Hi content in cluster and supercluster galaxies

In this lecture I review part of the published and unpublished observational evidence showing that cluster spiral galaxies are hydrogen deficient. Always using observational data, it is argued that the deficiency is due to the interaction between the galaxies and the intergalactic medium. Furthermore it is shown that the stellar population of deficient galaxies has also been affected and a brief discussion is given of the mechanisms at work.     

The structure and effects of cooling flows in clusters of galaxies

Rapidly cooling gas is commonly found near the centres of clusters of galaxies. The structure of the resulting gas flows is reviewed. Total gas cooling rates of several hundred M yr⁻¹ have been observed in a number of cases. Thermal instability and the ultimate fate of the cooled gas are discussed. The cooled gas could easily have formed a massive central galaxy.     

微纳聚合体卫星的对称式重构规划算法

为解决微纳聚合体卫星变构过程中，聚合体各部分之间的动力学耦合导致的卫星整体姿态翻转或紊乱，提出了一种对称式变构规划算法。首先建立了铰链约束下的漂浮基多刚体系统动力学模型，研究了重构过程中各运动模块对本体姿态的影响，提出当每两个运动模块位置与转动方向满足对称性条件时，两者对本体姿态的影响可在一定程度上相互抵消。基于上述理论，在A*算法中引入最优分配度量和对称性判定，设计了并行对称重构规划算法。仿真结果表明，该规划算法可实现重构过程中多模块并行、对称运动，重构过程总步数较少，运动模块对本体姿态的影响小。     

考虑燃料消耗均衡性的低轨通信星座在轨星座构型重构方法研究

针对低轨（low earth orbit,LEO）通信星座在轨重构问题，分析了低轨通信星座的特点，提出了4个重构指标，即全球平均覆盖率、燃料消耗均衡性、重构总时间和重构总速度增量，并分析了提高轨道高度的重构方式。采用基于分解的多目标进化算法（multiobjective evolutionary algorithm based on decomposition，MOEA/D）对重构进行建模分析。结果表明，模型优化结果可以得出多组最优解，构成帕累托前沿，并得出燃料消耗均衡性最优的解，针对两种失效模式得出的重构总时间均为3.6×105s，速度增量方差分别为261.4m2/s2和293.4m2/s2，这些解均可恢复星座原有的覆盖性能，并使燃料消耗最为均衡。     

Robust model predictive control for satellite formation keeping with eccentricity/inclination vector separation

This study presents model predictive formation control based on an eccentricity/inclination vector separation strategy. Alternative collision avoidance can be accomplished by using eccentricity/inclination vectors and adding a simple goal function term for optimization process. Real-time control is also achievable with model predictive controller based on convex formulation. Constraint-tightening approach is address as well improve robustness of the controller, and simulation results are presented to verify performance enhancement for the proposed approach.     

Spacecraft formation flying control around L2 sun-earth libration point using on–off SDRE approach

In this paper, on–off SDRE control approach is presented for spacecraft formation flying control around sun-earth L2 libration point. Orbits around libration points are significant targets for many space missions mainly because of efficient fuel consumption. Furthermore, less propellant usage can be achieved by considering optimal control approaches in spacecraft formation flying control design. Among various nonlinear and optimal control methods, SDRE has shown to be a popular controller in various missions due to the privileges including efficiency, accuracy and robustness. The spacecraft are assumed to have on–off thrusters as actuators. It requires them to be fed with a sequence of on–off pulses which is regarded as a challenge for spacecraft designers. Hence, the main contribution of this paper is designing an on–off SDRE approach for the formation flight around sun-earth L2 point with uncertainty with energy and accuracy considerations. Including on–off input as a constraint is not feasible for SDRE implementation because it makes the system non-affine. An alternative is utilizing an integral action technique and an auxiliary control to make the system affine which leads to on–off SDRE approach. It has also been shown that the proposed method is robust against parametric uncertainties of the states. Present study aims to design an energy-beneficial, simple and attractive controller for a complex nonlinear system with on–off inputs and uncertainty in CRTBP. Simulation results show that the on–off SDRE control could provide the formation flight around L2 point with high accuracy using less energy consumption.     

机载嵌入式可重构信号处理系统设计

为使机载嵌入式信号处理系统性能更加均衡,更好地适应机载嵌入式环境,在比较三种传统的机栽信号处理系统架构的基础上,提出了一种系统可伸缩、功能可重构的信号处理系统架构,并分析了其系统特性和关键技术。从可编程能力、处理性能、通用性以及可扩展性等方面比较了三种信号处理系统架构,结果表明:可重构信号处理系统架构具有较强的综合性能,能更好地满足机载嵌入式应用的需求。     

类X?47B无人机菱形编队气动干扰数值模拟

设计了一种由4架类X?47B飞翼布局无人机（UAVs）组成的菱形编队。通过求解RANS方程的数值模拟方法,研究了菱形编队无人机气动干扰问题,详细分析了影响机理,定量给出了编队减阻效果。计算结果表明:头机气动性能基本保持不变。两侧僚机受上洗气流影响,其减阻效果明显。尾机主要受下洗气流影响,其阻力增大,对编队久航和远航不利。在重力配平条件下,两侧僚机飞行阻力的减小是由攻角减小和诱导阻力减小共同引起的。尾机在编队中飞行阻力的增大主要是攻角增大带来的阻力增加,诱导阻力增大仅带来了20%的阻力增量。从减小下洗气流对尾机的不利影响出发,对不同垂向间距的尾机升阻特性进行了研究,并参考雁群头鸟变换行为机制,给出了无人机菱形编队飞行建议。      

反舰导弹攻击航空母舰毁伤概率结构模型

简单介绍了航空母舰编队的编成。根据其防御特点,建立了反舰导弹攻击航空母舰毁伤概率结构模型,分析了各层元素之间的关系,指出了作战仿真中需重点研究的对象。     

冷轧无间隙原子钢中的微带生成机理

分析了冷轧体心立方金属中微带的形成原因.基于塑性变形理论,运用Taylor模型和Bishop＆Hill最大功原理,计算了变形体心立方晶体中滑移系上的切应变分布.计算结果表明,冷轧时当晶粒的轧向平行于晶粒的某些特定取向时,大量的局部切应变将集中产生在一个滑移面上并在此形成微带.这一高度局域性的切应变是形成剪切带的原因.此时,剪切带与轧制方向之间夹角为30°.另外,微带呈片状是双交滑移的结果,透射电子显微镜观察到的剪切带所在晶粒的取向和所在滑移面证实了这一微带的形成机制.