B737NG飞机反推系统故障分析

根据波音的相关技术文件,B737NG反推系统的部件有些本身带有设计缺陷或可靠性较低,导致反推系统故障较多。对反推系统的工作原理、常见故障及处理方法进行总结,使排故人员和故障管控工程师对该系统有深入的了解,方便大家开阔思路,减少排故的时间,提高排故效率。     

基于到达流特性的跑道容量分析

现有机场的容量已不能满足当前航空运输的需求,如何最大限度地发挥机场的运行能力,增加其跑道容量成为亟待解决的问题。给出跑道容量的具体定义以及影响跑道容量的诸多因素,其中连续着陆飞机之间间隔的数量和间隔的大小是影响跑道容量的最大因素。假定机场到达流特性是韦布尔分布或正态分布,采用T型系统推导跑道容量计算模型,并分析了各到达流分布计算模型之间的相互关系。应用模型计算的某机场跑道容量基本符合实际状况。     

使用T3Ster对宇航电子元器件内部热特性的测量

文章介绍了使用MicReD公司的热测试仪33Ster测量元器件内部热特性的方法。T3Ster测试仪可以测试各类IC、LED、散热器、热管等电子器件的热特性以及PCB、导热材料等的热阻、热客及导热系数、接触热阻等热特性。使用33Ster测试仪对某航天器用电子元器件内部热特性进行了测量,并与器件资料中的热特性数据进行比对,二者相对误差为0．07％,验证了q3Ster测试仪具有测试高可靠度要求的宇航级电子元器件热特性的能力。为宇航电子元器件的热设计与热分析提供重要的试验依据。     

一类具有时滞和饱和传染率的HIV病理模型的稳定性分析

本文研究了一类具有饱和传染率、治愈率和细胞内时滞的HIV病理模型。通过分析特征方程的特征根的分布情况,给出了正平衡点的存在性、绝对稳定和条件稳定的条件。在正平衡点条件稳定时,给出了正平衡点保持稳定的时滞长度。     

一类具有时滞和饱和传染率的HIV病理模型的稳定性分析

本文研究了一类具有饱和传染率、治愈率和细胞内时滞的HIV病理模型。通过分析特征方程的特征根的分布情况,给出了正平衡点的存在性、绝对稳定和条件稳定的条件。在正平衡点条件稳定时,给出了正平衡点保持稳定的时滞长度。     

2A12-T4铝合金零件去应力处理工艺研究

针对2A12-T4铝合金薄板类零件在加工过程中,采用110℃保温6小时去应力处理后,对材料硬度略有升高的现象进行了不同参数的工艺试验,试验结果表明在240℃～260℃范围内加热4～6小时的去应力处理,既可降低材料硬度HRB4～7,又能满足设计要求的强度指标,对降低零件机械加工切削力、减小零件残余应力是十分有利的。     

任意K元Huffman树的新构造

给出了一种简单而有效地构造任意k元最优Huffman树的新方法。给出了Huffman村存贮的父母一子女环结构,该结构空间利用率高,在不增加parent域的情况下,使查找父母的T（m）达到O（1）,并能高效实现建立最优Huffman树和求Huffman编码的算法,无论是空间复杂度还是时间复杂度均优于传统算法,具有很强的实用性。     

Scheme design of the CHANG’E-5T1 extended mission

Flight schemes for the CHANG’E-5T1 extended mission are investigated in this paper. In the flight scheme and trajectory design, the remaining propellant of the CHANG’E-5T1 mission is utilized. The CHANG’E-5T1 mission is firstly introduced with feasible flight goals derived based on the terminal trajectory and satellite status. The flight schemes are designed to include a lunar return and the libration points in the Sun-Earth/Moon and Earth-Moon systems, with an emphasis on the Earth-Moon triangle libration point thus far unexplored. Secondly, three schemes are proposed for the CHANG’E-5T1 extended mission with different flight goals. The direct libration point orbit transfer and injection method is adopted to solve the issue in the transfer trajectory design. Furthermore, an innovative concept is proposed to transfer from the Earth-Moon collinear libration point to the triangle point using the Sun-Earth/Moon libration point. Finally, the merits and drawbacks of the three schemes are discussed in terms of flight time, control energy and frequency, flight distance, and goal value. As a result, the scheme including a lunar return and the Earth-Moon L2 libration point is selected for the CHANG’E-5T1 extended mission. A flight to the Earth-Moon libration point is achieved, replicating the achievement of the ARTEMIS mission.     

机载电子电气设备缓蚀剂的评价

采用塔菲尔(Tafel)曲线法和电化学阻抗法(EIS)2种电化学方法评价了 4种不同型号的电子电气缓蚀剂在天然海水中对 T2铜合金、H62铜合金以及 2Al2-T4铝合金的缓蚀效果。对于 T2铜合金,缓蚀剂的缓蚀效率从高至低依次为 DZ-1、TFHS-20、DJB-823、WD-40;对于 H62铜合金,缓蚀效率从高至低依次为 DZ-1、DJB-823、WD-40、 TFHS-20;对于 2Al2-T4铝合金,缓蚀效率从高至低依次为 DZ-1、WD-40、DJB-823、TFHS-20。4种缓蚀剂中,DZ-1缓蚀剂 Tafel曲线法和 EIS法得到的缓蚀效率都高于 99.5%,所以,对于 T2铜合金、H62铜合金以及 2Al2-T4铝合金 3种金属材料来说,DZ-1是 4个型号的缓蚀剂中效果最优的。     

Algorithm and experiments of six-dimensional force/torque dynamic measurements based on a Stewart platform

Stewart platform (SP) is a promising choice for large component alignment, and interac-tive force measurements are a novel and significant approach for high-precision assemblies. The designed position and orientation (P&O) adjusting platform, based on an SP for force/torque-driven (F/T-driven) alignment, can dynamically measure interactive forces. This paper presents an analytical algorithm of measuring six-dimensional F/T based on the screw theory for accurate determination of external forces during alignment. Dynamic gravity deviations were taken into con-sideration and a compensation model was developed. The P&O number was optimized as well. Given the specific appearance of repeated six-dimensional F/T measurements, an approximate cone shape was used for spatial precision analysis. The magnitudes and directions of measured F/Ts can be evaluated by a set of standards, in terms of accuracy and repeatability. Experiments were also performed using a known applied load, and the proposed analytical algorithm was able to accu-rately predict the F/T. A comparison between precision analysis experiments with or without assem-bly fixtures was performed. Experimental results show that the measurement accuracy varies under different P&O sets and higher loads lead to poorer accuracy of dynamic gravity compensation. In addition, the preferable operation range has been discussed for high-precision assemblies with smal-ler deviations.