固体推进剂生产中排放有害物质对大气污染的研究

对固体推进剂生产中排放有害物质引起的大气污染问题，运用高斯模式与环境监测相结合的方法进行了系统研究，评价了不同大气稳定度下苯乙烯的浓度分布，提出了有效的防治措施。     

钛合金TC4与1Cr18Ni9Ti不锈钢的扩散焊工艺探索

选有纯铜和纯镍作为中间层金属，探索ＴＣ４钛合金和１Ｃｒ８Ｎｉ９Ｔｉ不锈钢的真空扩散焊工艺，采用金相法，扫描电镜，Ｘ射线衍射等手段对接头界面附近的微区进行了较详细的分析，结果表明，采用上述中间层进行ＴＣ４－１Ｃｒ１８Ｎｉ９Ｔｉ的扩散焊时，Ｃｕ和Ｔｉ产生强烈的共晶反应，但并末阻止Ｔｉ向不锈钢中扩散，各元素相互扩散的结果，使接头中形成多层次的不同组织和多种化合物，导致接头强度较低，呈脆性断裂。     

中国及邻近地区地磁场垂直梯度的计算与研究

根据地磁场的球谐模型,推导出地磁场各个分量垂直梯度的球谐表达式.计算出中国及邻近地区高度为0km,50km和100km处的地磁场及其垂直梯度的网点值,编绘出地磁总强度、垂直强度、水平强度和磁偏角的垂直梯度等值线图.研究了地磁场垂直梯度在地面上以及随高度的变化规律.     

Combustion modeling in a model combustor

The flow-field of a propane-air diffusion flame combustor with interior and exterior conjugate heat transfers was numerically studied.Results obtained from four combustion models,combined with the re-normalization group(RNG) k-ε turbulence model,discrete ordinates radiation model and enhanced wall treatment are presented and discussed.The results are compared with a comprehensive database obtained from a series of experimental measurements.The flow patterns and the recirculation zone length in the combustion chamber are accurately predicted,and the mean axial velocities are in fairly good agreement with the experimental data,particularly at downstream sections for all four combustion models.The mean temperature profiles are captured fairly well by the eddy dissipation(EDS),probability density function(PDF),and laminar flamelet combustion models.However,the EDS-finite-rate combustion model fails to provide an acceptable temperature field.In general,the flamelet model illustrates little superiority over the PDF model,and to some extent the PDF model shows better performance than the EDS model.      

一种基于主星的导航星座构造方法

提出了一种基于主星的导航星座构造方法,利用不等式约束下多变量函数最优化问题的求解方法实现了导航主星的选取和导航星座的构造。实验表明,采用该方法构造的导航星座数据库,既不会造成导航星的丢失,又显著地减少了需要存储的识别基元的数量,从而有效地降低了导航星座数据库的存储容量。     

车辆导航系统中超前滞后校正方法

分析了车辆导航系统中超前滞后产生的原因,提出了利用地图匹配MM(Map Matching)进行GPS(Global Positioning System)/DRS(Dead Reckoning System)组合导航系统超前滞后校正的方法.该方法是将超前滞后误差归结为GPS误差,先利用GPS沿道路垂直方向上误差的可观测性进行GPS误差校正,再将校正的GPS信息与DRS信息进行卡尔曼滤波,从而减少组合导航系统超前滞后误差.仿真结果表明上述方法是行之有效的.      

Ni基合金与γ-TiAl基合金的固态连接规律研究

通过对Ni基合金进行激光熔覆γ-TiAl基合金涂层处理,对γ-TiAl基合金进行激光表面熔凝处理,提出了一种采用激光表面改性技术和超塑扩散连接相结合的Ni基合金/γ-TiAl基合金连接新技术。研究了合金激光改性层的显微组织特征,探讨了Ni基合金/γ-TiAl基合金固态扩散连接的规律。结果表明:激光表面改性技术提高了Ni基合金/γ-TiAl基合金的连接质量,合金通过激光表面改性处理后,采用连接温度850℃、连接压力60MPa、连接时间1h的连接条件及900℃保温0.5h连接后续热处理,实现了Ni基合金/γ-TiAl基合金的连接。     

Flood susceptibility mapping by ensemble evidential belief function and binomial logistic regression model on river basin of eastern India

Flooding is the overflow of water from stream, river, lake and sea that occurs all over the world and has disastrous effects on human society and environment. Frequent severe flood event in eastern India cause of death and damages every year so, the development of flood susceptibility method is needed for identifying the flood vulnerability areas to reduce the damages. Techniques of Remote Sensing (RS) and Geographical Information System (GIS) can help to flood susceptibility modeling by the accrued and analyzing huge amount of data in short time. The main objectives of this study are to determine the effectiveness of Evidence Belief Function (EBF), binomial Logistic Regression (LR) and ensemble of EBF and LR (EBF-LR) model with RS and GIS techniques for flood susceptibility mapping and spatial prediction of flood-susceptible areas in the Koiya river basin of West Bengal, India. Eight flood conditioning factors; Land use and land cover (LULC), soil, rainfall, normalized differences vegetation index (NDVI), distance to river, elevation, topographic wetness index (TWI) and stream power index (SPI) have been used, and total 264 historical flooding points were mapped, and randomly divided in to training (70%) and validating (30%) dataset. Flood susceptibility map has been generated by applying EBF, LR and ensemble EBF-LR method with the help of training and eight causative factors dataset. The maps have been divided in to six classes; extremely low, very low, low, moderate, high and very high. The receiver operating characteristic (ROC) curve has been used to accuracy assessment of the susceptibility map, and the area under curve (AUC) disclosures 87.9%, 85.2% and 84.1% prediction rate for the EBF-LR, EBF and LR model, respectively. This study is helpful to flood management program, dissection makers and planning in local administrative level.     

MPT方法中的纳米粒子识别技术

多粒子追踪（MPT）是测量粒子布朗运动的一种方法。在200nm粒子扩散系数实验测量中,对MPT方法中的粒子识别和粒子匹配两个重要环节提出改进：在粒子识别时,通过调节灰度阈值并检测光斑面积的改变,可有效分别真实粒子和光晕引起的＂伪粒子＂;在粒子匹配中,将手动追踪和程序追踪得到的粒子单步位移用矢量法表示,可直观显示不同追踪方法的粒子匹配效果。实验结果表明,在MPT方法中增加上述措施后,手动追踪和程序追踪获得的实验扩散系数之间的偏差由8%~13%减小为2%~8%,说明基于阈值敏感性的＂伪粒子＂剔除方法合理、有效。     

基于加权朴素贝叶斯分类器和极端随机树的蛋白质接触图预测

提出一个新的基于集成学习的预测器(TargetPCM),对蛋白质接触图(特别是中长程)进行高精度的预测。首先,TargetPCM使用加权朴素贝叶斯分类器(Weighted Nave Bayes classifier,WNBC)融合3个接触图预测器的输出,其中WNBC中的权重参数通过粒子群算法优化得到;其次,将WNBC融合后的输出和基于序列的特征进行组合,得到更具鉴别能力的特征;在此基础上,应用极端随机树训练得到最终的蛋白质接触图预测模型。为了验证TargetPCM的有效性,在包含98个非冗余蛋白质的数据集上进行了测试。结果表明:对于短程、中程和长程接触,TargetPCM的Top L/5精度比现有最好的集成预测器(NeBcon)分别提高了8.2%,16.1%和5.3%。在CASP11上进一步的验证表明,对于短程、中程和长程接触,TargetPCM的Top L/5精度比现有最好的基于协同进化的集成预测器(MetaPSICOV)分别提高了7.4%,9.1%和7.5%。实验结果验证了本文所提蛋白质接触图预测方法的有效性。