机载小惯量探针研制及在飞机武器发射中的应用

介绍了一种用于飞机武器发射时测量发动机进口动态温升时序的机载小惯量探针,以其独特的研制方法,较好地解决了机载小惯量测温装置、频响与可靠性兼顾这一测试难题,并在武器发射时,成功地用来评价发动机工作稳定性的影响。     

启动过程推力器喷注管内推进剂流的温降

根据空间发动机的总体结构、环境特点和能量守恒原理,提出推进剂在推力器喷注管内流动降温的简化数理模型,研究启动时单元推进剂在推力器喷注管内的流动降温现象.耦合求解推进剂流和喷注管能量方程,可以获得单元推力器喷注管单推三流整体温度的沿程分布规律.用推进剂模拟液实际考察和验证推力器喷注管的流动特点和理论模型的计算结果,分析推进剂流速、喷注管长度和内径对推进剂流温度变化的影响,导出推进剂流前缘出口温度和这3个物理参量间的拟合关系式.研究结果对推力器的热控设计有参考价值.     

一种基于P2P MMOG的分布式消息分发算法

提出了一种适合于P2P MMOG的分布式消息分发算法。游戏世界通过N-Tree划分为若干个子区域,并从每个子区域中选举出一个协调者节点。对于区域内玩家交互过程中产生的事件,由该玩家通过多播机制发送给其兴趣域中的其他玩家和区域协调者,协调者仅负责保存区域内的对象的状态信息并周期性的进行更新。实验表明该算法能够满足游戏状态的一致性需求,并且能够在较大的程度上降低协调者负载和通信开销,节省了大量的计算资源和宝贵的带宽。     

用一种新型焊丝焊接TC18钛合金的接头性能与组织研究

对采用研制的焊丝和采用TC18同质焊材钨极氩弧焊焊接TC18钛合金的接头力学性能及微观组织进行了对比研究,结果表明:采用同质焊材焊接TC18钛合金只能保证接头的强度指标,而采用研制的新型焊丝焊接TC18钛合金,可以保证接头具有优良的综合力学性能.     

添加剂含量对二硅化钼发热体抗氧化性能的影响研究

研究了添加剂含量对MoSi2发热体性能的影响,使用SEM观察各种添加剂含量试样的微观组织,测定各种添加剂含量试样的氧化动力学曲线、致密度、烧损温度。     

Microstructure and Martensitic Transformation Behaviors of Explosively Welded NiTi/NiTi Laminates

The study is a first attempt to prepare bulk NiTi/NiTi shape memory alloy (SMA) laminates with a macroscopic heterogeneous composition by explosive welding and investigate their microstructures and martensitic transformation behaviors. After explosive weld- ing, a perfect interfacial bonding between the two components and a reversible martensitic transformation are realized in the tandem. Results show achievement of a fine granular structure and the maximum value of microhardness near the welding interface because of the excessive cold plastic deformation and the high impact velocity during the explosive welding. Meanwhile, the effects of aging on the transformation of the welded tandem are investigated by differential scanning calorimeter (DSC) and subject to discussion. The trans- formation temperatures of NiTi/NiTi SMAs increase with the rise of the aging temperature. The experimental results indicate the shape memory properties of NiTi/NiTi SMA fabricated by explosive welding can be improved by optimizing the aging technology.     

Electrolytic Passivation of Nitinol Shape Memory Alloy in Different Electrolytes

The corrosion behavior of the nitinol alloy was studied in various corrosion media of different Cl–ion concentrations. The results demonstrate that the Cl–ion concentration has significant influences on the corrosion behavior of the nitinol alloy. In order to enhance the corrosion resistance, protective films were generated on the surface of the nitinol alloy by means of the electrochemical passivation method, for which five different electrolytic solutions were investigated. The surface analysis indicates full growth of all samples pas-sivated in the different electrolytic solutions with layers, however, showing different morphological features. Without any defects like micro-cracks and pores, the surface of the samples passivated in the molybdate solution turns out smoother and denser than those pas-sivated in other solutions. It is shown that the electro-chemical passivation will reduce Ni content but increase Ti content in the surface, reaching the Mole ratio of Ti:Ni=9.01:1 on the outermost surface. Potentiodynamic polarization test demonstrates that the samples electrochemically passivated in the molybdate solution present a significant increase in breakdown potential due to titanium enrichment on the outermost surface.     

一种室温固化耐热环氧胶粘剂的研究

通过用双酚A型环氧与高官能度环氧组成混合环氧树脂、脂肪胺与芳香胺组成混合胺类固化剂以及用大分子聚醚胺进行增韧的途径,研制了一种可室温固化耐热200℃的胶粘剂.     

应用ART1神经网络仿真车间分组

阐述了ART1神经网络在制造单元设计过程中形成零件族的基本方法,并在基于MATLAB的软件平台上,利用其神经网络工具箱对生产过程中的实际情况进行了仿真和应用。     

耐高温聚苯硫醚复合涂层性能的研究

主要讨论增韧材料对PPS性能的影响和各种填料用量对PPS复合涂层的附着力、抗冲击强度等性能的影响以及PPS复合涂层的耐高温性能。结果表明：增韧树脂PEK－C的加入可提高PPS共混树脂的力学性能；共混树脂中加入5％的石墨、10％TiO2时，可获得综合性能良好的复合涂层。