热-机耦合分析的有限元法及其应用

基于有限元分析的基本原理,建立了热-机耦合问题分析的有限元基本方程,并对工件挤压过程及摩擦制动问题进行了分析。算例表明,热-机耦合分析方法能很好地模拟受热结构的温度场和应力应变场,为结构设计和工艺设计提供依据。     

Controlling factors of Region 2 field-aligned current and its relationship to the ring current: Model results

One essential component of magnetosphere and ionosphere coupling is the closure of the ring current through Region 2 field-aligned current (FAC). Using the Comprehensive Ring Current Model (CRCM), which includes magnetosphere and ionosphere coupling by solving the kinetic equation of ring current particles and the closure of the electric currents between the two regions, we have investigated the effects of high latitude potential, ionospheric conductivity, plasma sheet density and different magnetic field models on the development of Region 2 field-aligned currents, and the relationship between R2 FACs and the ring current. It is shown that an increase in high latitude potential, ionospheric conductivity or plasma sheet density generally results in an increase in Region 2 FACs’ intensity, but R2 FACs display different local time and latitudinal distributions for changes in each parameter due to the different mechanisms involved. Our simulation results show that the magnetic field configuration of the inner magnetosphere is also an important factor in the development of Region 2 field-aligned current. More numerical experiments and observational results are needed in further our understanding of the complex relationship of the two current systems.     

余度数据总线电气隔离度的测试与分析

"余度数据总线电气隔离度测试"是检验在数据总线和余度电缆之间存在电气耦合度的大小.通过对数据总线屏蔽层在接地与不接地状态下的电气隔离度测试,分析了"有传输活动"电缆对"无传输活动"电缆干扰的特征,阐述了电缆屏蔽层的良好接地是确保余度数据总线电气隔离度满足要求的关键.     

一种Ka频段宽带3dB功分桥的实现技术研究

文章简要介绍了波导宽边耦合3dB功分桥的工作原理，重点阐述四耦合窗Ka频段宽带波导宽边耦合3dB功分桥的仿真设计过程、仿真结果以及最终的实物测试结果。最后得到一个性能优良的Ka频段宽带波导宽边耦合3dB功分桥。     

基于量子行为鸽群优化的无人机紧密编队控制

随着军事、民用需求的提高和相关领域的技术推动，无人机编队协同作业已成为当今人们逐渐关注的焦点。无人机紧密编队是指无人机间侧向距离在1~2倍翼展内的编队，因其可有效改善编队中无人机的气动性能而备受瞩目。基于无人机紧密编队条件下的气动耦合效应，建立三维空间下的状态空间方程描述双机相对运动，并推导了紧密编队条件下的双机最优编队构型，在此构型下将人工势场法和编队控制相结合作为控制系统中的间接控制环，并针对基本鸽群优化算法的寻优缺陷利用量子行为规则对其进行改进，将改进后的鸽群优化算法和无人机控制量结合作为控制系统中的直接控制环，最后通过仿真对比验证了此控制系统对于紧密编队控制的有效性。     

平方阻尼在非线性缓冲系统中的作用

本文讨论平方阻尼(以参数a表征)在图(1)所示的缓冲系统中的作用,结果表明:平方阻尼对于降低相对位移峰值d_m总有良好的效果,但不一定降低加速度峰值a_m。在一定速度冲击V下,系统的平方阻尼有两种最佳值,使a_m最小的a_(am)和使缓冲效率γ最高的a_(cm),而平方阻尼最佳条件依赖于系统的缓冲弹簧的刚度变化类型: (1)线性弹簧情况:a_(am)=a_(cm),最佳条件为系统在首程中均匀减速; (2)渐硬弹簧情况:a_(am)=a_(cm),最佳条件为系统在首程中初始和终末加速度相等即; aV~2=ω_0~2q(dm) (3)渐软弹簧情况:a_(cm)>a_(am)。 本文的基础是所谓“首程显峰”,假定即系统在速度冲击V下的响应峰值d_m和a_m出现在第一行程中。当平方阻尼值不太小,缓冲弹簧刚度特性接近反对称时,该假定成立。     

基于多场耦合的飞行器热环境数值分析方法研究

新一代高超声速飞行器的发展给防热设计问题带来严峻挑战。根据飞行器热环境多场耦合特性,提出了一种基于多场耦合的热环境数值分析策略,并在此基础上发展了基于Navier-Stokes方程的流场CFD分析程序,通过有效的界面数据传递算法,实现了与结构有限元热分析软件的耦合,形成了基于流场与结构耦合传热的飞行器热环境多场耦合数值分析方法。以典型圆管前缘为计算模型进行了程序验证,并对稳态和非稳态飞行环境下的流场与结构耦合传热特征和规律进行了数值分析研究。结果分析表明,该方法能够有效地刻画流场与结构之间的耦合传热特征和规律,预测和分析飞行器热环境的空间和时间分布特性,从而可为防热设计的选材和优化提供可靠的参考依据和分析手段。     

Flutter analysis of an airfoil with nonlinear damping using equivalent linearization

The equivalent linearization method （ELM） is modified to investigate the nonlinear flut- ter system of an airfoil with a cubic damping. After obtaining the linearization quantity of the cubic nonlinearity by the ELM, an equivalent system can be deduced and then investigated by linear flut- ter analysis methods. Different from the routine procedures of the ELM, the frequency rather than the amplitude of limit cycle oscillation （LCO） is chosen as an active increment to produce bifurca- tion charts. Numerical examples show that this modification makes the ELM much more efficient. Meanwhile, the LCOs obtained by the ELM are in good agreement with numerical solutions. The nonlinear damping can delay the occurrence of secondary bifurcation. On the other hand, it has marginal influence on bifurcation characteristics or LCOs.     

DOA estimation and mutual coupling calibration with the SAGE algorithm

In this paper, a novel algorithm is presented for direction of arrival（DOA） estimation and array self-calibration in the presence of unknown mutual coupling. In order to highlight the relationship between the array output and mutual coupling coefficients, we present a novel model of the array output with the unknown mutual coupling coefficients. Based on this model, we use the space alternating generalized expectation-maximization（SAGE） algorithm to jointly estimate the DOA parameters and the mutual coupling coefficients. Unlike many existing counterparts, our method requires neither calibration sources nor initial calibration information. At the same time,our proposed method inherits the characteristics of good convergence and high estimation precision of the SAGE algorithm. By numerical experiments we demonstrate that our proposed method outperforms the existing method for DOA estimation and mutual coupling calibration.     

齿轮-转子-滚动轴承传动系统的弯扭耦合振动

考虑齿轮啮合及扭转作用,建立齿轮-转子-滚动轴承传动系统的弯扭耦合非线性动力学模型.考虑输入/输出端、齿轮轴的弯曲/扭转振动等问题,推导了不平衡齿轮-转子-滚动轴承弯扭耦合的动力学微分方程.在考虑齿轮偏心和滚动轴承非线性接触特性的情况下,分析了转速、偏心量以及轴承游隙等参数对系统振动响应的影响规律.研究发现:由于弯扭耦合的作用,在主动轴中有着非常明显的从动轴转频成分.而在扭转振动中则各轴转频和啮合频率表现得更为清晰;滚动轴承有其自身的谐振频率,在系统设计阶段需要注意避开滚动轴承的变刚度频率对系统的影响;随着齿轮偏心量的变化对系统的时域和频域响应也有着很大的影响.另外,轴承游隙对系统的振动响应也有着较大影响,应选择合适的轴承游隙,以减小系统各处的振动幅值.