基于盲源分离的雷达信号欺骗干扰抑制

针对脉冲压缩信号的频谱弥散(SMSP)干扰,通过分析其时频特性,提出了一种基于盲分离的抑制算法。首先,推导了基于独立分量分析的代价函数,由于代价函数中信号概率密度函数不能精确估计,利用信号高阶互累积量的性质,重新构造了一种新的代价函数;其次,利用基于自然梯度的方法对新代价函数进行优化,从而得到基于峭度的盲分离算法;最后,通过仿真证明,对比Fast ICA算法,文中算法具有更快的收敛速度和更好的分离性能,在保证分离精度的前提下,可成功将目标回波信号分离,达到SMSP干扰抑制的目的。     

基于充气前缘技术的旋翼翼型动态失速抑制

动态失速的发生会在直升机旋翼桨叶和桨毂上产生高的交变扭转振动载荷,并限制直升机高速重载状态下的使用包线。本文利用计算流体力学(CFD)方法对基于充气前缘(ILE)技术的SC1095旋翼翼型动态失速抑制进行研究,分析了ILE抑制动态失速的控制机理,获得了ILE结构布置和充放气方式对动态失速的影响规律。研究表明:ILE可以有效抑制动态失速的发生;ILE最大膨胀程度越大,其抑制动态失速的效果越好,但膨胀程度过大后抑制效果开始减弱;ILE在翼型上仰至最大迎角时恰好达到最大膨胀状态,其对动态失速的抑制效果最好;ILE保持最大膨胀状态的时间长短对抑制效果影响不大;在翼型上仰至不同迎角时开始对ILE充气会对动态失速抑制有较大影响;ILE整流段与翼型连接位置对动态失速抑制有很大影响,整流段越长,抑制效果越好。     

航天飞机系统两体分离问题的探讨

本文简要地叙述了美国研究轨道器与外挂贮油箱,轨道器与载机分离问题的概况。对垂直起飞两级入轨的并联两机的分离问题,提出了研究模型并作了具体分析,着重提出了实现两机安全分离需要解决的技术难点。 二级航天飞机的两机分离问题,是未来航天高技术领域的关键技术之一,本文阐述了解决两体并联分离问题我国现有的技术水平,并提出了解决该问题的技术方案。     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

基于2D-LDV技术的船舶螺旋桨三维流场结构分析(英文)

利用2D-LDV设备,通过优化布置测试点,获得了均匀来流下螺旋桨尾流场三维流动数据。展示了宏观的流场动态以及微观的流动信息,如尾涡和梢涡在流场中的分布情况、尾涡部流动的剪切效应、梢涡部的绕流及流动分离状态。计算了水动力螺距角以及螺旋桨附着涡的总环量。试验显示了LDV技术在流动细节测试方面的优势,获得的定量信息可以为相关研究人员提供技术支持。     

一种折叠弹翼悬挂物的分离轨迹试验技术

提出了一种新的折叠弹翼悬挂物机弹分离轨迹试验技术,重点解决了在机弹分离过程中折叠弹翼动态展开时悬挂物的气动力获取问题。研究表明,提出的试验技术通过将悬挂物气动力修正方法引入到悬挂物分离安全性研究当中,准确地得到悬挂物的分离特性,解决了折叠弹翼悬挂物分离轨迹风洞试验技术瓶颈,为折叠弹翼悬挂物的投放分离安全性提供一套工程实用的解决方案。     

基于EFFD方法的自然层流短舱优化设计

采用extended free-form deformation(EFFD)方法研究了自然层流(natural laminar flow,NLF)短舱的气动外形优化设计方法.使用基于Bernstein基函数的EFFD方法完成了NLF短舱剖面的参数化,利用基于k-εSST(shear stress transport)两方程湍流模型的γ-θ转捩模型进行自然转捩预测,结合EFFD、一种混合动网格方法、Kriging代理模型和改进的粒子群算法(particle swarm optimization,PSO)建立了针对NLF短舱气动外形的优化设计框架.采用该框架分别对通气NLF短舱和带动力NLF短舱进行优化设计.单独通气NLF短舱优化结果的外表面实现48%的层流,阻力系数比初始通气NLF短舱减小了0.0003.带动力NLF短舱的优化结果外表面保持了41%的层流.这些结果表明采用相关技术建立的优化设计框架在NLF短舱设计中具有一定应用价值.     

单扇区管制移交间隔管理模型和算法研究

针对区域管制移交间隔管理问题进行研究,通过分析当前的流量管理模型和算法,提出单个扇区管制移交间隔管理模型。在研究中,引入间隔矩阵概念,以指定时段内的延误控制为目标,分析扇区容量和管制移交高度层选择等限制因素,建立数学模型,并通过间隔增量矩阵的使用来优化算法。算例中采用在国内某区域管制范围内的繁忙时段数据进行了分析和验证。     

大长径比圆截面隔离段流场的数值研究

对2 Ma均匀来流条件下大长径比L/D=17.5的等直圆截面隔离段内流场进行了数值模拟.研究了在不同背压和不同壁面粗糙度的条件下,隔离段内激波串形态、静压分布、总压恢复.结果表明:激波串位置与背压呈非线性关系,激波串中形成数道“X”形的激波,总压恢复系数随背压增加先减小后增大;壁面粗糙度增加会使激波串前的壁面压力有所增加,使激波串向上游移动,激波串的第一道激波强度增大,之后的激波强度迅速衰减.