下进行飞行中对准的难题,将一种线性大航向角误差模型应用于飞行器飞行中对准的过程.详细推导了线性大航向角误差模型,设计了飞行器在大航向角误差情况下进行飞行中对准的卡尔曼滤波模型,并进行了数字仿真.仿真结果表明,线性大航向角误差模型应用于飞行器飞行中对准,能够很好地解决飞行器在大航向角误差情况下进行对准的难点,并给出了适合于大航向角误差模型的机动方式.最后,提出了线性大航向角误差模型在工程应用中的几点建议     

非对称变翼飞行器复合控制系统设计

针对非对称变翼飞行器的姿态控制问题，提出了一种复合控制系统的设计方法。基于非对称变翼的姿态动力学模型，将变翼作为一种主动控制方式，提出了非对称变翼的使用条件，并采用逻辑函数设计了气动舵和变翼的复合控制分配策略。利用扩张干扰观测器估计了变翼过程中的扰动，采用全局滑动模态的变结构控制方法，设计了姿态复合控制系统，抑制了变形过程中参数的剧烈变化和变形引起的附加扰动。通过仿真，一方面与固定翼飞行器对比，校验了非对称变翼控制的有效性；另一方面通过气动数据的正负拉偏，验证了控制器对气动参数的摄动有良好的鲁棒性。     

飞翼布局无人机变形机翼设计与模型验证研究

对飞翼布局无人机变形机翼和变形机翼传动机构进行了设计,根据设计结果制作验证模型进行风洞实验和外场飞行试验,以此研究伸缩段机翼对飞行器机翼整体气动性能的影响。结果表明:采用变形机翼技术,可以通过实时控制机翼的气动外形保持较高的气动效率,提高飞机在巡航状态下的升力和高速飞行状态下的机动性,满足飞机在各种任务剖面的战术性能要求。     

基于代理模型的大型民机机翼气动优化设计

先进的气动优化设计思想与方法，对于提升大型民机气动与综合性能具有至关重要的意义。探讨了大型民机超临界机翼气动优化设计的基本准则和要点，并结合代理优化算法，提出了一种面向工程应用的多轮次高效全局气动优化设计方法。首先，通过一系列解析函数/翼型/机翼优化测试算例进行了验证。其次，将所提出的方法与人工修型相结合，开展了针对宽体客机超临界机翼的两轮气动优化设计，使其气动性能得到显著改善。最后，采用不同的雷诺平均Navier-Stokes（RANS）方程求解器对安装优化机翼的全机巡航构型进行了典型状态的气动性能综合评估。研究结果表明，所提出的代理优化算法具有很高的优化效率、较强的约束处理和全局优化能力；将所发展的基于代理模型的多轮次气动优化设计方法与人工修型相结合，能够获得满足设计要求的气动外形，验证了该方法在大型民机超临界机翼气动设计中的有效性和工程实用性。     

Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces

With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

矩形橡胶复合材料层合板的大变形研究

本文应用Ｋｉｒｃｈｈｏｆｆ假设和ＶｏｎＫａｒｍａｎ理论对正交各向异性的矩形橡胶复合材料层合板进行了几何非线性分析。与线性结果相比，大变形理论所得结果更具准确性。     

大后掠机翼翼尖导弹动力响应空测与数据分析

 <正> 大后掠机翼翼尖挂导弹对外界干扰的动力响应很灵敏,这种干扰主要来自随机不稳定气流或各种突加载荷。为保证安全和防止导弹失控,摸清其响应值非常必要;除理论计算外,对可能遇到的不平稳气流和突加载荷在翼尖导弹上的动力响应进行了空测,并用频谱分析和功率谱密度分析处理了空测数据,制订了翼尖导弹振动与冲击试验谱,进行了地面试验与空中打靶试验,获得了满意结果。     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.