波音737—200／300／500飞机尾部结构疲劳裂纹的探伤检查

波音系列飞机一定时间后，飞机尾部结构出现疲劳裂纹，需用涡轮检测法进行损伤检查。     

Long period magnetospheric oscillations at discrete frequencies: The results of a multi-station analysis

A multi-station analysis of geomagnetic field measurements conducted for a remarkable case event, at a European and an American array shows that, although several aspects of the geomagnetic field observations show a clear latitudinal and local time dependence, simultaneous oscillations at discrete frequencies (f ≈ 1.0, 1.3, 2.2 and 3.2 mHz) are almost ubiquitously detected, from low to high latitudes both in the light and dark sector. They are driven by fluctuations of the solar wind density and dynamic pressure at the same frequencies, via the modulation of the magnetopause current. We also report clear evidence for the occurrence of resonant coupling (at f ≈ 2.2 and 3.2 mHz) between such modes and high latitude field lines. Due to the variable length of the field line through the day, oscillation modes at the same frequencies resonate at different latitudes in the daytime and nighttime region, respectively.     

LC4CS铝合金裂纹尖端腐蚀行为的实验研究

ＬＣ４ＣＳ铝合金是极为重要的航空材料，为评定其使用年限，在测定铝合金腐蚀疲劳裂纹的扩展速率时，需要弄清纹尖端金属的腐蚀电化学行为。在腐蚀环境中裂纹尖端由于不断露新鲜金属，因而将具有类似于双金属腐蚀时的电偶效应。为此，文中设计了一种新颖的缺口试样，再现裂纹尖端的真实状态，并在３．５％ＮａＣｌ溶液测定剪切口断裂后，裸露出的新鲜金属在耦合前后腐蚀电位的变化，以及裸露面积，ＮａＣｌ溶液的ｐＨ值与电偶电流的     

基于融合诊断的某型飞机故障诊断应用研究

以某新型军用飞机的电传操纵系统为研究对象,分析了案例推理和故障树诊断的方法。在此基础上,提出了将两种方法进行融合的思想,开发了通用化的故障诊断软件,大大提高了故障诊断效率,对第三代飞机的故障诊断提供了一种有效的途径。     

高速走丝电火花线切割表面条纹的成因研究

分析了高速走丝电火花线切割加工时可通过电极丝空间位置稳定性的改善及选用具有良好洗涤能力的工作介质进行条纹消除的机理.并研究指出在大能量切割时,选用复合工作液以喷射的方式进行冷却,可以大大提高极间的洗涤性能,达到消除表面烧伤纹的目的.     

高效离子电热水器的设计

描述一种由AT89C2051单片机控制的高效离子电热水器，该热水器使用安全，即开即热，转换效率高。     

放映氙灯稳流及稳纹波电路研究

本文简要介绍了放映氙灯电源的现状,详细研究了由中国民航学院三维显示技术研究所最新研制成功的放映氙灯电源中的稳流及稳纹波电路的设计思想和工作原理。理论分析和实验结果表明,本文设计的稳流及稳纹波电路显著地提高了氙灯电源的可靠性及减小了氙灯电流的纹波系数且操作简便,利于推广应用。     

GKF算法下对机动目标多步预测的误差分析

机动目标运动状态的多步预测是为了更好的为机动目标的跟踪提供数据支持,因此要保证多步预测数据的可用性,需要知道预测的精度,由此要对预测数据做误差分析。本文在对机动目标运动轨迹实施多步预测的基础上分析了多步预测过程中随机误差的传递,以及传递的随机误差对多步预测的影响。仿真结果显示,预测中传递误差方差占预测误差方差的绝大部分,是影响预测精度的最重要因素之一。     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

波音757客改货航电系统改装

简要介绍了波音757-200客改装货时航电系统改装的主要工作内容和改装工作中的关键点,以及为保证整体改装工作的进度而实施的的创新手段。