基于SRAM型FPGA单粒子效应综合防护技术

为解决基于SRAM(Static Random Access Memory,静态随机存储器)型FPGA(Field Programmable Gate Array,现场可编程门阵列)的扩频应答机在空间环境中时常发生功能故障的难题,提出了一种低轨卫星基于SRAM型FPGA的应答机的单粒子综合防护方案。该方案在代码级、器件级、单机级、整星级综合采用器件优选、结构屏蔽设计、巡检自愈、自主复位等多种方法,有效杜绝了单粒子事件带来的种种危害,已成功应用于某在轨卫星。在轨测试结果表明:遥测、遥控、跟踪测量等功能、性能指标满足任务要求,且未发生需要地面干预的问题或现象。该技术还可推广应用于其他采用低等级器件及其他类型FPGA、DSP(Digital Signal Processing,数字信号处理)等大规模集成电路的星载单机防护。     

摩擦焊设备振动油缸的性能分析

液压式摩擦焊设备是将电液伺服控制技术运用到摩擦焊接领域的一种先进设备。通过分析系统振动油缸的频率,找出影响频率的关键因素,深入分析这些因素对振动油缸伺服控制系统的影响,并利用AMESim仿真软件对该系统进行建模分析,验证了分析结果,并总结出改进系统的几点措施,为摩擦焊设备的设计改进提供了理论依据。。     

考虑真实气体效应的一维非定常平衡流的随机选取法计算

本文提出一种近似随机选取法,计算一维非定常的高温平衡流动。采用稀疏激波替代等熵稀疏波,选用拟合经验方程计算高温热力学性质,并利用切割迭代方法加快收敛,从而计算大为简化,并有很好精度。     

Vibration signal-based chatter identification for milling of thin-walled structure

In high speed milling aeronautical part, tool condition monitoring(TCM) is very important, because it is prone to get a chatter owing to the low stiffness of thin-walled structures. And the TCM is key technology for automated machining. In this paper, aiming to chatter monitoring in thin-walled structure milling, a variational mode decomposition – energy distribution(VMD-ED)method is proposed to improve the identification accuracy. And a moving average root mean square – mean value(MARMS-MV) ide...     

空间绳系组合体拖曳动力学分析及振动控制

空间绳系捕获系统捕获目标物后的组合体在拖曳离轨过程中常产生振动，为此，建立了切向连续推力作用下的空间拖曳绳系组合体面内动力学模型，并对模型进行了横向摆动与纵向振动耦合分析。针对组合体的纵向振动问题提出了一种以张力控制为内环、速度控制为外环的双闭环振动控制策略。进行了振动控制仿真分析，并根据动力学的相似性，建立地面模拟实验系统，仿真与实验结果表明该控制策略可迅速抑制组合体纵向振动、减小系绳冲击并可避免出现系绳松弛现象。     

Non-stationarity and cross-correlation effects in the MHD solar activity

The analysis of turbulent processes in sunspots and pores which are self-organizing long-lived magnetic structures is a complicated and not yet solved problem. The present work focuses on studying such magneto-hydrodynamic (MHD) formations on the basis of flicker-noise spectroscopy using a new method of multi-parametric analysis. The non-stationarity and cross-correlation effects taking place in solar activity dynamics are considered. The calculated maximum values of non-stationarity factor may become precursors of significant restructuring in solar magnetic activity. The introduced cross-correlation functions enable us to judge synchronization effects between the signals of various solar activity indicators registered simultaneously.     

Spatial transformation of general sampling-aliasing frequency region for rotating-blade parameter identification with emphasis on single-probe blade tip-timing measurement

Blade-health monitoring is intensely required for turbomachinery because of the high failure risk of rotating blades. Blade-Tip Timing (BTT) is considered as the most promising technique for operational blade-vibration monitoring, which obtains the parameters that characterize the blade condition from recorded signals. However, its application is hindered by severe undersampling and stringent probe layouts. An inappropriate probe layout can make most of the existing methods invalid or inaccurate. Additionally, a general conflict arises between the allowed and required layouts because of arrangement restrictions. For the sake of economy and safety, parameter identification based on fewer probes has been preferred by users. In this work, a spatial-transformation-based method for parameter identification is proposed based on a single-probe BTT measurement. To present the general Sampling-Aliasing Frequency (SAFE) map definition, the traditional time–frequency analysis methods are extended to a time-sampling frequency. Then, a SAFE map is projected onto a parameter space using spatial transformation to extract the slope and intercept parameters, which can be physically interpreted as an engine order and a natural frequency using coordinate transformation. Finally, the effectiveness and robustness of the proposed method are verified by simulations and experiments under uniformly and nonuniformly variable speed conditions.     

绳系卫星横向振动的控制方法

研究绳系卫星绳索横向振动问题。首先建立绳索振动方程,由Pontrgasin方法求得抑制绳索横向振动的纵向优化控制力。实现方式为开启母星体内的电机控制绳长使星体产生加速度,星体惯性力导致绳轴向附加张力。      

用整体传递矩阵法进行复杂转子机匣系统的应变能分析

提出了一种新的计算转子机匣系统动力特性的方法-整体传递矩阵法,并在此计算方法的基础上进行了系统应变能的计算和分析。整体传递矩阵法对于解决多转子（或机匣）相互耦合系统的问题有其独特的优点。通过分析系统应变能的分布情况可知转子的振动特性,从而确定如何采取减振措施。      

直升机旋翼载荷中的非线性强迫振动方程迭代算法

介绍用迭代方法求解直升机桨叶气动载荷中的非线性强迫振动方程。计算时,先假定诱导下洗已确定,求出桨叶的初始载荷;再通过非线性强迫振动方程求出弯－弯－扭弹性变形。以某一直升机为例,求出了桨叶的各阶谐波载荷和弹性变形。计算结果与实验数据吻合。