Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method

Repeated Unit Cell(RUC)is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element(DFE)method,and merely applying Periodic Displacement Boundary Conditions(PDBCs)to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions(PTBCs,also known as traction continuity conditions)are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element(FE)analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional(UD)fiber-reinforced composites.     

爆震燃气轮机的变比热容热力循环性能

为分析变比热容下爆震燃气轮机的热力循环性能,建立了考虑比热容随工质成分及温度变化的爆震燃气轮机热力循环模型,分析中同时考虑了压气机、燃烧室、透平等部件的效率.在不同比较条件下,利用变比热容法对比分析研究了燃气轮机爆震循环(DCGT)、Brayton循环和Humphrey循环燃气轮机的热力循环性能.计算结果表明:与Brayton循环相比,DCGT具有较大性能优势;在透平前温度为1620K且压比为16.5时,DCGT热效率较Brayton循环高28.8%;在无量纲吸热量为4.25且压比为16.5时,DCGT热效率则较Brayton循环高30.7%.      

盘腔进气位置对径向预旋系统的影响

为减少径向预旋系统的流动损失,运用数值模拟方法对不同盘腔进气位置的径向预旋系统进行分析,结果表明:随着盘腔进气径向位置的增加,预旋喷嘴出口气流旋流比随之逐渐减小,径向预旋系统的温降系数及总压损失系数均随之逐渐增大。当旋转雷诺数等于7.9×106,盘腔进气位置由低位向高位变化时温降系数最大可增加525%,同时总压损失系数增加3.93%。径向预旋系统内比熵增主要发生在预旋喷嘴和共转腔,约占系统总体比熵增的80%。随着盘腔进气径向位置的增加,径向预旋系统总体比熵增降低,预旋喷嘴比熵增占比逐渐增大,共转腔比熵增占比逐渐减小。     

面向一体化计算的整体式液体冲压发动机建模及性能评估

为发展冲压发动机性能工程预估方法,建立了面向一体化计算的整体式液体冲压发动机性能计算模型,并使其兼容基团贡献算法,提高了拓展性。利用模型分析了冲压发动机在攻角0°～6°、高度0～18km、马赫数2.0～3.5、余气系数1.0～2.9范围工况多维度连续变化下,比冲、推力系数和燃油质量流量的速度-高度特性、高度-节流特性、节流-速度特性以及攻角特性。研究结果表明:性能计算模型可在一体化计算条件下、基团贡献算法允许范围内,不依赖试验数据对冲压发动机性能预估,计算结果与技术参考值相比相对误差均小于14%。推力系数和比冲具有基本一致的速度-高度特性和相似的高度-节流特性,受燃气组分影响,推力系数和比冲的节流-速度特性差异明显。燃油质量流量的变化规律不同于比冲和推力系数,在进入平流层后呈现折缓趋势,而呈现连续性,速度越大、高度越低、余气系数越小,燃油质量流量越高,反之则越小。引入攻角以后,攻角越大,比冲和推力系数越低,进气道起动马赫数越高;攻角-起动马赫数曲线小范围内近似线性,攻角超过5.6°非线性加剧。     

Reachable domain of spacecraft with a single tangent impulse considering trajectory safety

The reachable domain of the two-body transfer orbit with a single upper-bounded tangent impulse is studied. Three cases are analyzed for either the magnitude of the tangent impulse or the initial impulse point being free, or both being free. For a fixed impulse magnitude and a free initial impulse point, the initial orbit is proved to be one of the envelopes of the reachable domain. Moreover, the trajectory safety for the transfer orbit requires a lower bound on the perigee altitude and an upper bound on the apogee altitude. Then the ranges of the impulse magnitude and the initial true anomaly can be obtained by solving quadratic and cubic inequalities, respectively. If both constraints are required for an arbitrary impulse point, the range of the impulse magnitude is obtained with impulses at the perigee and the apogee. Several numerical examples with different eccentricities are provided to show the geometry of the reachable domain and to verify the proposed method.     

使用ASIC芯片实现高清视频编码的设计

本文以高清视频编码为切入点,首先介绍了一款高性能的视频编码ASIC芯片FH8735,然后通过对视频编码设备整体框架的设计介绍,引入了视频编码设备的硬件原理设计方案和软件设计方案,硬件设计方案以不同输入视频格式的种类为章节详细叙述了几种常用视频编码的原理设计,软件设计方案从软件架构和软件流程上对视频编码设备软件进行了讨论。可以看出,ASIC芯片以其独有的优势使得视频编码设备设计越来越简单、功能越来越强大、性能越来越可靠。     

多加速度计振动分离惯性补偿测力技术

为解决在高超声速脉冲风洞中进行大长细比等特殊模型测力实验所面临的惯性补偿问题,笔者提出了多加速度计振动分离惯性补偿方法。这一方法应用在长细比达20 :1 的模型气动力实验中,得到了较为理想的实验结果     

系统辨识的计算机辅助设计实现

探讨了通过脉冲响应法来求取被识别系统的传递函数的过程,给出了计算公式,最后利用MATLAB对计算过程进行了可视化的编程实现。     

A theoretical method for solving shock relations coupled with chemical equilibrium and its applications

In this study, a theoretical method is proposed to solve shock relations coupled with chemical equilibrium. Not only shock waves in dissociated flows but also detonation waves in combustive mixtures can be solved. The global iterative solving process is specially designed to mimic the physical and chemical process in reactive shock waves to ensure good stability and fast convergence in the proposed method. Within each global step, the single-variable equations of normal and oblique shock relatio...     

蓄热式太阳能热光伏-热推进双模系统换热特性数值模拟研究

本文通过三维数值模拟研究蓄热式太阳能热光伏-热推进双模系统的蓄/释热特性和推进性能。在蓄热式太阳能热推进系统工程模型的基础上,通过射线光学的光路分析验证了聚光器设计的合理性,并获得吸热腔壁面能量分布情况,进一步研究了相变蓄热过程的影响因素。基于场协同原理对热光伏再生冷却结构进行了优化设计,使热光伏具有较好的散热特性,提高发电功率;通过整机流动换热仿真,分析了工质流体在推进器内部的换热情况,计算结果表明,蓄热式热推进器具有达到734s比冲和0.9N推力的推进性能,以及能够满足日蚀区微小卫星的供电和推力需求。