液体火箭发动机诱导轮空化热力学效应研究

为了研究空化热力学效应,以模型诱导轮为研究对象,改变流量、水温等条件,对其内部空化流动进行了可视化实验研究,完整记录了从空化初生至性能断裂点各工况的空化区形态。结果表明:温度对诱导轮无空化水力性能没有显著影响,但是高温下诱导轮的空化性能断裂点被显著延后,体现了热力学效应的影响。对比不同温度下的空化区形态,发现热力学效应的强弱与流动工况密切相关,在小空化数下体现得更为显著。同时引入一种半经验的理论模型预测热效应对空化性能的影响,小流量(Φ=0.071)下预测结果与实验结果平均偏差为5.5%,大流量(Φ=0.088)下平均偏差为10.8%,验证了模型在本文应用条件下的可靠性。     

均匀流吹吸式通风实验研究

介绍了吹吸式通风气流的特点,并对吹吸风口间距3.5～3.8m时的低速流场的吹吸式通风气流流场的规律特性进行了实验研究。结果表明,当吹吸风口间距小于3.8m时,低速流场吹吸式通风的气流在射流起始段未结束时就进入了汇流段(吹吸气流流场中未出现射流主体段)。高速流场吹吸式通风的轴心速度经验公式与低速流场的吹吸式通风实验结果式对比分析,发现两者之间存在较大的偏差。高速流场吹吸式通风的轴心速度经验公式不适用于描述低速流场吹吸式通风轴心速度的规律特性。     

Investigation of natural and artificial stimulation of the ionospheric Alfvén resonator at high latitude

A brief review is provided of recent progress in understanding the ionospheric Alfvén resonator (IAR) at high latitude. Firstly, naturally occurring resonances of the IAR as detected by pulsation magnetometers in the auroral zone at Sodankylä and in the polar cap at Barentsburg are considered. The characteristics of the IAR in the two regions are broadly similar, although the effects of solar illumination are less clear at the higher latitudes. Secondly we review recent attempts to stimulate the IAR through high-power radio frequency experiments both in the auroral zone at Tromsø with the European Incoherent SCATter (EISCAT) heater, and within the polar cap at Longyearbyen with the Space Plasma Exploration by Active Radar (SPEAR) facility. In the auroral zone at, Tromsø the stimulated IAR has been observed by ground-based magnetometers, and through electron acceleration observed on the FAST spacecraft. At SPEAR in the polar cap, the stimulated IAR has been investigated, with ground magnetometers, with the first results indicative of a positive detection.     

Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

Quantitative assessment and visualization of flight risk induced by coupled multi-factor under icing conditions

Aircraft icing has been proven to be one of the most serious threats to flight safety. During the analysis of flight risk under icing conditions, quantitative assessment and visualization of flight risk are quite essential as they provide safe manipulation strategies in intricate conditions. However, they are rarely studied. Since the icing flight accidents are the result of the coupling of multiple unfavorable factors, in present study, we have proposed a method to quantitatively assess flight risk induced by multi-factor coupling under icing conditions by Monte-Carlo simulation and multivariate extreme value theory. The results demonstrate that the flight risk probability increases with the rise of unfavorable factors. Besides, a flight risk visualization method named flight safety window has been presented to build the flight risk distribution cloud maps in different complex conditions. The cloud maps show that the icing would give rise to atrophy of the safety scope, and the consequence would be even more severe when coupled with other more unfavorable factors. The proposed methods in this study would be useful in flight risk analysis under icing conditions and can enhance the pilot's situational awareness in selecting correct strategies within the safety zone to avoid unsafe manipulation.     

用于空间探测飞行时间质谱仪的真空系统和取样系统设计

文章介绍了可用于空间探测飞行时间质谱仪的真空系统和取样系统设计,并建立了该TOFMS原理样机的地面试验系统。为适应空间探测和地面试验2种不同工作模式,设计了2套不同的真空系统。根据文章建立的气体样本进样的理论分析模型进行理论分析计算,并通过地面适应性试验测定了质谱室的真空度、空气的Voltage-Amu谱图、Kr样本Voltage-Amu谱图及进样时间。试验结果表明:真空系统和取样系统设计合理,能够满足试验需求;理论分析模型正确,能够用于指导试验。     

Challenges and perspectives of transport cargo vehicles utilization for performing research in free flight

Russian Progress transport cargo vehicles have successfully been used in different space station programs since 1978. At present time, they play an important role in the International Space Station (ISS) project. Main tasks performed by the transport cargo vehicle (TCV) in the station program are the following: refueling of the station, delivery of consumables and equipment, waste removal, station attitude control and orbit correction maneuver execution.     

空间天气模式集成可视化演示软件设计

空间天气模式集成是空间天气预报业务化的基础, 空间天气模式集成可视化演示软件系统是其中重要的研究内容之一. 空间天气模式种类繁多, 要素多样, 模型复杂, 且各模式可视化形式及方法具有差异性. 本文综合当前中国空间天气模式的特点, 构建了一套空间天气模式集成可视化演示系统. 该系统兼容性好、可扩展性高, 能够集成当前中国空间天气中大多数模式. 讨论了空间数据管理方法, 基于Visual C++ 软件平台和OpenGL可视化软件模块,以动态加载方式初步实现了多个空间天气模式的可视化集成.      

微生物对航空煤油影响的实验研究

微生物活动会造成航空煤油变质、过滤器阻塞、设备腐蚀、仪表失灵等严重后果,影响航空安全。将采集的污染航空煤油试样,与纯净油品在实验室进行富集培养,研究了微生物油品污染前后的密度、粘度、总酸值、固体颗粒、冰点等指标的变化情况。指出了现有航空油料管理规定在微生物检测方面所存在的不足,提出了增加部分检测指标的建议,以尽早发现微生物的活动。     

A method of multi-objective reliability tolerance design for electronic circuits

Tolerance design plays an important role in reliability design for electronic circuits. The traditional method only focuses on the consistency of output response. It is not able to meet the needs of increasing development of electronic products. This paper researches the state of related fields and proposes a method of multi-objective reliability tolerance design. The characteristics of output response and operating stresses on critical components are both defined as design objectives. Critical components and their operating stresses are determined by failure mode and effect analysis (FMEA) and fault tree analysis (FTA). Sensitivity analysis is carried out to determine sensitive parameters that affect the design objectives significantly. Monte Carlo and worst-case analysis are utilized to explore the tolerance levels of sensitive parameters. Design of experiment and regression analysis are applied in this method. The optimal tolerance levels are selected in accord with a quality-cost model to improve consistency of output response and reduce failure rates of critical components synchronously. The application in light-emitting diode (LED) drivers indicates details and potential. It shows that the proposed method provides a more effective way to improve performance and reliability of electronic circuits.