多层隔热材料的性能研究

本文从多层隔热材料的实际应用条件出发,研究了它们在几种层密度下的隔热性能,特别包括了在层密度较高情况下的性能。为了改善多层隔热材料的隔热性能,采用了间隔几层隔离层的组合形式。压缩负荷对层密度、隔热性能的影响也进行了初步的研究。     

Numerical simulations of water spray on flame deflector during the four-engine rocket launching

This paper aims to study on the cooling effect with two types of water spray nozzle on the flame deflector during the four-engine launch vehicle take-off. To accurately simulate the two-phase flow of the rocket gas with multispecies and the water spray, the three-dimensional compressible Navier-Stokes equations, discrete ordinates methods and realizable k-Ɛ turbulence model are used to establish the rocket supersonic plumes impact model. The Eulerian dispersed phase (EDP) model was used to simulate the water spray into the exhaust gas. The accuracy and effectiveness of the gas-liquid flow model are verified by a good agreement between simulation results and experimental data. On this basis, a series of numerical simulation studies under different water injection position are performed. The results show that the high temperature regions, along the axis of engines on the deflector plate, have no significant temperature decreasing effect by water spray from the nozzles mounted on the apex of the deflector, and the high temperature converts a large quantity of water into vapor near the plume boundary, which would decrease the flow conductivity. With the cooling spray nozzle fixed directly to the deflector plate, the temperature decrease effect is obvious and the effect of thermal shock on deflector plate induced by exhaust plume is reduced, so that it can prevent the flame deflector from thermal ablation. The study results provide indepth information and engineering guidance for designing the water spray systems and increasing the safety of the launch process.     

Prediction of shock-layer ultraviolet radiation for hypersonic vehicles in near space

A systemic and validated model was developed to predict ultraviolet spectra features from the shock layer of near-space hypersonic vehicles in the ‘‘solar blind" band region. Computational procedures were performed with 7-species thermal non-equilibrium fluid mechanics, finite rate chemistry, and radiation calculations. The thermal non-equilibrium flow field was calculated with a two-temperature model by the finite volume technique and verified against the bow-shock ultra-violet(BSUV) flight experiments. The absorption coefficient of the mixture gases was evaluated with a line-by-line method and validated through laboratory shock tube measurements. Using the line of sight(LOS) method, radiation was calculated from three BSUV flights at altitudes of 38,53.5 and 71 km. The investigation focused on the level and structure of ultraviolet spectra radiated from a NO band system in wavelengths of 200–400 nm. Results predicted by the current model show qualitative spatial agreement with the measured data. At a velocity of 3.5 km/s(about Mach11), the peak absolute intensity at an altitude of 38 km is two orders of magnitude higher than that at 53.5 km. Under the same flight conditions, the spectra structures have quite a similar distribution at different viewing angles. The present computational model performs well in the prediction of the ultraviolet spectra emitted from the shock layer and will contribute to the investigation and analysis of radiative features of hypersonic vehicles in near space.     

A time-frequency analysis of the thermal radiation background anomalies caused by large earthquakes: A case study of the Wenchuan 8.0 earthquake

Strong earthquakes have an impact on the regional thermal radiation background, which has been both observed and confirmed. This effect produces anomalies in the thermal radiation background (TRBA) and increases the difficulty of extracting a thermal radiation anomaly (TRA) that is associated with an earthquake occurring during the same time period. The extraction and identification of such anomalies has been ignored by previous studies. In this study, we investigate the time-frequency analysis (TFA) method, together with the wavelet filtering of the Daubechies method and the relative power spectrum analysis of the Fourier Welch method to extract and analyse the TRBA caused by the 2008 Wenchuan Ms 8.0 earthquake and the TRA of the 2013 Minxian-Zhangxian Ms 6.6 earthquake using data concerning the brightness temperature of a black body (TBB) from the Fengyun-2 series of geostationary meteorological satellites developed by China. The result showed that this method can effectively extract and analyse the TRBA caused by the Wenchuan earthquake and the TRA of the Minxian-Zhangxian earthquake form a complex background environment. Furthermore, we discussed the impact of the earthquake on the TRBA and segmented the process. The impact is mainly reflected by three aspects; the characteristic period of the TRBA changes, the TRBA occurs at the same time every year, which is identical to the time at which the earthquake anomaly occurred, and the impact process is in stages. We also summarized the correlation between the characteristic parameters of a TRA and the regional thermal radiation background, geography, and climatic factors.     

高空飞行环境中液体运载火箭底部热环境研究

采用数值模拟和飞行测试验证相结合的方法对液体运载火箭高空对流/辐射耦合换热问题开展系统深入研究。基于燃气多组分输运Navier-Stokes方程、热辐射方程、Realizable k-ε两方程湍流模型，建立了高空含自由流的运载火箭燃气喷流流动模型。辐射模型采用离散坐标法(DOM)，空间离散采用二阶迎风TVD格式，对多个典型飞行高度火箭底部热流进行大型并行计算，将数值结果与试验数据进行广泛对比，验证了计算模型的精度和有效性。数值研究表明，火箭底部辐射热流在刚起飞阶段达到最大值，随着飞行高度上升，辐射热流逐渐降低，火箭底部对流热流表现为先升高后降低的趋势，并在20 km高空达到峰值。本文的预测分析方法对液体运载火箭底部热防护设计具有重要的理论意义和工程应用价值。     

高性能纤维增强树脂基复合材料3D打印及其应用探索

纤维增强树脂基复合材料具有优异的力学性能,能够实现轻质、高性能结构的制造,但传统的成型工艺过程复杂、成本高,难以实现纤维回收利用,限制了纤维增强树脂基复合材料的广泛应用.3D打印技术是一种新兴的零件成形工艺,将3D打印技术应用于纤维增强树脂基复合材料的制造,为实现复合材料低成本、绿色制造提供了可能性.综述了纤维增强树脂基复合材料3D打印技术研究的发展现状,提出了一种高性能连续纤维增强热塑性复合材料3D打印工艺及其回收再制造策略.     

航空表面涂层技术的应用与发展

航空表面涂层技术是航空制造技术的重要组成部分,涂层材料与涂层制造技术创新对提高航空零部件产品性能、降低能源消耗、提升产品可靠性及服役寿命具有重要意义.主要对涉及航空工业领域热障涂层、复合材料表面环境障涂层、高温可磨耗封严涂层及纳米涂层技术的应用现状与研究进展进行了阐述.     

深冷组合循环发动机吸气模态循环分析与设计可行域研究

为了研究类似SABRE3结构的深冷组合循环发动机,建立了基于部件法的发动机设计点热力学计算模型,提出了发动机氦循环新的循环效率和循环特征参数的定义。考虑发动机参数的物理限制条件及不同工质循环之间的相互影响,求解得到了空气路、氦气路重要参数的设计可行域。在可行域内开展了空气路和氦气路的循环分析,获到了冷却当量比、性能参数等主要参数的分布结果。结果表明:此发动机空气热功转换比ηt2为0.02～0.746。氦循环设计可行域受ηt2及换热器热负荷限制;循环起始温度和热负荷限制确定的情况下,ηt2越低氦循环可行域越窄。降低发动机冷却当量比的关键是:提高换热器1的氦出口温度以降低氦流量;当换热器1和换热器2的氦出口温度同时取得最大值时,冷却当量比取得最小值。换热器1和2的氦出口温度分别取1200K和1300K时,空气路可行域内冷却当量比为0.917～2.64。     

先进的热防护方法及在飞行器的应用前景初探

随着航天技术的发展,飞行器的热环境面临着新的变化,对热防护提出了挑战。对各类主动热防护方式的原理、研究进展和应用现状进行了归纳总结。结合飞行器未来发展,提出了适应于未来应用的基于相变工质的对流冷却、自适应膜相变冷却和发汗冷却的系统性主动热防护方式。并以此为基础,提出了结合被动、半被动和主动热防护的飞行器全时域综合热管理思路。