共轴刚性双旋翼/机身干扰流场数值模拟

采用滑移网格技术求解Navier-Stokes (RANS)方程的方法,研究了共轴刚性双旋翼/机身的干扰问题。通过Caradonna-Tung旋翼、Robin直升机、Maryland直升机旋翼/机身干扰和Harrington 2共轴双旋翼等算例,验证了所提出的旋翼流场数值模拟方法的正确性。在此基础上,以Maryland机身为原型,分析了不同桨距的共轴刚性双旋翼与机身之间的干扰特性。结果表明:所提出的数值模拟方法能够很好地模拟共轴刚性双旋翼/机身的气动干扰特性;由于机身对于共轴刚性双旋翼下洗流场的阻滞作用,旋翼的悬停效率增加5%左右,并且随着拉力系数的增大使得悬停效率的增量更加明显;旋翼的悬停效率增加主要来源于下旋翼0°方位角附近的桨叶升力系数的增大,并且拉力系数的增量由桨根向桨尖方向逐渐减小。      

Behavior and functional modeling methods of doubly salient electromagnetic generators for aircraft electrical power system applications

The Doubly Salient Electromagnetic Generator(DSEG) is a promising candidate in aircraft generator application due to the simplicity, robustness and reliability. However, the field windings and the armature windings are strongly coupled, which makes the inductance characteristics non-linear and too complex to model. The complex model with low precision also leads to difficulties in modeling and analysis of the entire aircraft Electrical Power System(EPS). A behavior level modeling method based on modified inductance Support Vector Machine(SVM) is proposed. The Finite Element Analysis(FEA) inductance data are modified based on the experiment results to improve the precision. A functional level modeling method based on input–output characteristics SVM is also proposed. The two modeling methods are applied to a 9 kW DSEG prototype. The steady state and transient process precision of the proposed methods are proved by comparing with the experiment results. Meanwhile, the modeling time consumption, the application time consumption and the calculation resource demand are compared. The DSEG behavior and functional modeling methods provide precious results with high efficiency, which accelerates theoretical analysis and expands the application foreground of the DSEG in the aircraft EPS.     

蜻蜓起飞过程飞行特征实验

针对蜻蜓自由起飞过程和准自由起飞过程进行实验观测,采用两个光轴相互垂直的高速摄像机进行拍摄,通过特征点匹配和三维重构方法准确地捕捉了两种起飞过程中蜻蜓身体和翅膀的运动参数,并进行运动特征分析与对比。实验结果表明:蜻蜓在自由起飞过程中采用同步振翅,离地后逐步转换成异步振翅(约110°),最大瞬时竖直加速度可以达到20m/s2;在准自由起飞过程中采用异步振翅(相位差180°),之后相位差逐步降低,最大瞬时竖直加速度为12m/s2;此外发现同步振翅、大攻角下拍及大拍动角有利于升力的产生。      

空冷电机气动噪声的分析与验证

介绍了空冷电机气动噪声的来源、测量方法以及工程上常用的气动噪声控制措施。以某空冷电机为例,采用CFD方法对外风路的稳态流场、瞬态流场以及声场进行了数值分析,将计算结果通过试验进行验证。这对自通风型空冷电机的气动噪声分析具有一定的参考意义。     

Geometric error analysis of an over-constrained parallel tracking mechanism using the screw theory

This paper deals with geometric error modeling and sensitivity analysis of an overconstrained parallel tracking mechanism. The main contribution is the consideration of overconstrained features that are usually ignored in previous research. The reciprocal property between a motion and a force is applied to tackle this problem in the framework of the screw theory. First of all, a nominal kinematic model of the parallel tracking mechanism is formulated. On this basis, the actual twist of the moving platform is computed through the superposition of the joint twist and geometric errors. The actuation and constrained wrenches of each limb are applied to exclude the joint displacement. After eliminating repeated errors brought by the multiplication of wrenches, a geometric error model of the parallel tracking mechanism is built. Furthermore,two sensitivity indices are defined to select essential geometric errors for future kinematic calibration. Finally, the geometric error model with minimum geometric errors is verified by simulation with SolidWorks software. Two typical poses of the parallel tracking mechanism are selected, and the differences between simulation and calculation results are very small. The results confirm the correctness and accuracy of the geometric error modeling method for over-constrained parallel mechanisms.     

共轴刚性旋翼气动干扰数值计算方法

建立了一个适用于共轴刚性旋翼气动特性分析的数值模拟方法。该方法采用任意拉格朗日欧拉方法(Arbitrary Lagrange Euler,ALE)描述的可压缩Navier-Stokes(N-S)方程求解流场,采用低数值耗散的Roe格式进行空间离散;使用多重嵌套网格方法以模拟双旋翼的运动。针对共轴刚性旋翼配平,引入"差量修正"策略解决了传统配平中雅克比矩阵计算复杂的问题。首先,对Harrington-2共轴双旋翼的悬停气动性能进行了计算,然后,对某2 m直径共轴双旋翼的悬停及前飞状态进行了计算,并与试验值进行了对比。结果表明:在典型状态下拉力系数的计算结果与试验值误差在3%以内,扭矩系数的计算结果与试验值误差基本在5%以内;所采用的数值计算方法对旋翼涡尾迹特征具有较高的捕捉精度,可以有效模拟共轴刚性旋翼悬停和小速度前飞下的复杂流场及其细节特征。     

翼身融合布局飞机机体-发动机气动干扰效应

翼身融合（BWB）布局飞机是一种相对较新的飞行器概念，具有商业运输飞机的潜在用途。研究表明，翼身融合布局客机可获得比常规布局客机更好的性能。但是，由于各方面限制，BWB飞机不宜使用传统的机翼安装或机身安装的发动机布局，发动机背部安装成为首选布局。然而，背部安装发动机容易产生激波、分离、进气畸变等空气动力干扰问题，发动机与机身一体化的气动设计已成为BWB飞机发展的关键技术。针对BWB布局飞机的机体和发动机之间的气动干扰进行了数值研究，结果表明，背部安装发动机对BWB布局飞机的全机气动特性和发动机本身的推力性能都会产生较为明显的影响。     

A data-driven approach to modeling high-density terminal areas: A scenario analysis of the new Beijing,China airspace

Airports are being developed and expanded rapidly in China to accommodate and pro-mote a growing aviation market. The future Beijing Daxing International Airport (DAX) will serve as the central airport of the JingJinJi megaregion, knitting the Beijing, Tianjin, and Hebei regions together. DAX will be a busy airport from its inception, relieving congestion and accommodating growth from Beijing Capital International Airport (PEK), currently the second busiest airport in the world in passengers moved. We aim to model terminal airspace designs and possible conflicts in the future Beijing Multi-Airport System (MAS). We investigate standard arrival procedures and mathematically model current and future arrival trajectories into PEK and DAX by collecting large quantities of publicly available track data from historical arrivals operating within the Beijing terminal airspace. We find that (1) trajectory models constructed from real data capture aberrations and deviations from standard arrival procedures, validating the need to incorporate data on histor-ical trajectories with standard procedures when evaluating the airspace and (2) given all existing constraints, DAX may be restricted to using north and east arrival flows, constraining the capacity required to handle the increases in air traffic demand to Beijing. The results indicate that the termi-nal airspace above Beijing, and the future JingJinJi region, requires careful consideration if the full capacity benefits of the two major airports are to be realized.     

数学建模在应用型人才培养中的作用分析

数学建模可以提升学生综合素质，培养其创新及实践能力，因此，提高高校大学生的数学建模能力，对于培养应用型人才具有十分重要的意义。针对数学建模在应用型人才培养中的作用进行了分析，并提出了若干建议，以提升高校大学生的数学建模能力。     

野战环境下大型飞机超低空气动特性分析

针对野战环境下的大型飞机超低空飞行,采用CFD方法对地面存在前向或横向不对称障碍物时地面效应对气动参数的影响进行了数值分析,包括纵向稳定性和侧向摇晃等问题.研究结果表明,野战等非常规飞行条件下,地面不确定障碍物会造成大型飞机稳定性变差,严重时可能出现纵向点头和横侧向摇晃现象,容易导致触地危险.最后,从现代飞行控制理论角度提出了对常规布局大型飞机进行闭环控制的研究思路.