带栅格翼导弹超声速阶段滚转阻尼导数的数值研究

滚转阻尼导数是判断导弹动稳定性的重要气动参数。采用求解定常流场的方法,对超声速阶段平板翼翼身组合体和栅格翼翼身组合体的滚转特性进行数值模拟,并与平板翼翼身组合体的实验数据相比,符合较好。计算结果表明,栅格翼的滚转阻尼导数变化复杂,由于弹体背风面分离流和栅格翼翼面失速的影响,滚转阻尼导数随着攻角增加有两次明显转折;平板翼的滚转阻尼导数随着马赫数增加逐渐减小,而栅格翼的滚转阻尼导数随马赫数同样呈现两次转折,在Ma=3.5达到最大值。     

栅格翼电弧风洞试验的气动参数模拟方法研究

为验证栅格翼防热方案的有效性,针对栅格翼单片级试验件厚度过低无法直接测量试验件冷壁热流密度的难题,提出了一种直接模拟来流气动参数的栅格翼热防护试验设计方法,能够准确考核防热方案,对类似结构的热防护试验具有指导意义。     

不同尾翼灵巧子弹气动特性实验研究

从无伞灵巧子弹稳态扫描的必要条件出发,设计了轴向折叠和径向折叠两种尾翼类型的子弹气动外形。设计了模型和实验装置,进行了小迎角低速风洞实验。获得了模型在固定和旋转条件下的气动力数据,测量了模型在气动力作用下的转速,对模型的稳定性进行了分析。实验结果表明：模型采用轴向折叠尾翼,能够设计足够有效的迎风面积和增阻效果良好的翼面形状,维持较为稳定的转速,具有良好的旋转稳定性;采用径向折叠尾翼的模型,增阻效果不明显,稳定旋转能力较差。实验结果为无伞灵巧子弹的设计提供了重要参考。     

高超声速栅格翼气动特性研究

阐述了用于马赫数大于5.0的高超声速飞行控制的栅格翼气动特性问题。采用工程 计算方法预示了栅格翼气动力、热特性,验证了栅格翼几何参数特性合理选取的初步要求, 这为后续深入研究进行了有益的探索。
     

仿生机器鱼尾鳍拍动的控制算法

两关节尾鳍拍动控制是一个在高速、大载荷下的运动控制问题,它要求同时保证速度和位置波形失真都比较小.论证了尾鳍拍动推进方式与鱼体波动推进方式的一致性,根据尾鳍拍动的运动规律导出了用于拍动控制的数学模型.基于SPC-III机器鱼硬件平台,在主臂控制上,提出了根据摆角位置解算转速,并结合时间与摆角位置关系进行速度补偿的算法;在小臂控制上,提出了根据两关节摆角位置的关系及程序循环周期解算小臂目标位置的跟随算法.对高频拍动的实现进行了探讨.在试验中对尾鳍拍动的跟随性进行了验证.      

Nonlinear aeroelastic analysis of the folding fin with freeplay under thermal environment

The nonlinear aeroelastic behavior of a folding fin in supersonic flow is investigated in this paper. The finite element model of the fin is established and the deployable hinges are represented by three torsion springs with the freeplay nonlinearity. The aerodynamic grid point is assumed to be at the center of each aerodynamic box for simplicity. The aerodynamic governing equation is given by using the infinite plate spline method and the modified linear piston theory. An improved fixed-interface modal synthesis method, which can reduce the rigid connections at the interface, is developed to save the problem size and computation time. The uniform temperature field is applied to create the thermal environment. For the linear flutter analyses, the flutter speed increases first and then decreases with the rise of the hinge stiffness due to the change of the flutter coupling mechanism. For the nonlinear analyses, a larger freeplay angle results in a higher vibration divergent speed. Two different types of limit cycle oscillations and a multiperiodic motion are observed in the wide range of airspeed under the linear flutter boundary. The linear flutter speed shows a slight descend in the thermal environment, but the effect of the temperature on the vibration divergent speed is different under different hinge stiffnesses when there exists freeplay.     

热载与进口气流条件对柱肋通道换热的影响

目前关于燃气涡轮叶片冷却的实验研究多数是在常温常压进口气流和低壁温条件下进行的,而实际燃气涡轮叶片的冷却气流为来自于压气机的高温高压空气,且涡轮叶片壁面热载（定义为加热壁面壁温与冷却气流进口温度之比）很高。为了掌握热载与进口气流条件对于涡轮叶片尾缘内部冷却通道的冷却效果的影响,本文在考虑空气物性随温度变化的情况下,采用数值模拟方法进行了相关的计算和分析。计算选取了两种进口气流条件（常温常压、高温高压）,热载为1.1-1.9,进口气流雷诺数为5×103-1×105。计算结果表明,进口气流雷诺数一定的情况下,随着热载的增大,通道内换热能力降低,流动阻力系数增大;与常温常压进口气流条件相比,高温高压进口气流条件导致通道努塞尔数降低,并且努塞尔数在高热载条件的降低更为显著;在进口气流雷诺数为60000的条件下,高温高压进口气流、热载为1.9的条件下通道的努塞尔数比与常温常压进口气流条件、热载为1.1条件下通道的努塞尔数降低了15.8%,且随着进口气流雷诺数的提高,通道换热的削弱程度进一步增大。本文的研究表明,涡轮叶片的冷却设计必须考虑叶片冷却的实际条件,并对实验数据结果进行合理修正。     

Numerical studies of static aeroelastic effects on grid fin aerodynamic performances

The grid fin is an unconventional control surface used on missiles and rockets. Although aerodynamics of grid fin has been studied by many researchers, few considers the aeroelastic effects.In this paper, the static aeroelastic simulations are performed by the coupled viscous computational fluid dynamics with structural flexibility method in transonic and supersonic regimes. The developed coupling strategy including fluid–structure interpolation and volume mesh motion schemes is based on radial basis functions. Results are presented for a vertical and a horizontal grid fin mounted on a body. Horizontal fin results show that the deformed fin is swept backward and the axial force is increased. The deformations also induce the movement of center of pressure, causing the reduction and reversal in hinge moment for the transonic flow and the supersonic flow,respectively. For the vertical fin, the local effective incidences are increased due to the deformations so that the deformed normal force is greater than the original one. At high angles of attack, both the deformed and original normal forces experience a sudden reduction due to the interference of leeward separated vortices on the fin. Additionally, the increment in axial force is shown to correlate strongly with the increment in the square of normal force.     

液晶瞬态技术测量带侧向流扰流柱通道端壁换热

采用热色液晶瞬态测量技术测量带侧向流扰流柱通道端壁全表面换热系数的分布,研究了侧流比及雷诺数对换热的影响,其中,侧流比为0.25~1.0,雷诺数为3×104~9×104。结果表明:(1)侧流比对扰流柱通道的流动形态及端壁换热有重要影响;(2)存在一个临界侧流比,在临界侧流比以下,流动形态沿主流方向呈错排流状态;在临界侧流比以上,流动形态沿侧流方向呈错排流状态;在临界侧流比附近,流动为顺排流动状态,方向在主流和侧流方向之间;(3)侧流比较小或较大时,扰流柱通道端壁换热较强;在临界侧流比附近,换热相对较弱。     

矩形通道内扰流柱形状对流动和换热特性影响的研究

利用试验和数值模拟两种方法对装有圆形、椭圆形和水滴形三种叉排扰流柱阵列矩形通道内流动和换热过程进行了研究,获得了通道内流场、压力场以及壁面温度场的基本特征,并对其强化换热特性和压力损失特性进行了对比分析。结果表明:装有水滴形扰流柱阵列的矩形通道压力损失分别为前两者的51%和95%,而恒热流壁面的平均对流换热系数相对于前两者而言分别降低了20%和7.9%,压力损失降低的幅度明显高于强化换热的减弱。综合性能评估表明,水滴形扰流柱是一种具有较好综合性能、替代常规圆形扰流柱的理想结构。