超燃冲压发动机带凹槽的燃烧室流场振荡研究

为了分析闭式凹槽的流场振荡现象,结合试验和二维非定常数值模拟方法,开展了三种条件下的非定常研究.通过实验发现,长深比较大的凹槽作为超燃冲压发动机火焰稳定装置时,凹槽的冷流流场存在强烈的振荡现象.结合二维非定常数值模拟方法,初步分析了振荡机理:振荡的主要原因是燃烧室入口气流马赫数的大小,马赫数2.0条件下,流场周期振荡;马赫数3.0条件下,流场可以稳定存在.根据分析结果给出了流场特征与马赫数的定性依赖关系.通过增加隔离段长度的方法对分析结果进行了验证.     

模拟空间环境下射流雾化特性实验

为了深入研究空间环境下液体工质的喷射雾化特性,搭建了空间环境模拟实验系统,综合研究了真空环境下饱和蒸汽压、喷嘴直径、雷诺数和溶气等对液体射流雾化特性的影响。试验结果表明:闪蒸是真空环境下射流雾化的主要因素,射流雾化过程中闪蒸强度主要由工质饱和蒸汽压决定;喷嘴直径主要通过三方面的影响对射流雾化起作用:流动状态、湍流强度和气泡生长周期;雷诺数对真空雾化的影响主要涵盖以下三点:出口速度、流动状态和闪蒸过程;溶气对射流雾化有明显的影响作用,影响途径是通过气泡的不稳定生长和微爆作用。     

某涡轮级三维流场非定常数值研究

基于耦合Lantry-Menter转捩模型的SST(Shear stress transport)湍流模型,对某涡轮级在3个雷诺数工况下的全三维流场分别进行了定常、非定常数值模拟,目的在于对比分析两种计算方法所得结果之间的差异。计算结果表明,进口雷诺数为4×104时和5×105时,定常与非定常计算的涡轮级效率的差异较大,最大相差0.6个百分点,而当雷诺数为8×104时,两者差异很小;非定常计算能够较好的模拟叶尖泄漏涡的发展过程、低雷诺数下上游尾迹与下游转子叶片吸力面分离边界层干涉诱导卷起涡的形成、输运及其所导致的叶片吸力面表面压力大幅波动等非定常流动现象。最后,给出了转子出口截面上周向与径向的非定常压力脉动的分布,为基于Lighthill声类比方法的计算气动声学研究奠定了基础。     

处理机匣激励频率对跨声速压气机性能的影响

通过改变处理机匣槽数来改变处理机匣对压气机内部流场的非定常激励频率,对4种激励频率下压气机性能进行了测试。实验结果表明,处理机匣槽数对应的非定常激励频率是影响压气机性能的关键因素之一。通过优化处理机匣对压气机非定常激励的频率,压气机性能可以得到全面提升:对于实验用跨声速压气机,在近设计转速下峰值效率、综合裕度和最大流量分别提高0.17%,19.86%和0.81%,而在低转速下这三个增量最大分别可达到1.13%,57.84%和1.57%。     

液氧甲烷发动机点火冲击特性研究

为研究液氧甲烷发动机燃烧室点火冲击特性及影响因素,根据爆轰波产生的机理,建立了甲烷推进剂液相蒸发数学模型,采用C-J（Chapman-Jouguet）爆轰理论,计算和分析了不同混合比、初温及初压对爆轰参数的影响规律。结果表明,爆轰波的强度与初压、初温及混合比密切相关。初压越高,初温越低,越接近化学当量混合比时,爆轰压比、温度比和爆轰速度越大;减小点火时刻推进剂积存量,增强燃烧装置点火能力,可降低爆轰波强度,减少点火瞬态冲击。     

航空发动机压气机内气液非平衡冷却特性研究

针对航空涡轮发动机来流雾化冷却对压气机内气动脉动的影响,考虑壁面液膜成形和运动,基于欧拉-拉格朗日多相流方法解析气液两相热质非平衡传输过程,应用快速傅里叶变换方法将压气机性能参数随旋转周期演变规律的时域脉动敏感性转化为频域功率谱密度的直观分析。结果表明,压气机内气液非平衡蒸发相变易诱发流场在时间和空间上非定常的气动脉动,雾化冷却参数与总温比成线性关系,而与总压比和效率均成非线性关系。在雾化量0.5%~5%和雾化平均粒径1~9 μm范围内,较低的雾化量或较小的雾化平均粒径时,时域总压比的脉动程度更大;在较低的雾化量或较大雾化平均粒径时,时域总温比的脉动程度更强;而在较高的雾化量或较大的雾化平均粒径时,时域效率脉动程度更高。同时,雾化冷却量变化对湿压缩过程中流场的时域脉动敏感性程度大于雾化粒径变化。     

1.5级大子午扩张涡轮非定常流动和传热特性分析

大子午扩张涡轮端壁二次流与热负荷之间的关系,对于端壁冷却非常重要。本文采用几何约化法,对某1.5级大子午扩张涡轮进行数值模拟,研究了大子午扩张涡轮上端壁非定常流动和传热特性。计算结果表明：大子午扩张涡轮上通道涡尺度较大且位置发生改变,沿径向向下移动约20%叶高;R1出口泄漏涡、通道涡和尾迹是造成S2流动和传热非定常性的主要因素;传热与二次流密切相关,对传热研究必须与流动相结合。研究结果将有助于提高对大子午扩张涡轮端壁非定常流动和传热特性的认识。     

High-speed unsteady flows past two-body configurations

This paper presents a detailed investigation of unsteady supersonic flows around a typical two-body configuration, which consists of a capsule and a canopy. The cases with different trailing distances between the capsule and canopy are simulated. The objective of this study is to examine the detailed effects of trailing distance on the flow fields and analyze the flow physics of the different flow modes around the parachute-like two-body model. The computational results show unsteady pulsating flow fields in the small trailing distance cases and are in reasonable agreement with the experimental data. As the trailing distance increases, this unsteady flow mode takes different forms along with the wake/shock and shock/shock interactions, and then gradually fades away and transits to oscillate mode, which is very different from the former. As the trailing distance keeps increasing, only the capsule wake/canopy shock interaction is present in the flow field around the two-body model, which reveals that the unsteady capsule shock/canopy shock interaction is a key mechanism for the pulsation mode.     

Suppressing unsteady motion of shock wave by high-frequency plasma synthetic jet

Three Plasma Synthetic Jet Actuators (PSJA) under the high-frequency actuation are used to control the Shock Wave Boundary Layer Interaction (SWBLI), a high-speed schlieren image processing method based on spatial Fourier transform as well as snapshot proper orthogonal decomposition were used to study the control effect of high-frequency plasma synthetic jet on low-frequency unsteadiness of SWBLI. The analysis of the base flow shows that the separated shock wave actually has both large- and small-amplitude vibrations at low frequency. And the results revealed that the PSJA with an operating frequency of 2 kHz has the ability to reduce the energy of low-frequency component of shock wave motion, indicating that the 2 kHz actuation can effectively suppress low-frequency unsteadiness of the separated wave. Compared with the actuation frequency of 2 kHz, the energy of low-frequency component of the shock wave is enhanced under the 8 kHz actuation, which aggravates the low-frequency unsteady motion of the shock wave. It is likely that the actuation frequency is too high, thus the intensity of the precursor shock wave induced by PSJA becomes weaker. Additionally, as the 4 kHz actuation is applied, the pulsation of the separation region was enhanced, it is speculated that the actuation frequency is coupled with the oscillation frequency of the separation region.     

火箭低空级间热分离初期流场特性数值模拟

采用耦合求解轴对称非定常NS方程与一维分离动力学方程的方法,对多级火箭低空级间热分离初期过程进行数值仿真。依据仿真结果描述低空级间热分离初期流场的两种典型结构：内部为喷管扩张段流动分离以及外部为级间缝隙横向喷流与超声速外流的干扰流场;给出两种典型流场结构中位于上面级弹体表面（喷管内）的流动分离点位置以及壁面压力分布随仿真时间的变化;初步估算流动分离线偏斜时内外流动分离区域对上面级弹体的干扰力矩。通过分析数值模拟与力矩估算结果,发现在低空级间热分离内外流场中流动分离激波后方形成的高压区域是上面级所受干扰力矩的重要来源。研究结论可为级间热分离过程干扰机理研究提供理论方向,为级间热分离时序设计提供参考。