高速飞行器热结构工作时变模态参数辨识

高速飞行器由于其很高的飞行速度而无可避免地受到气动加热作用的影响,进而引起结构特性的时变。采用理论或有限元方法(FEM)进行数值分析,难以获取反映结构在飞行(工作)状态下的真实模态参数。通过辨识获取高速飞行器热环境下的时变结构模态参数是一项十分具有挑战性的任务。针对此问题,引入参数化时频域的最大似然方法,对气动加热作用下的高速飞行器升力面结构的时变模态参数进行了辨识。通过模拟真实飞行状态的数值算例研究,说明参数化时频域的最大似然方法能够很好地辨识出低信噪比(SNR)情况下的模态频率和模态振型,验证了参数化时频域最大似然方法适用于具有显著时变特征的高速飞行器热结构的时变结构模态参数辨识,可为将来相关的工程研究和应用提供良好的理论支持。     

大型客机一体化试飞改装设计方法研究

研究了大型客机试飞改装的要求和特点,提出了一体化试飞改装的设计方法,结合其在型号研制过程中的具体应用情况,具体阐述了一体化改装设计的方法及关键技术点。     

延误航班停机坪作业运行控制研究

随着航班航次的增加，机场变得越来越繁忙．地面作业操作不当所导致的飞机地面事故日益增加：在介绍航班停机坪作业的基础上，分析了地面作业的特点，在此基础上，根据航班延误时在作业资源充足和不足情况下，研究了航班停机坪作业的一般方法。在资源充足情况下，航班延误的地面作业控制主要采用AOE方法，缩短关键路线的作业时间。而资源不足情况下，除了控制关键路线作业时间外，还要根据排序算法合理分配关键作业的资源，以实现缩短延误时间的目的。     

大芯径大数值孔径光纤测试系统测量不确定度评定

简述了大芯径大数值孔径光纤测试系统的测量原理，建立了测试系统的数学模型并对该系统的测量不确定度进行了评定。     

高精度高速走丝线切割机床大锥度机构的实现

设计了一种具有导丝器机构的高精度高速走丝线切割大锥度线架结构,以期提高高速走丝电火花线切割大锥度切割及多次切割精度。     

含纳米金属粉的推进剂点火实验及燃烧性能研究

利用CO2激光点火系统对含有纳米铝粉和纳米镍粉的AP／HTPB推进剂进行激光点火实验,测量了推进剂在不同激光功率和压强下的点火延迟时间,对推进剂的燃速、常压点火温度和爆热也进行了测量。同时,利用氧化还原滴定法测定燃烧残渣中活性铝含量。结果表明,纳米铝粉(n—Al)的点火阀值比普通铝粉(g-A1)的点火阀值小几个数量级,加入纳米铝粉可有效地缩短推进剂点火延迟时间。而在纳米镍粉为催化剂的协同作用下,推进剂燃速明显提高,点火延迟时间也大大减少,Al在推进剂燃烧过程中的燃烧效率得以提高,同时燃烧残渣中活性铝含量也明显降低。     

45°(N)纬度带的Klobuchar like电离层延迟季节修正模型与评估

电离层延迟是全球卫星导航系统（GNSS）的主要误差源之一。对于装配GNSS单频接收机的航空器,选择简单有效的Klobuchar广播电离层模型来改正电离层延迟误差,其修正率为50%～60%。针对45°（N）纬度带,提出了更高电离层修正需求。考虑到季节因素对中高纬度地区电离层的显著影响,利用GIMs（Global Ionospheric Maps）分析了昼夜中TEC（Total Electron Content）的峰值和谷值随季节（年积日）的变化,建立了一种适用于45°（N）纬度带的Klobuchar like电离层模型。该模型不增加广播模型系数,新模型的夜间和VTEC高峰时电离层修正率分别达到了82%和80%,表明在穿刺点集中的45°(N)纬度地区使用该模型可以更精确地描述该地区的电离层,帮助航空器实现更高精度的定位。     

Establishment of atmospheric weighted mean temperature model in the polar regions

Due to the special geographical location and extreme climate environment, the polar regions (Antarctic and Arctic) have an important impact on global climate change. Atmospheric weighted mean temperature (Tm) is a crucial parameter in the retrieval of precipitable water vapor (PWV) from the zenith wet delay (ZWD) of ground-based Global Navigation Satellite System (GNSS) signal propagation. In this paper, the correlation between weighted mean temperature and surface temperature (Ts) is studied firstly. It is shown that the correlation coefficients between Tm and Ts are 0.93 in the Antarctic and 0.94 in the Arctic. The linear regression Tm model and quadratic function Tm model of the Antarctic and the Arctic are established respectively using the radiosonde profiles of 12 stations in the Antarctic and 58 stations in the Arctic from 2008 to 2015. The accuracies of the linear regression Tm model, the quadratic function Tm model and GPT2w Tm model which is a state-of-the-art global Tm model are verified using the radiosonde profiles from 2016 to 2018 in the Antarctic and Arctic. Root Mean Square (RMS) errors of the linear regression Tm model, the quadratic function Tm model and GPT2w Tm model in the Antarctic are 3.07 K, 2.87 K and 4.32 K respectively, and those in the Arctic are 3.53 K, 3.38 K and 4.82 K, which indicates that the quadratic function Tm model has a higher accuracy compared to linear regression Tm model, and the accuracies of the two regional Tm models are better than that of GPT2w Tm model in the polar regions. In order to better evaluate the accuracy of Tm in the PWV retrieval, the PWV values of radiosondes are used for comparisons as the reference value. The RMS errors of PWV derived from the two Tm models are similar for 1.28 mm in the Antarctic and 1 mm in the Arctic respectively. In addition, the spatial and temporal variation characteristics of Tm are analyzed in the polar regions by spectral analysis of Tm data using fast Fourier transform. The results show that the Tm has obvious seasonality and annual periodicity in the polar regions, and the maximum difference between warm season and cold season is about 63 K. After comparing and analyzing the influences of latitude, longitude and elevation on the Tm in the polar regions, it is found that latitude and elevation have a greater influence on the Tm than the longitude. As the latitude and elevation increase, the Tm decreases, and vice versa in the polar regions.     

Maximal admissible mode decision delay in terminal guidance

Mode decision-maker is a critical component in the logic-based Integrated Estimation and Guidance(IEG) system. For the best possible estimation and guidance performance, the mode decision delay of the mode decision-maker should be limited to a range as small as possible. This paper presents a numerical method for computing the maximal admissible mode decision delay that varies with time-to-go. Particular attention has been paid to highly maneuvering target interception in terminal guidance. The results of this research offer useful guidelines for the design of the mode decision-maker in IEG systems.     

翼身融合运输机分布式电推进系统设计及油耗评估

针对翼身融合运输机开展了分布式电推进系统的总体设计与油耗评估。通过数值计算完成了70t载质量翼身融合飞机的气动设计与优化。在巡航马赫数为0.80和10km高度的设计点,最大升阻比达到了24。通过求解积分边界层方程组,完成了电推进系统的总体设计。电推进系统包含10个推进风扇,风扇直径为1.45m，压比为1.35，巡航功率为2.94MW。建立了考虑燃烧过程的发动机一维性能模型,对发动机油耗进行了评估,获得了不同发动机循环参数下燃油消耗。建模结果表明,基于翼身融合布局和分布式电推进技术,可使运输机的油耗较C-17节省近50%。