某型水陆两栖飞机主结构铝合金材料选用分析

材料选用是飞机研制过程中的一项重要内容,选用材料的好坏直接影响飞机性能的优劣,飞机选材需要考虑多个因素。某型水陆两栖飞机按照疲劳、损伤容限设计原则进行结构设计。通过对某型水陆两栖飞机载荷工况和服役环境的分析,结合飞机基本选材原则和某型水陆两栖飞机结构设计对材料的静强度性能,疲劳、损伤容限性能,耐腐蚀性能等的要求,综合考虑铝合金材料特点、适航性、成本及供货等因素,最终提出某型水陆两栖飞机结构的铝合金材料选材方案。     

基于虚拟仪器的切削力监控技术研究

研制了一种基于虚拟仪器界面、供现场使用的高精度、高效率的金属切削过程监控系统。研究中采用回归分析、叠加原理及抛物线插值的方法建立切削力模型 ,并基于该模型进行参数估计来提取切削状态特征 ,进而监控整个切削过程     

动力涡轮转子结构系统力学特性稳健设计方法

航空涡轴/涡桨发动机动力涡轮转子是典型多支点支承、具有连接界面、质量/刚度分布不均匀的高速柔性转子系统,其连接结构力学特性和支承刚度的分散性可导致转子系统动力特性恶化。针对典型动力涡轮转子结构系统,指出不可恢复滑移、疲劳、摩擦等连接界面接触损伤是连接结构力学特性产生分散性的内在原因,提出了接触状态系数、接触应力、不可恢复变形能和接触摩擦功等工程适用的定量评估参数。通过对多支点柔性转子-支承系统临界转速分布及其对各支点支承刚度敏感度的影响规律分析,提出了基于支承刚度低敏感区择优的动力特性稳健设计方法,所提方法提高了转子结构系统的稳健性。      

一种起落架载荷谱相似性判别方法

起落架结构的寿命监控对保障其安全性与经济性具有重要作用,但由于地面谱复杂的高低载荷非线性交互作用,难以准确计算单机谱的损伤。以当量损伤计算方法为基础,通过对寿命监控中的单机谱进行初步筛选,判别单机谱与基准谱的相似程度,进而分析损伤计算方法的适用性。提出了一种基于时间序列分析中的动态时间弯曲方法的起落架载荷谱相似性判别方法,进行了基准谱与4个单机谱下的疲劳实验,通过分析损伤计算误差与起落架载荷谱相似距离的关系,验证所提载荷谱相似性判别方法的合理性。      

Vibration signal-based chatter identification for milling of thin-walled structure

In high speed milling aeronautical part, tool condition monitoring(TCM) is very important, because it is prone to get a chatter owing to the low stiffness of thin-walled structures. And the TCM is key technology for automated machining. In this paper, aiming to chatter monitoring in thin-walled structure milling, a variational mode decomposition – energy distribution(VMD-ED)method is proposed to improve the identification accuracy. And a moving average root mean square – mean value(MARMS-MV) ide...     

Real-time clock comparison and monitoring with multi-GNSS precise point positioning: GPS,GLONASS and Galileo

The precise point positioning (PPP) technique is widely used in time and frequency applications. Because of the real-time service (RTS) project of the International GNSS Service, we can use the PPP technique for real-time clock comparison and monitoring. As a participant in the RTS, the Centre National d’Etudes Spatiales (CNES) implements the PPPWIZARD (Precise Point Positioning with Integer and Zero-difference Ambiguity Resolution Demonstrator) project to validate carrier phase ambiguity resolution. Unlike the Integer-PPP (IPPP) of the CNES, fixing ambiguities in the post-processing mode, the PPPWIZARD operates in the real-time mode, which is also called real-time IPPP (RT-IPPP). This paper focuses on applying the RT-IPPP for real-time clock comparison and monitoring. We review the principle of real-time clock comparison and monitoring, and introduce the methodology of the RT-IPPP technique. The observations of GPS, GLONASS and Galileo were processed for the experiments. Five processing modes were provided in the experiment to analyze the benefits of ambiguity resolution and multi-GNSS. In the clock comparison experiment, the average reduction ratios of standard deviations with respect to the G PPP mode range from 9.7% to 35.0%. In the clock monitoring experiment, G PPP mode can detect clock jumps whose magnitudes are larger than 0.9 ns. The RT-IPPP technique with GRE PPP AR (G) mode allows for the detection of any clock jumps larger than 0.6 ns. For frequency monitoring, G PPP mode allows detection of frequency changes larger than 1.1 × 10⁻¹⁴. When the RT-IPPP technique is applied, monitoring with GRE PPP AR (G) mode can detect frequency changes larger than 6.1 × 10⁻¹⁵.     

Characterization of ionospheric amplitude scintillations using wavelet entropy detrended GNSS data

The extensive monitoring networks of Global Navigation Satellite System (GNSS) ionospheric scintillation have been established to continuously log observation data. Further, the amplitude scintillation index and the phase scintillation index, which are derived from scintillation observations, are anticipated to accommodate the accuracy requirement of both the user level and the monitoring station level. However, raw scintillation observations essentially measure superposed waveform impairments of GNSS signals propagating through ionosphere and troposphere. It implies that fluctuations of raw scintillation observations are caused by multiple factors from the entire radio propagation environment. Hence, it is crucial to characterize ionospheric scintillations from GNSS observation data. And the characterization is implemented through extracting fluctuations of raw observations merely induced by ionospheric scintillations. Designed to address this problem by means of Fourier filtering detrending, the present work investigates the influence of varying detrending cutoff frequencies on wavelet statistical energy and wavelet entropy distributions of scintillation data. It consequently derives criteria on the optimum detrending cutoff frequency for three types of raw amplitude scintillation data, which are classified by their wavelet energy distributions. Results of the present work verify that detrending with specific optimum cutoff frequencies rather than the fixed and universally applicable one renders the validity and credibility of characterizing ionospheric scintillations as the part of GNSS observation fluctuations purely induced by ionosphere electron density irregularities whose scale sizes are comparable with or smaller than the Fresnel scale.     

加油机加油过程视频监控需求分析

通过对一般加油过程的分析,提出了空中加油机加油过程视频监控需求。将加油过程分为会合、编队、对接、解散四个部分对监控区域进行讨论,并对监控区域进行整理及优化,从功能、分辨率及显示等方面进行分析,给出适应性的视频监控需求,为机外摄像头布局,摄像头和显示器选型,机外照明布置提供有效支持。     

飞机锁类机构性能退化可靠性分析方法综述

随着航空航天装备的快速发展,对飞行器装备的可靠性要求逐渐提高,飞机锁类机构的可靠性对飞机起降的安全至关重要。以飞机舱门锁机构为研究对象,首先通过文献调研了大量舱门锁机构并分析了锁机构的特点和失效模式,阐述了锁机构的工作原理。其次综述了锁机构失效机理建模、机构渐变损伤的研究现状以及目前存在的问题,分析了国内外有关锁机构可靠性的研究现状;并针对多连杆机构可靠性分析和锁机构可靠性分析进行了分类梳理。最后对锁机构的可靠性分析研究思路进行总结,并对目前复杂锁机构的可靠性分析存在的问题及其研究趋势进行了展望。     

单/双轴预拉载荷对碳纤维复合材料高速冲击性能的影响研究

针对发动机工作时受预载荷的叶片受到外物冲击的情况,设计一种面内单轴及双轴预加载装置,开展单轴与双轴不同大小预拉载荷下碳纤维/环氧树脂复合材料（T700/TDE-86）的高速冲击试验,探究预拉载荷对复合材料抗冲击性能的影响,并结合超声C扫描分析预拉载荷对损伤面积的影响。结果表明：面内初始载荷对复合材料层合板抗冲击性能和分层损伤面积有显著影响;预拉载荷会提高靶板的抗弯刚度,减少靶板吸收的能量,减小弹道极限,且在双轴预拉情况下更明显;弹体击穿靶板后分层损伤面积几乎不变,而预拉载荷会减小分层损伤面积,且在双轴预拉情况下更明显。