双定子涡流制动器电磁参数对制动力矩的影响

介绍了双定子涡流制动器(DSECB)的工作原理。根据等效磁路法推导了DSECB制动力矩公式。利用有限元法对DSECB进行了3D仿真分析。详细分析了DSECB各电磁参数对制动力矩特性曲线的影响,为DSECB优化设计提供了参考依据。     

Digital fixed-frequency hysteresis current control of a BLDC motor applied for aerospace electrically powered actuators

In the conventional cascade control structure of aerospace electrically powered actuators, the current (or electromagnetic torque) loop plays a critical role in realizing a rapid response for a digitally controlled BrushLess Direct Current (BLDC) motor. Hysteresis Current Control (HCC) is an effective method in improving the performance of current control for a BLDC motor. Nevertheless, the varying modulating frequency in the traditional HCC causes severe problems on the safety of power devices and the electromagnetic compatibility design. A triangular carrier-based fixed-frequency HCC strategy is expanded by relaxing the constraints on the rising and descending rates of the winding current to advance the capability of HCC to realize fixed-frequency modulation in the steady state. Based on that, a new flexible-bound-size quasi-fixed-frequency HCC is proposed, and the range feasible to realize fixed-frequency modulation control can cover the entire running process in the steady state. Meanwhile, a corresponding digital control strategy is designed, and four digitalization rules are proposed to extend the capacity to achieve fixed-frequency modulation control to the unsteady working state, that is, a novel fixed-frequency modulation is realized. Simulation and experimental results prove the effectiveness of this improved fixed-frequency HCC strategy.     

核磁共振陀螺高精度磁场驱动技术

核磁共振陀螺（NMRG）是利用激光与核磁共振气室中的碱金属原子和惰性气体原子的相互作用使核子以拉莫尔频率进动,并通过磁场驱动技术对气室磁场实现闭环控制和对剩磁进行补偿来维持核子的共振状态,进而能够检测载体的角速度信息。磁场驱动技术作为磁场闭环控制的重要部分,直接影响核磁共振陀螺的磁场控制精度和稳定性。为了解决核磁共振陀螺磁场控制精度和稳定性不足的关键问题,采用交直流分离设计的压控电流源方案改善磁场驱动问题,基于噪声分析理论对电路进行建模和噪声分析,并通过实验验证对三轴线圈的横向磁场控制精度达±0.046 2 nT,纵向磁场控制精度为±0.003 1 nT,实验证明该技术方案具有较强的工程应用价值。      

多电极偶接对金属大气腐蚀影响的试验与仿真

搭建薄液膜厚度测量与控制装置,采用微距参比电极后置法组建三电极体系,测量了厚度为100 μm的3.5wt% NaCl液膜下2A12铝合金、TC18钛合金和30CrMnSiNi2A高强钢的极化曲线和耦合体系的电偶电流;建立了基于薄壳电流分布的Comsol腐蚀仿真模型,得到了100 μm液膜下电极电位分布和电流密度分布图,通过对电极表面进行局部电流面积分计算得到了其电偶电流,对不同电极进行了面积的参数化扫描,讨论分析了不同面积比对于电偶电流的影响。结果表明：利用仿真模型得到的电偶电流值与试验值吻合较好,在2A12/30CrMnSiNi2A/TC18多电极体系中2A12充当阳极,TC18/30CrMnSiNi2A充当阴极,且阴阳极极性不随面积比的变化而发生转变,电偶电流主要集中在30CrMnSiNi2A与2A12之间,电偶电流与TC18面积呈线性关系,其对数与2A12和30CrMnSiNi2A面积的对数之间呈线性关系。利用建立的仿真模型对模拟搭接件大气腐蚀进行了仿真研究,仿真发现垫圈、2A12与30CrMnSiNi2A偶接接缝处及2A12与TC18偶接铆钉处电流密度分布更为集中,易发生腐蚀,与暴晒试验结果相符,说明该仿真模型对于多电极偶接的腐蚀分布具有很好的预测作用。     

基于改进控制策略与动态无功支撑相结合的高电压穿越方法研究

针对双馈风力发电机高电压穿越问题,利用Laplace变换对电网电压骤升时电磁暂态过渡过程进行分析,得出定子电流不仅含有直流分量,还包含有工频交流成分,并通过仿真频谱验证了理论分析的正确性。不同于常规研究中只在转子电压方程考虑定子磁链的动态变化,而忽略了其对功率外环的影响,分析了定子磁链动态变化对有功、无功解耦的影响,在此基础上对功率外环进行传统矢量控制策略的改进。此外,考虑并网规范对机组无功电流支撑的要求,控制换流器输出与电网电压骤升幅度相匹配的无功电流,帮助故障电网快速恢复。仿真结果表明,该方案不仅能够保证电网电压骤升时双馈机组不脱网运行,而且也满足并网规范对机组无功电流输出的要求,实现高电压穿越。     

平流层飞艇动力推进系统的分析与设计

针对平流层飞艇螺旋桨与直流无刷(DC)电动机匹配问题,建立了直流无刷电动机模型和螺旋桨模型;结合匹配设计和直流无刷电动机转速控制,在Simulink中设计了螺旋桨与直流无刷电动机控制系统仿真模型,研究飞艇在0~10m/s巡航速度下动力推进系统控制响应问题;采用图形用户界面(GUI)编写螺旋桨与直流无刷电动机匹配界面,开发了一种螺旋桨与直流无刷电动机匹配软件;得到了飞艇在0~10m/s巡航速度下,螺旋桨工作转速为535~1071r/min,动力推进系统工作效率为0.558~0.593时推进系统匹配设计的工作曲线,为高空螺旋桨与电动机的匹配设计提供了参考依据.      

磁轴承PWM开关功放电流实时降噪

针对传统低通滤波器在脉冲宽度调制(PWM, Pulse Width Modulation)开关功放电流降噪过程中存在去噪效果与系统带宽难以兼顾的问题,提出了一种基于提升小波变换的功放电流实时降噪法.首先基于dB4提升小波算法,采用滑动数据窗、对称边界拓展和阈值法强制降噪等相结合的方案实现对功放电流的实时降噪.然后根据不同小波分解层数对系统截止频率的影响,确定合适的小波分解层数.实验证明,提升小波实时降噪算法既可以有效地滤除功放电流噪声,又对系统带宽和相角滞后影响较小,非常适用于对实时性和信噪比都有较高要求的磁悬浮高速转子系统.      

飞机发动机叶片缺陷的差激励涡流传感器检测

针对某型号飞机发动机涡轮叶片上预制的微裂纹缺陷进行了检测研究.基于涡流检测技术设计并研制了一种尺寸小、灵敏度高的差激励探头,应用有限元分析软件开展了叶片微裂纹缺陷仿真分析.为了实现叶片的自动高效检测,设计并采用数控多自由度扫查台来控制采集过程,实现了对叶片表面裂纹缺陷的快速扫查检测.采集信号经过信号调理电路,A/D转换后输入计算机,完成信号的保存、处理和输出.通过对比实验结果与仿真结果发现,研制的差激励式涡流传感器可以有效地实现对叶片类零件表面微裂纹位置的判定,对涡轮叶片类零件微缺陷早期诊断评估具有一定的现实和借鉴意义.      

一种新型双轴太阳帆板驱动线路盒设计

针对双轴太阳帆板驱动装置2个电机的控制要求,提出一种新型双轴帆板驱动线路盒（BSADE,biaxial solar array drive electronics）设计.该线路盒基于现有帆板驱动线路设计,通过在电机驱动线路中设计一种电流方向转换延时线路,解决了电流方向转换瞬间功率管容易对穿的问题,确保了驱动线路工作的安全性,使得原先大功率管才能实现的线路选用小功率管实现,达到了小型化目标.通过对电机驱动线路和负载绕组进行交叉重组设计,解决了主备份线路间磁耦合问题,实现了严格冷备份目标,大大提高了可靠性.     

On the large-scale structure of the tail current as measured by THEMIS

The magnetic field structure and the spatial characteristics of the large-scale currents in the magnetospheric tail were studied during quiet and moderately disturbed geomagnetic conditions in 2009. The magnetic field of the currents other than the tail current was calculated in terms of a paraboloid model of the Earth’s magnetosphere, A2000, and was subtracted from measurements. It was found on the base of obtained tail current magnetic field radial distribution that the inner edge of the tail current sheet is located in the night side magnetosphere, at distances of about 10 R_E and of about 7 R_E during quiet and disturbed periods respectively. During the disturbance of February 14, 2009 (Dst_min ∼ −35 nT), the B_x and the B_z component of the tail current magnetic field near its inner edge were about 60 nT, and −60 nT that means that strong cross-tail current have been developed. The tail current parameters at different time moments during February 14, 2009 have been estimated. Solar wind conditions during this event were consistent with those during moderate magnetic storms with minimum Dst of about −100 nT. However, the magnetospheric current systems (magnetopause and cross-tail currents) were located at larger geocentric distances than typical during the 2009 extremely quiet epoch and did not provide the expected Dst magnitude. Very small disturbance on the Earth’s surface was detected consistent with an “inflated” magnetosphere.