CFRP/TC4叠层结构制孔技术对比实验

因CFRP、TC4材料的物理性能差异较大，导致CFRP/TC4叠层构件切削性能匹配性较差，钻削过程中存在界面损伤、CFRP孔壁损伤难以调控的问题。针对上述问题，本文采用变参数啄式钻削工艺、变参数钻削工艺和恒参数钻削工艺对CFRP/TC4叠层结构进行了制孔实验，并对不同工艺条件下的轴向力、界面质量、TC4的切屑形态、CFRP层孔壁质量进行了对比分析。结果表明：相对于其他两种钻削工艺，在变参数啄式钻削工艺条件下，TC4材料层轴向力明显较高，产生短带状和短螺旋状切屑；CFRP层出口和入口处的孔径更接近于名义孔径，孔壁缺陷较少，表面粗糙度相对较小。     

Detection of surface temperature anomaly of the Sea of Marmara

Monitoring sea surface temperature (SST) over a long-term and detecting the anomalies highly contribute to understanding the prevailing water quality of the sea. Earth observation satellite images are the key data sources that offer the long-term SST detection in a cost and time effective way. Since the Sea of Marmara in Türkiye is surrounded by the highly populated provinces, the water quality of the sea has gained importance for scientific and public communities over the years. This article emphasizes on the significance of detecting SST trend and corresponding anomalies of the Sea of Marmara over the past 32 years. To address the SST variations of the Sea of Marmara in time, a comprehensive set of both field and satellite data regarding SSTs were obtained within the context of this study. The SST trend and its anomalies between the years 1990 and 2021 were detected by applying Seasonal-Trend decomposition procedure based on LOESS (STL) method to NOAA OISST V2 data. On the other hand, spatial SST distribution was detected with Landsat-8, Sentinel-3 and NOAA OISST V2 satellite data. SST results were verified with the in-situ data within the scope of accuracy assessment. The results showed that SST time-series data performed an increasing trend and had anomalies mostly during the spring months in the recent years.     

SiC_(f)/SiC复合材料铣削加工表面质量北大核心CSCD

使用PCD立式铣刀对聚合物浸渍裂解法(PIP)制备的SiC_(f)/SiC复合材料开展单因素铣削试验,通过对加工中产生的切削力和加工后的表面粗糙度进行测量,分析了铣削工艺参数对其的影响;对加工表面、纤维断口进行SEM分析,讨论了SiC_(f)/SiC复合材料加工表面的形成。研究结果表明,表面粗糙度与切削力的变化趋势相同,高主轴转速和小切削宽度有利于得到表面粗糙度较小的加工表面;近孔洞区域与远离孔洞区域的材料去除方式不同;材料中纤维发生面内偏移和层间屈曲,纤维存在多种去除方式。     

表面粗糙度对高辐射涂层发射率的影响

以氧化铁、碳化硅和氧化钴为高辐射填料,通过控制涂层浆料固含量和喷涂次数制备出了不同表
面粗糙度的高辐射涂层。用AE 辐射计测试了不同表面粗糙度高辐射涂层的室温发射率,根据GB/ T 7287—
2008 测试了涂层的800℃高温发射率,用扫描电子显微镜和光学显微镜观察了涂层表面形貌,用扫描探针显微
镜测试了涂层的表面粗糙度。结果表明,在辐射换热条件下高辐射涂层表面粗糙度在2. 75 ~225. 70 μm 变化
时,其室温发射率发生了0. 02 ~ 0. 05 的变化。而在导热换热条件下高辐射涂层表面粗糙度在2. 75 ~ 36. 99
μm 变化时,其高温发射率没有变化。     

碳纤维表面状态对C/C复合材料性能影响的研究

用两种经高温处理的碳纤维织物,以酚醛树脂作为基体先驱体,制备了二维C／C复合材料。通过扫描电镜（SEM）,X－射线光电子能谱（XPS）研究了两种碳纤维（TCF和JCF）的表面状态,测试了C／C复合材料（TCC和JCC）的层间剪切强度,拉伸性能,SEM观察表明,TCF及JCF表面都有沟槽,但TCF横断面呈腰子形非圆形,XPS分析表明TCF表面含氧官能团数量多,力学测试结果为：TCC层间剪切强度（ILSS）高于JCC,达到16．1MPa;TCC拉伸强度,模量均高于JCC,而JCC断裂延伸率达1．1％,是TCC的3倍,拉伸断口SEM分析表明,TCC断口平整,无纤维拔出,呈脆断,JCC断口有纤维拨出,是纤维控制的多层基体断裂。     

进给速度对MI工艺制备SiCf/SiC复合材料加工损伤的影响

采用超声辅助磨削对MI工艺制备的SiC_f/SiC复合材料表面进行磨削加工，研究了进给速度对复合材料性能的影响。结果表明：采用超声辅助磨削加工SiC_f/SiC复合材料表面时，加工区域出现纤维脱粘、断裂、破碎及基体裂纹和脱落现象，且纤维与基体界面会有裂纹产生。当进给速度提高时，复合材料表面损伤加重，导致其比例极限强度和最大载荷降低。进给速度由400 mm/min提高至1 000 mm/min时，SiC_f/SiC复合材料的拉伸强度和弯曲强度分别降低4.7%和20.6%。     

干式铣削Al-50wt%Si高硅铝合金刀具磨损与表面粗糙度评价

本文以Al-50wt%Si高硅铝合金为研究对象，采用单因素试验方法进行无涂层硬质合金刀具干式铣削试验，分析切削参数对刀具磨损和表面粗糙度的影响。结果表明：表面粗糙度受每齿进给量的影响最显著，随每齿进给量的增加而增加，当每齿进给量从0.07 mm/z增加到0.16 mm/z时，表面粗糙度增加2倍；刀具磨损受切削速度的影响最显著，随切削速度的增加而增加，当切削速度从140 m/min增加到260 m/min时，切削总长度降低3倍，而刀具后刀面磨损量仅是260 m/min速度下的0.8倍；表面粗糙度随刀具磨损的增加呈现先增加后降低的变化趋势，切削长度从350 mm增加到1 750 mm，刀具磨损量平均增加4.5倍，而表面粗糙度却下降2倍；硬质合金刀具主要的磨损形式为磨粒磨损、崩刃。     

Collaborative manufacturing technologies of structure shape and surface integrity for complex thin-walled components of aero-engine: Status,challenge and tendency

Presently, the service performance of new-generation high-tech equipment is directly affected by the manufacturing quality of complex thin-walled components. A high-efficiency and quality manufacturing of these complex thin-walled components creates a bottleneck that needs to be solved urgently in machinery manufacturing. To address this problem, the collaborative manufacturing of structure shape and surface integrity has emerged as a new process that can shorten processing cycles, improve machining qualities, and reduce costs. This paper summarises the research status on the material removal mechanism, precision control of structure shape, machined surface integrity control and intelligent process control technology of complex thin-walled components. Numerous solutions and technical approaches are then put forward to solve the critical problems in the high-performance manufacturing of complex thin-wall components. The development status, challenge and tendency of collaborative manufacturing technologies in the high-efficiency and quality manufacturing of complex thin-wall components is also discussed.     

GGTm-Ts: A global grid model of weighted mean temperature (Tm) based on surface temperature (Ts) with two modes

With the development of Global Navigation Satellite System (GNSS), the detection of precipitable water vapor (PWV) using the GNSS atmospheric sounding technique becomes a research interest in GNSS meteorology. In the conversion of zenith tropospheric delay (ZTD) to PWV, the weighted mean temperature (Tm) plays a crucial role. Generally, the Tm estimated by the linear regression models based on surface temperature (Ts) cannot meet the requirement for global use, and the accuracy of Tm derived from the empirical models is limited. In this study, a new Tm model, named GGTm-Ts model, was developed using the global geodetic observing system (GGOS) atmosphere Tm data and European Centre for Medium-Range Weather Forecasts (ECMWF) data from 2011 to 2015. Resting upon a global 2.5°*2° grid of coefficients of Tm-Ts linear function, the new model can provide Tm at any site in two modes, one for the case with measured Ts provided, i.e., the accurate mode, the other for the case that Ts provided by a subroutine, i.e., the normal mode. The performance of GGTm-Ts model was assessed against the Bevis formula, GPT2w and GPT2wh model using different data sources in 2016-the GGOS atmosphere and radiosonde data. The results show that the GGTm-Ts model in accurate mode achieves best performance with an improvement of 46.9 %/15.3 %, 37.8 %/19.5 % and 34.4 %/14.2 % over other three models in the GGOS atmosphere/radiosonde comparison. For the normal mode, the GGTm-Ts model outperforms the GPT2w model and achieves equivalence results with the GPT2wh model. Moreover, the impact of Tm on GNSS-PWV was analyzed to validate the performance of the GGTm-Ts model.     

空间级硅橡胶胶黏剂粘结界面改性分析

针对空间级硅橡胶与聚酰亚胺的粘结界面呈现低表面能、粘结可靠性差的现状，利用有机硅烷的润湿和键结作用对界面进行预处理，改善其粘结强度。通过FTIR、¹H-NMR和GC-MS分析，有机硅烷的主要成分中对粘结性能影响较大的是正硅酸丁酯和丙基三甲基硅氧烷，采用两种偶联剂对聚合物表面进行预处理，在聚合物间不同均相结构层通过硅烷相互扩散和互穿网络形成的分子桥可实现致密交联。力学试验表明，经有机硅烷对待粘结界面表面预处理，粘结构件的剪切强度值可达0.65 MPa；选择适当的有机硅烷作为附着力促进剂，利用其有机官能团、成膜性和交联性可提高粘结构件的可靠性。