RP-3航空煤油模拟替代燃料燃烧特性的实验

在定容弹中实验测试了初始压力分别为0.1、0.3 MPa、初始温度分别为390、400、420 K、当量比范围为0.8～1.5时RP-3航空煤油模拟替代燃料的层流燃烧特性,并对比分析了模拟替代燃料与RP-3航空煤油的层流燃烧速率。结果表明,模拟替代燃料层流燃烧火焰的马克斯坦长度随初始压力或当量比的降低逐渐增大,表明火焰稳定性逐步增强；初始温度对火焰稳定性的影响不明显；随初始温度的升高或初始压力的降低,模拟替代燃料的层流燃烧速率逐渐升高；随着当量比的逐渐增大,模拟替代燃料的层流燃烧速率先增大后降低,在当量比为1.2时达到最大；在相同工况下,模拟替代燃料与RP-3航空煤油的层流燃烧速率吻合较好。      

等离子体助燃下超燃支板燃烧室燃烧特性数值研究

为了将支板喷注器与等离子体射流这两种促进超声速燃烧室燃烧的方式结合起来,设计了一种带有等离子体射流喷孔的支板燃烧室,并在超声速来流的条件下,针对燃料喷注总压、燃料喷注位置、等离子体射流介质、等离子体射流总压对燃烧室燃烧性能的影响进行了三维数值模拟。研究发现:增大燃料的喷注总压,燃烧室的燃烧范围明显增大,燃烧效率呈现出先增大后减小的趋势,在燃料喷注总压为2.0MPa时,燃烧效率达到最大值90.4%;不同的燃料喷注位置对燃烧室的燃烧范围影响较小;等离子体射流介质为O2时,燃烧效率最高,燃烧范围最广;提高等离子体射流的喷注总压,能够提升凹腔剪切层高度,有效促进燃烧,但同时也带来了更高的总压损失。     

Aerodynamic performance enhancement for flapping airfoils by co-flow jet

Introducing active flow control into the design of flapping wing is an effective way to enhance its aerodynamic performance. In this paper, a novel active flow control technology called Co-Flow Jet (CFJ) is applied to flapping airfoils. The effect of CFJ on aerodynamic performance of flapping airfoils at low Reynolds number is numerically investigated using Unsteady Reynolds Averaged Navier-Stokes (URANS) simulation with Spalart-Allmaras (SA) turbulence model. Numerical methods are validated by a NACA6415-based CFJ airfoil case and a S809 pitching airfoil case. Then NACA6415 baseline airfoil and NACA6415-based CFJ airfoil with jet-off and jet-on are simulated in flapping motion, with Reynolds number 70,000 and reduced frequency 0.2. As a result, CFJ airfoils with jet-on generally have better lift and thrust characteristics than baseline airfoils and jet-off airfoil when C_μ is greater than 0.04, which results from the CFJ effect of reducing flow separation by injecting high-energy fluid into boundary layer. Besides, typical kinematic and geometric parameters, including the reduced frequency and the positions of the suction and injection slot, are systematically studied to figure out their influence on aerodynamic performance of the CFJ airfoil. And a variable C_μ jet control strategy is proposed to further improve effective propulsive efficiency. Compared with using constant C_μ, an increase of effective propulsive efficiency by 22.6% has been achieved by using prescribed variable C_μ for NACA6415-based CFJ airfoil at frequency 0.2. This study may provide some guidance to performance enhancement for Flapping wing Micro Air Vehicles (FMAV).     

面向空中交通节能减排的真空速估算模型

为了实现终端区内空管单位燃油消耗的有效评估,结合综合航迹数据采用数据挖掘技术,提出一种基于航迹数据的终端区真空速的估算模型.首先应对综合航迹数据处理,提出了对综合航迹处理的方法;通过在中国气象数据网上获取机场上空风的数据,利用插值法建立机场上空风场的模型;分析航行速度三角形,推导出真空速计算模型.最后分别以离场和进场的QAR数据,用Matlab对真空速进行仿真估算.结果表明:方法能够有效地利用综合航迹数据进行真空速的估算.     

面向客机总体设计的涡扇发动机分析模型

建立一种用于估算涡扇发动机特性的工程分析模型，该模型以涡喷发动机推力估算模型与涡扇发动机效率分析方法为基础，引入高涵道比涡扇发动机的循环分析方法进行修正。利用该模型可以获取涡扇发动机的推力和油耗特性，进而考察总体循环参数对发动机性能的影响。通过与文献验证数据对比，判定了分析模型的精度。该模型只需要输入少量参数就可以快速完成计算过程，适合于飞机总体设计阶段，可以评估涡扇发动机参数对飞机性能的影响。     

基于可靠性数据的航材备件需求预测方法

航材备件的需求预测已成为装备综合保障领域研究的难点.主要对各部件寿命分布类型进行归纳与总结,建立多数零件服从寿命分布类型的需求预测模型,并对军机执行任务这一特殊情况建立了战损备件预测模型.以可靠性数据为研究基础,对正态分布、指数分布、威布尔分布等备件进行分类分析,根据实际情况逐步精确备件保障概率的取值.计算结果表明,方法能给出合理的备件保障概率和备件需求预测结果.     

Numerical simulations of turbulent flows in aeroramp injector/gas-pilot flame scramjet

To uncover the internal flow characteristics in an ethylene-fueled aeroramp injector/gaspilot(ARI/G-P)flame scramjet,a Reynolds-averaged Navier-Stokes(RANS)solver is constructed under a hybrid polyhedral cell finite volume frame.The shear stress transport(SST)k-x model is used to predict the turbulence,while the Overmann’s compressibility corrected laminar flamelet model is adopted to simulate the turbulent combustion.Nonreactive computations for Case 1(G-P jet on),Case 2(ARI jets on),and Case 3(both ARI and G-P jets on)were conducted to analyze the mixing mechanism,while reactive Cases 4–7 at equivalent ratios of 0.380,0.278,0.199 and0.167 respectively were calculated to investigate the flame structure and combustion modes.The numerical results are compared well to those of the experiments.It is shown that the G-P jet plays significant role in both the fuel/air mixing and flame holding processes;the combustion for the four reactive cases takes place intensively in the regions downstream of the ARI/G-P unit;Cases 4 and 5are under subsonic combustion mode,whereas Cases 6 and 7 are mode transition critical and supersonic combustion cases,respectively;the mode transition equivalent ratio is approximately 0.20.     

非恒定增压式微尺度拉瓦尔喷管流动特性

针对微尺度喷流在航天器运动状态切换时出现的非恒定增压变化,采用直接模拟蒙特卡洛(DSMC)方法对阶跃式增压和线性式增压两种模式下的微尺度拉瓦尔喷管流场进行了模拟,并对其变化过程中的流动特性进行了对比分析。结果显示：阶跃式增压会导致流动特性出现较大幅值的峰谷式波动,而线性式增压下的流动特性则呈现出线性变化的特点;黏性力对微尺度喷流的非恒定增压变化产生了重要的黏滞作用,在喉部扩张段至出口的流场中尤为明显;在设定的条件下,阶跃式增压过程中喷流产生的总冲量较线性式增压高59.5%,质量流量高74.7%,单位工质提供的冲量低约8.6%,波动性也高于线性式模型,阶跃式增压适用于系统需要较大推力改变运动状态且推进剂充足的情况,而线性式增压在系统精确微调或需要推进剂产生更高效能时具有明显的优势。     

一种温度动态调节方法及其动态性能仿真研究

航空气源模拟试验台主要用于模拟不同飞行状态时发动机给空气管理系统的供气,由于飞机爬升、降落时发动机供气参数会急剧变化,因此航空气源模拟试验台需具备动态能力.基于一种温度动态调节方法,在合理简化的基础之上采用NHT方法对其温度动态性能进行了仿真研究,仿真结果表明该温度动态调节方法能够满足温度动态性能需求,对动态航空气源模拟试验台的设计选型有较高的参考价值.     

鸭式布局飞机矢量喷流对地面效应影响的风洞试验

针对单发鸭式布局飞机，通过低速风洞试验，研究了矢量喷流对飞机地面效应的影响特性。研究结果表明：发动机喷流使得飞机的地面效应增强，升力系数增加，降低飞机起飞/降落时的飞行速度，缩短起降距离，从而改善飞机起降性能。发动机喷管上/下偏转时，矢量喷流对飞机上下表面气流诱导不对称，均使地面效应阻力系数增量减小。在此基础上，基于数值模拟结果对喷流与地面效应的相互作用机理进行了分析。