材料特性对热障涂层合理压入深度的影响

基于有限元计算方法和量纲分析原理提出了热障涂层合理压入深度的确定方法,并研究了涂层及基体材料特性对合理压入深度的影响.首先,根据量纲分析原理提出了合理压入深度的无量纲表达式;其次基于锥形压头识别理想弹塑性材料的材料特性的方法,提出合理压入深度的确定方法;最后研究了各无量纲因素对合理压入深度的影响.研究发现基体的弹性模量对合理压入深度的影响最大,粘结层材料特性的影响较大,热氧化生成层的材料特性及基体的屈服极限对合理压入深度的影响不大.     

大型星载天线桁架式可折展机构的模态分析

大型空间抛物柱面星载天线具有口径大、约束弱、刚度低、质量小等特点,其机构的空间稳定性直接决定天线的使用寿命和信息传输的可靠性。为准确获得大型空间星载天线在轨稳定性能参数,依据星载天线的高精度和长寿命的设计需求,提出一种新型抛物柱面星载天线结构形式,利用有限元仿真对该新型星载天线作模态分析,并分析相关参数。结果表明:采用Al7075材料的新型抛物柱面星载天线基频满足设计要求。同时,增加上下支杆和上下斜撑杆的截面尺寸可有效提高天线结构的固有频率。该研究为我国大型抛物柱面星载天线设计提供了理论支撑和技术参考。     

天基信息支援对导弹攻防作战的效用分析

分析了空天一体作战天基装备系统——军事卫星,对导弹攻防作战重要的信息支援效用。建立并阐述了天基军事卫星信息系统信息支援下导弹攻防作战过程模型和影响图模型,对模型进行了详细的分析讨论。     

达布定理的推广与柯西中值定理的一个新证明

本文推广了达布定理,並用它给出了柯西中值定理的一个新证明。     

超高强铝合金LC9的超塑性研究

工业牌号超高强铝合金LC9经过两种不同方式的预处理后,在一定的温度和应变速率范围内呈现出良好的超塑性。材料经过形变热处理(TMT)后,在最佳超塑性条件下拉伸(T_(TMT)=515℃,ε_(TMT)=1.66×10~(-3)s~(-1)),获得很高的延伸率δ_(TMT)=1300％,低的流变应力σ_(TMT)=1.7MPa和高的应变速率敏感性指数m_(TMT)=0.66。经过简单锻造预处理后,在最佳超塑条件下(T_f=405℃、ε_f=1.66×10~(-3)s~(-1)),材料仍能获得δ_(f)=380％、σ_(f)=16MPa、m_(f)=0.3。TMT预处理中,η相粒子分布状态对获取微细组织起着决定性作用,η相的回溶降低了材料的空洞敏感性,抑制试样早期断裂。经过两种方式预处理的试样超塑性断裂形式分别为空洞型失稳断裂和颈缩型稳定断裂。     

关于热量与质量传递的湍流模式问题

本文发展了一个新的热量与质量传递的标量—压力相关模式。讨论了局部平衡湍流的标量脉动与速度脉动相关。同时将所得理论结果和自由射流中关于温度脉动的测量数据进行了比较。     

对影响无人机转动运动的两个因素的分析

陀螺力矩是在高速旋转的发动机转子和无人机的转动运动相互作用下产生的。在它的作用下,无人机在不同方向上的转动运动交连起来,共同影响无人机的飞行姿态。转动惯量是决定无人机的转动运动的另一个因素。本文着重研究了陀螺力矩在无人机几个特殊的飞行段落内对无人机转动运动的影响和燃料量以及无人机姿态角变化造成的燃料分布变化对无人机转动惯量以及转动运动的影响。     

Cost-driven design of small satellite remote sensing systems*

Earth remote sensing (alongside communications) is one of the key application of Earth-orbiting satellites. Civilian satellites in the LANDSAT and SPOT series provide Earth images which have been used for a vast spectrum of applications in agriculture, meteorology, hydrology, urban planning and geology, to name but a few. In the defence sector, satellite remote sensing systems are a critical tool in strategic and tactical planning – for the countries which can afford them. To date, remote sensing satellites have fallen into one of these two categories: military missions driven by the requirement for very high resolution and orbital agility; and multipurpose civil satellites using general purpose sensors to serve a diverse community of end users. For military-style missions, the drive to high resolution sets the requirements for optics, attitude control and downlink data bandwidth. For civil missions, the requirement to satisfy multiple, diverse user applications forces compromises on spectral band and orbit selection. Although there are exceptions, many small satellite remote sensing missions carry on in this tradition, concentrating on ultra high resolution products for multiple user communities. This results in satellites costing on the order of US $100 M, not optimised for any particular application. This paper explores an alternative path to satellite remote sensing, aiming simultaneously to reduce cost and to optimise imaging products for specific applications. By decreasing the cost of the remote sensing satellite system to a critical point, it becomes appropriate to optimise the sensor's spectral and temporal characteristics to fit the requirements of a small, specialised user base. The critical engineering trade-off faced in a cost driven mission is how to reduce mission cost while still delivering a useful product to the selected user. At the Surrey Space Centre, we have pursued an engineering path using two dimensional CCD array sensors, commercial off-the-shelf lenses and gravity-gradient stabilised microsatellites. In spite of the inherent limitations of such systems, recent successes with the Thai Microsatellite Company's Thai-Phutt satellite show that a system costing in the region of US $3 million, can approach the spectral and spatial characteristics of LANDSAT. Surrey's UoSAT-12 minisatellite (to be launched April, 1999) will further develop this cost-driven approach to provide 10 m panchromatic resolution and 30 m multi-spectral resolution. This paper describes the Thai-Phutt and UoSAT-12 imaging systems, explaining the engineering methods and trade-offs. Although Surrey is presently the only centre presently pursuing such implementations, our paper shows that they deserve wider consideration.     

攻角传感器的热失效分析与设计方案改进

根据压差归零式攻角传感器的工作原理、结构及工作条件，结合实际经验，分析了该传感器的主要失效因素，并重点分析了热失效问题；探讨了飞行中传感器探头加热器与环境之间的热交换情况。     

凝胶点官能度是重均官能度,还是数均官能度

Flory和Stockmayer等的凝胶化理论用重均官能度表示凝胶点或凝胶生成的临界条件,虽已有50多年的历史,并为各国学者所公认,但从分析凝胶点定义的物理意义出发,只要用简单的数学分析,即可证明用重均官能度而不用数均官能度表示凝胶点,与反应程度定义的物理意义和Flory的两个基本假设不符。凝胶化理论新概念用数均官能度表示凝胶点,则不存在不符的问题。