炉渣滤床技术处理亚麻生产废水

为了确定处理包头亚麻厂亚麻生产废水的设计方案，设计之前在现场进行了生产试验。在包头亚麻厂污水处理站，模拟炉渣滤床制造了3米高的炉渣滤层，滤渣从工厂锅炉房取用，将实际排放的亚麻煮漂车间、细纱车间、粗纱车间的生产废水混合后，通过炉渣滤层过滤处理，处理后出水由厂化验室和包头环保局化验。试验结果表明，处理后的排水各项指标完全达到国家排放标准。该工艺处理费用低，运行效果稳定，管理简便，具有明显的经济效益、环境效益和社会效益。     

CFG桩复合地基应力比数值分析

本文采用有限元ANSYS程序对CFG桩复合地基的单桩桩体荷载传递规律、应力比及影响因素进行了分析,得出了减小应力比的方法和措施,对工程可起借鉴的作用。     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

Two years of INTEGRAL observation of the BHC IGR J17464-3213

On March 2003, IBIS, the γ-ray imager on board the INTEGRAL satellite, detected an outburst from a new source, IGR J17464-3213, that turned out to be an HEAO-1 transient, namely H1743-322. The spectral and temporal evolutions of the source were observed by INTEGRAL in different periods. Also RXTE observed the source for the first time on 2003 March 29 during a PCA Galactic bulge scan. The source flux decayed below the RXTE PCA sensitivity limit in November 2003, then in April 2004 it was again detected by INTEGRAL. On July 3, 2004 the source was again detected by RXTE/PCA at a 2–10 keV intensity of 16 mCrab and on July 7, reached 69 mCrab. Recently, a new outburst was observed on August 2005. We briefly summarise here the behaviour of the source observed by INTEGRAL from March 2003 to August 2005. The new outbursts of the source and the analysis of all the data collected (now public) give a global view of the spectral and time behaviour of this X-ray transient.     

对“ZY-1”FM1整星热平衡、热真空试验中有效载荷被污染情况的分析

介绍了卫星在热平衡试验后所发现的有效载荷的污染情况,通过对污染提取物的分析和试验设备的再次污染监测,找出了污染源,并对以后的防污染工作提供了借鉴.     

400kN振动台承力钢架的研制

文章中介绍的400kN 承力钢架是用来作船罩联合试验的承力机构,具有结构庞大、复杂的特点,对自振频率有一定要求,文章介绍了该设备研制过程中的设计、计算、加工及安装工艺技术等。     

液相色谱仪故障分析与处理

简述了液相色谱仪工作原理，对常见故障进行了分析，并给出了处理方法。     

VO2薄膜制备工艺及电阻开关特性研究

用溶胶－凝胶法在非晶玻璃上制备VO2薄膜，经过熔融、涂膜、烘干和热处理等工艺最后得到电阻相变2－3个量级的VO2薄膜。对烘干温度、熔融温度、膜厚和热处理温度对薄膜电阻开关特性的影响进行了研究。通过XRD（X－ray diffraction)和XPS（X－ray photoelectron spectroscopy）对薄膜的结构和价态进行分析，表明用溶胶－凝胶法制图VO2膜工艺简单，重复性好。     

Kilohertz quasi-periodic oscillations in SAX J1808.4–3658

I present a short overview of the behavior and properties of the two simultaneous kilohertz quasi-periodic oscillations (kHz QPOs) seen in the accreting millisecond X-ray pulsar SAX J1808.4–3658. I will focus on the behavior of the upper frequency QPO as a function of time and count rate as seen during the 2002 outburst of this source. I will also discuss briefly the correlated behavior of this QPO with QPOs at lower frequencies (several tens of hertz).     

基于有限元法的隧道荷载模型位移反分析

介绍了一种以荷载模型为求解对象的位移反分析法。它是以通用有限元软件为实验平台，利用隧道位移实测值建立荷载灵敏系数方程，根据最小二乘法原理反求隧道模型的荷载，再将正分析结果和实际值进行对比分析井重新调整隧道荷载模型，最终获得较为符合实际的隧道荷载模型。该方法的优点是既考虑了岩土松动荷载效应又能体现支护结构与周围岩土体的共同作用，且具有较好的操作性。